Ultrasonic-assisted aging in friction stir welding on Al-Cu-Li-Mg aluminum alloy; Welding in the World; Vol. 61, iss. 4

Ultrasonic-assisted aging in friction stir welding on Al-Cu-Li-Mg aluminum alloy; Welding in the World; Vol. 61, iss. 4

Bibliografische gegevens
Parent link:	Welding in the World Vol. 61, iss. 4.— 2017.— [P. 679-690]
Coauteurs:	Национальный исследовательский Томский политехнический университет (ТПУ) Физико-технический институт (ФТИ) Кафедра экспериментальной физики (ЭФ), Национальный исследовательский Томский политехнический университет (ТПУ) Институт физики высоких технологий (ИФВТ) Кафедра физики высоких технологий в машиностроении (ФВТМ)
Andere auteurs:	Tarasov S. Yu. Sergei Yulievich, Rubtsov V. E. Valery Evgenjevich, Fortuna S. V. Sergey Valerjevich, Eliseev A. A. Aleksandr Andreevich, Chumaevsky A. V. Andrey Valerjevich, Kalashnikova T. A. Tatiana Alexandrovna, Kolubaev Е. А. Evgeny Aleksandrovich
Samenvatting:	Title screen Friction stir welding (FSW) on Al-Cu-Li-Mg aluminum alloy V-1469 (AA2195) has been carried out to find out the effect of ultrasonic energy on the microstructural evolution of the welded metal. It was found that ultrasonic-assisted FSW (UAFSW) reduced the recrystallized grain size in the stirring zone (SZ), facilitated strain-induced dissolution of both soluble and insoluble intermetallic precipitates, and enhanced solid solution grain recrystallization and precipitation of coherent metastable phases. Режим доступа: по договору с организацией-держателем ресурса
Taal:	Engels
Gepubliceerd in:	2017
Onderwerpen:	электронный ресурс труды учёных ТПУ friction stir welding ultrasonic processing microstructure residual stresses aluminum alloys hardness сварка трением ультразвуковая обработка микроструктуры остаточные напряжения алюминиевые сплавы твердость
Online toegang:	https://doi.org/10.1007/s40194-017-0447-8
Formaat:	Elektronisch Hoofdstuk
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=655942

Gelijkaardige items

Effect of ultrasound on interface morphology and strength of titanium and aluminum alloys joints produced by friction stir welding; Physical Mesomechanics; Vol. 26, iss. 1
Gepubliceerd in: (2023)

Структура сварных соединений алюминиевого сплава 1570С, полученных методом сварки трением с перемешиванием; Современные проблемы науки и образования; № 6
Gepubliceerd in: (2014)

Сканер для ультразвуковой и вихретоковой диагностики сварных соединений, полученных сваркой трением с перемешиванием; Современные проблемы науки и образования; № 6
door: Иванов А. Н. Алексей Николаевич
Gepubliceerd in: (2014)

Microstructure Evolution in Dissimilar AA6060/Copper Friction Stir Welded Joints; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
door: Kalashnikova T. V. Tatiana Vladimirovna
Gepubliceerd in: (2017)

Structure Formation of 5083 Alloy during Friction Stir Welding; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Gepubliceerd in: (2017)

Molecular Dynamics Modeling of Bonding Two Materials by Atomic Scale Friction Stir Welding at Different Process Parameters; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
door: Konovalenko I. S. Ivan Sergeevich
Gepubliceerd in: (2017)

Соединение автомобильных листовых материалов сваркой методом трения; Прогрессивные технологии и экономика в машиностроении
door: Рашитов В. Р.
Gepubliceerd in: (2021)

Thermography inspection of friction stir welding; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
Gepubliceerd in: (2014)

The Influence of Surface Friction on the AA2024 Microstructure; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
door: Eliseev A. A.
Gepubliceerd in: (2017)

Research of the current type effect and its modulation algorithm on the performance of welded joints; Welding International; Vol. 34, iss. 1-3
Gepubliceerd in: (2020)

Radiographic detection of defects in friction stir welding on aluminum alloy AMg5M; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
door: Tarasov S. Yu. Sergei Yulievich
Gepubliceerd in: (2014)

The Formation of One-Piece Bimetallic Joint Made of X6CrNiTi18-10 Steel and 36CrNiTiAl Alloy; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
door: Svyazhina N. V.
Gepubliceerd in: (2016)

Effect of Protective Coatings in Welded Constructions on Welding Stability and Electrode Metal Transfer into a Weld Pool in MMA; Solid State Phenomena; Vol. 303
Gepubliceerd in: (2020)

Molecular Dynamics Modeling of Bonding Two Materials by Atomic Scale Friction Stir Welding; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
door: Konovalenko I. S. Ivan Sergeevich
Gepubliceerd in: (2017)

Influence of Nanostructured Powder Modifiers on the Structure of a Welding Bead; Advanced Materials Research; Vol. 872
Gepubliceerd in: (2014)

Structure and Lattice Strains in the Surface Сr–Mn–N Steel Layer Formed by a Combination of Friction and Electron-Beam Treatments; Physics of Metals and Metallography; Vol. 120, iss. 11
Gepubliceerd in: (2019)

Stability of MMA welding with protective coatings; Structural Integrity and Life; Vol. 20, № 1
Gepubliceerd in: (2020)

Study of Melting Methods by Electric Resistance Welding of Rails; Metals; Vol. 12, iss. 12
Gepubliceerd in: (2022)

Structure and properties of welding joints of 1370 aluminum alloy obtained by electron-beam welding; Russian Physics Journal; Vol. 68, iss. 2
door: Solov’ev V. V. Vasily Vladimirovich
Gepubliceerd in: (2025)

Ultrasonic-Assisted Friction Stir Welding on V95AT1 (7075) Aluminum Alloy; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Gepubliceerd in: (2015)

Tuning of mechanical properties of Ti1?xAlxN coatings through Ta alloying; Surface and Coatings Technology; Vol. 382
Gepubliceerd in: (2020)

Electron Beam Welding of Dissimilar Materials; Key Engineering Materials; Vol. 743 : High Technology: Research and Applications (HTRA 2016)
door: Frolov V. A.
Gepubliceerd in: (2017)

Improvement of Research Procedures into the Highly Rigid Welded Metal Using Thermal Microscopy Facilities; Materials Science Forum; Vol. 927 : Materials and Processing Technology II
Gepubliceerd in: (2018)

Surface Vaporization of High-Strength Aluminum Alloy During Electron-Beam Welding; Russian Physics Journal; Vol. 65, iss. 3
Gepubliceerd in: (2022)

AA2024 Microstructural Evolution after Bidirectional Friction Stir Processing; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Gepubliceerd in: (2017)

Structural Evolution of Multiple Friction Stir Processed AA2024; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Gepubliceerd in: (2017)

Pulsed laser welding of Zr1%Nb alloy; Nuclear Engineering and Technology; Vol. 51, iss. 3
door: Yolkin M. A. Maksim Aleksandrovich
Gepubliceerd in: (2019)

Effect of ultra-disperse powder in electrode coating on properties of welds in MMA welding; Engineering Solid Mechanics; Vol. 8, iss. 1
Gepubliceerd in: (2020)

Structure and Properties of Fixed Joints Formed by Ultrasonic-Assisted Friction-Stir Welding; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Gepubliceerd in: (2015)

A computational study of the microstructural effect on the deformation and fracture of friction stir welded aluminum; Computational Materials Science; Vol. 116
Gepubliceerd in: (2016)

The Structure and Mechanical Properties of VT23 Welded Joints with Surface Layer Modified by Ultrasonic Mechanical Forging; Key Engineering Materials; Vol. 743 : High Technology: Research and Applications (HTRA 2016)
Gepubliceerd in: (2017)

Effect of the structure and the phase composition on the mechanical properties of Al–Cu–Li alloy laser welds; Materials Science and Engineering: A; Vol. 809
Gepubliceerd in: (2021)

Quality of Metal Deposited Flux Cored Wire with the System Fe-C-Si-Mn-Cr-Mo-Ni-V-Co; Key Engineering Materials; Vol. 736 : Materials and their Application
Gepubliceerd in: (2017)

Comparative Analysis of Weld Microstructure in Ti-6Al-4V Samples Produced by Rolling and Wire-Feed Electron Beam Additive Manufacturing; Physical Mesomechanics; Vol. 26, iss. 6
Gepubliceerd in: (2023)

The Effect of Advanced Ultrasonic Forging on Fatigue Fracture Mechanisms of Welded Ti-6А1-4V Alloy; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Gepubliceerd in: (2017)

Theoretical study of the influence of technological friction stir welding parameters on weld structure; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
Gepubliceerd in: (2015)

Increasing the Fatigue Durability of an 3D-Printed Ti-6Al-4V Alloy Electron-Beam Welded Joint by Ultrasonic Electropulsing Shock Treatment; Physics of Metals and Metallography; Vol. 123, iss. 12
Gepubliceerd in: (2022)

Ultrasonic impact treatment of the welded joint of aluminum-magnesium alloy produced by friction stir welding; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
Gepubliceerd in: (2014)

Friction welding; Неразрушающий контроль; Т. 3
door: Nikiforov D. S.
Gepubliceerd in: ()

The impact of ultrasonic post-manufacturing on the microstructure of the metallic sheet-based triply periodic minimal surfaces manufactured by electron beam melting; Перспективы развития фундаментальных наук; Т. 1 : Физика
door: Khrapov D. Dmitriy
Gepubliceerd in: (2023)