Simulation of electron-beam treatment of material surface using b and ti modifying particles participating in physical-chemical transformations; Известия вузов. Физика; Т. 57, № 10, ч. 3

Simulation of electron-beam treatment of material surface using b and ti modifying particles participating in physical-chemical transformations; Известия вузов. Физика; Т. 57, № 10, ч. 3

Λεπτομέρειες βιβλιογραφικής εγγραφής
Parent link:	Известия вузов. Физика/ Национальный исследовательский Томский государственный университет (ТГУ).— , 1958- Т. 57, № 10, ч. 3.— 2014.— [С. 42-45]
Κύριος συγγραφέας:	Kryukova O. N. Olga Nikolaevna
Συγγραφή απο Οργανισμό/Αρχή:	Национальный исследовательский Томский политехнический университет (ТПУ) Институт физики высоких технологий (ИФВТ) Кафедра физики высоких технологий в машиностроении (ФВТМ)
Άλλοι συγγραφείς:	Knyazeva A. G. Anna Georgievna
Περίληψη:	Заглавие с экрана The model is suggested for the process of electron beam surfacing with modifying particles of boron and titanium with regard to physical-chemical transformations. The dissolution process is described on the basis of formal kinetic approach. The result of numerical solution consists in the phase and chemical composition of the coating forming under no equilibrium conditions, that is one of the important characteristics of the coating forming during electron beam surfacing. Режим доступа: по договору с организацией-держателем ресурса
Γλώσσα:	Αγγλικά
Έκδοση:	2014
Θέματα:	электронный ресурс труды учёных ТПУ numerical simulation electron-beam treatment phase composition электронно-пучковая обработка фазовый состав
Διαθέσιμο Online:	https://elibrary.ru/item.asp?id=22980193
Μορφή:	Ηλεκτρονική πηγή Κεφάλαιο βιβλίου
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=656399

Παρόμοια τεκμήρια

Numerical study of the influence of the technological parameters on the composition and stressed-deformed state of a coating synthesized under electron-beam heating; Theoretical Foundations of Chemical Engineering; Vol. 44, iss. 2
από: Sorokova S. N. Svetlana Nikolaevna
Έκδοση: (2010)

Model of crystallization of a melt containing nonsoluble particles; Russian Physics Journal; Vol. 53, iss. 4
από: Kryukova O. N. Olga Nikolaevna
Έκδοση: (2010)

Simulation of forming diffusion zone at impulse electron-beam treatment of coated material; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 1
από: Bukrina N. V.
Έκδοση: (2007)

Increasing the Fatigue Durability of an 3D-Printed Ti-6Al-4V Alloy Electron-Beam Welded Joint by Ultrasonic Electropulsing Shock Treatment; Physics of Metals and Metallography; Vol. 123, iss. 12
Έκδοση: (2022)

Numerical simulation of solid-phase ignition of metallized condensed matter by a particle heated to a high temperature; Russian Journal of Physical Chemistry B; Vol. 5, iss. 6
από: Glushkov D. O. Dmitry Olegovich
Έκδοση: (2011)

Effect of Ultrasonic Impact Treatment on Microstructure and Fatigue Life of 3D Printed Ti–6Al–4V Titanium Alloy; Physics of Metals and Metallography; Vol. 124, iss. 10
Έκδοση: (2023)

Change in the Phase Composition and Lattice Parameters of the Solid Solution Based on a-Ti in the Surface Layers of the Ti–6Al–4V Alloy Subjected to Electron-Beam Treatment; Physics of Metals and Metallography; Vol. 121, iss. 2
από: Perevalova O. B. Olga Borisovna
Έκδοση: (2020)

Numerical simulation of the features and regularities of the high-power density ion beam formation; Energy Fluxes and Radiation Effects (EFRE); International Conference on Modification of Materials with Particle Beams and Plasma Flows (16th CMM)
από: Ryabchikov A. I. Aleksandr Ilyich
Έκδοση: (2022)

Effect of surface activation and internal mechanical stress on the diffusion of oxygen atoms in TiNi alloys in electron beam treatment; Physical Mesomechanics; Vol. 14, iss. 1-2
από: Knyazeva A. G. Anna Georgievna
Έκδοση: (2011)

Microstructure and Phase Composition of 3D Printed Titanium Metal Matrix Composites Based on Ti-Al-V-Fe System and Reinforced with TiC Particles; Russian Physics Journal; Vol. 67, iss. 9
Έκδοση: (2024)

In situ study of phase transformations in electron beam additive manufactured Ti-6Al-4 V titanium alloy by high temperature synchrotron X-ray diffraction and TEM; Journal of Alloys and Compounds; Vol. 917
από: Perevalova O. B. Olga Borisovna
Έκδοση: (2022)

A Mathematical Model of Industrial Waste-Derived Fuel Droplet Combustion in High-Temperature Air; Applied Sciences; Vol. 12, iss. 23
Έκδοση: (2022)

Numerical Simulation of the Effect of an Electron Beam on the Surface of Materials; Energy Fluxes and Radiation Effects (EFRE-2020 online)
από: Ashurova K. Kamilla
Έκδοση: (2020)

Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment Part III: Combination with Electrospark Alloying Applied to Additively Manufactured Ti-6Al-4V Titanium Alloy; Metals; Vol. 13, iss. 5
Έκδοση: (2023)

Effect of Surface Electropulsing Assisted Ultrasonic Impact Treatment on the Microstructure, Phase Composition, and Microhardness of 3D Printed Ti-6Al-4V Alloy; Physics of Metals and Metallography; Vol. 122, iss. 7
από: Perevalova O. B. Olga Borisovna
Έκδοση: (2021)

The Effect of Electropulsing-Assisted Ultrasonic Impact Treatment on the Microstructure, Phase Composition, and Microhardness of Electron-Beam-Welded 3D Printed Ti-6Al-4V Alloy; Physics of Metals and Metallography; Vol. 123, iss. 9
Έκδοση: (2022)

Crowd Behavior Simulation of Pedestrians During Evacuation Process DEM-Based Approach /
από: Abd Rahman, Noorhazlinda
Έκδοση: (2019)

Electron Beam Impact on Microstructure and Microhardness of Ti–6Al–4V Titanium Alloy Produced by Wire Electron-Beam Additive Manufacturing Technology and Selective Laser Alloying at Simulation of Electronic-Beam Welding; Physics of Metals and Metallography; Vol. 125, iss. 7
Έκδοση: (2024)

Phase transformations in ferrites during radiation-thermal sintering; Eurasian Physical Technical Journal; Vol. 17, № 1 (33)
Έκδοση: (2020)

Investigation of the Change in the Phase Composition, Properties, and Hydraulic Activity During the Thermal Treatment of Magnesian Materials; Refractories and Industrial Ceramics; Vol. 58, iss. 3
από: Mitina N. A. Nataliya Aleksandrovna
Έκδοση: (2017)

Structure and phase composition of tungsten alloys modified by compression plasma flows and high-intense pulsed ion beam impacts; Applied Surface Science; Vol. 491
Έκδοση: (2019)

Effect of Surface Modification of a Titanium Alloy by Copper Ions on the Structure and Properties of the Substrate-Coating Composition; Metals; Vol. 10, iss. 12
Έκδοση: (2020)

Рентгенодифракционные исследования структурно-фазовых состояний в поверхностных слоях никелида титана, модифицированных электронно-пучковой обработкой; Известия Томского политехнического университета [Известия ТПУ]; Т. 324, № 3 : Химия и химические технологии
Έκδοση: (2014)

High-Speed Surface Temperature Measurement in TiCoated Aluminum During Electron Beam Irradiation; 20th International Symposium on High-Current Electronics (ISHCE)
Έκδοση: (2018)

Mesoscopic Structural States at the Nanoscale in Surface Layers of Titanium and Its Alloy Ti-6Al-4V in Ultrasonic and Electron Beam Treatment; Physical Mesomechanics; Vol. 22, iss. 5
Έκδοση: (2019)

Influence of Aerodynamic Abrasive Treatment on the Phase State of the Surface Layer of Ceramics of Partially Stabilized Zirconium Dioxide; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 15, iss. 3
από: Gyngazov (Ghyngazov) S. A. Sergey Anatolievich
Έκδοση: (2021)

Continuous Electron Beam Post-Treatment of EBF3-Fabricated Ti-6Al-4V Parts; Metals; Vol. 9, iss. 6
Έκδοση: (2019)

Experimental research and numerical simulation of gel fuel ignition by a hot particle; Fuel; Vol. 291
Έκδοση: (2021)

Simulation of injection and capture of beam electrons in small-size betatrons by the method of macroparticles; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 1
από: Grigoriev V. P.
Έκδοση: (2007)

The use of low-temperature plasma in a combined technology for the formation of wear-resistant boron-containing coatings; Surface and Coatings Technology; Vol. 389
Έκδοση: (2020)

In Situ Synchrotron Study of the Phase Transformations in Ti-5.7Al-1.6V-3Mo Titanium Alloy at High Temperature; Journal of Materials Engineering and Performance; Vol. 33, iss. 19
από: Perevalova O. B. Olga Borisovna
Έκδοση: (2024)

Evaluating the freeze–thaw phenomenon in sandwich-structured composites via numerical simulations and infrared thermography; Journal of Thermal Analysis and Calorimetry; Vol. 84, iss. 1
Έκδοση: (2020)

Microstructure Formation and Mechanical Properties of Metastable Titanium-Based Gradient Coating Fabricated via Intense Pulse Ion Beam Melt Mixing; Materials; Vol. 16, iss. 8
Έκδοση: (2023)

Effect of Irradiation with a Pulsed Electron Beam on Chromium Diffusion in the Zr–1 wt % Nb Alloy; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 6
Έκδοση: (2024)

Effect of Ultrasonic Impact Treatment on Structural Phase Transformations in Ti-6Al-4V Titanium Alloy; Physical Mesomechanics; Vol. 25, iss. 3
Έκδοση: (2022)

Ion-Plasma Spraying and Electron-Beam Treatment of Composite Cr-Al-Co-ZrO2-Y2O3 Coating on the Surface of Ni-Cr Alloy; Coatings; Vol. 11, iss. 3
Έκδοση: (2021)

Synthesis of MAX-Phase Ti3SiC2 by Combined Powder Metallurgy Technique; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 6
Έκδοση: (2024)

Basic Models of Volume Synthesis of Ti-Based Composites; Advanced Materials and Technologies; № 3
από: Knyazeva A. G. Anna Georgievna
Έκδοση: (2018)

Ti3SiC2 MAX-Phase-Based Composites Produced by Vacuum and Spark Plasma Sintering; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 19, iss. 5
Έκδοση: (2025)

Effect of vacuum arc ion beam treatment on the structure and mechanical properties of 30CrMnSiNi2A steel; Physical Mesomechanics; Vol. 19, iss. 4
Έκδοση: (2016)