Methods of Increasing Strength of Aluminosilicate Ceramics Based on Semi-Flint Clay Raw Materials
| Parent link: | Key Engineering Materials: Scientific Journal Vol. 743 : High Technology: Research and Applications (HTRA 2016).— 2017.— [P. 426-430] |
|---|---|
| Autor principal: | |
| Autor Corporativo: | |
| Otros Autores: | , |
| Sumario: | Title screen The paper investigates the peculiarities of the chemical and mineralogical compositions of semi-flint kaolins and their behavior under heating up to 1500 °C. It was found that the sintering process of kaolin clay raw materials depends on the temperature of their preliminary calcining, method of milling after the thermal treatment and application of mineralizing additives. In the case of Borovichy kaolin, preliminary calcining at 850 °C and 980 °C and its subsequent milling increase the material strength after sintering calcining at the temperature of 1400–1450 °C at the expense of uniform sintering and the formation of a homogeneous microstructure of sintered material. Режим доступа: по договору с организацией-держателем ресурса |
| Lenguaje: | inglés |
| Publicado: |
2017
|
| Materias: | |
| Acceso en línea: | http://dx.doi.org/10.4028/www.scientific.net/KEM.743.426 |
| Formato: | Electrónico Capítulo de libro |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=655492 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 655492 | ||
| 005 | 20231219163403.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\21621 | ||
| 035 | |a RU\TPU\network\21618 | ||
| 090 | |a 655492 | ||
| 100 | |a 20170906a2017 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 105 | |a y z 100zy | ||
| 135 | |a drgn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Methods of Increasing Strength of Aluminosilicate Ceramics Based on Semi-Flint Clay Raw Materials |f T. V. Vakalova, L. P. Devyashina, A. P. Potapova | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 330 | |a The paper investigates the peculiarities of the chemical and mineralogical compositions of semi-flint kaolins and their behavior under heating up to 1500 °C. It was found that the sintering process of kaolin clay raw materials depends on the temperature of their preliminary calcining, method of milling after the thermal treatment and application of mineralizing additives. In the case of Borovichy kaolin, preliminary calcining at 850 °C and 980 °C and its subsequent milling increase the material strength after sintering calcining at the temperature of 1400–1450 °C at the expense of uniform sintering and the formation of a homogeneous microstructure of sintered material. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\11477 |t Key Engineering Materials |o Scientific Journal | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\21014 |t Vol. 743 : High Technology: Research and Applications (HTRA 2016) |o The V International Science and Engineering Conference, Decembe 5-7, 2016, Tomsk, Russia |o [proceedings] |f National Research Tomsk Polytechnic University (TPU) ; eds. G. E. Osokin ; E. A. Kulinich |v [P. 426-430] |d 2017 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a каолины | |
| 610 | 1 | |a добавки | |
| 610 | 1 | |a синтез | |
| 610 | 1 | |a муллиты | |
| 610 | 1 | |a глины | |
| 610 | 1 | |a спекание | |
| 610 | 1 | |a kaolin | |
| 610 | 1 | |a mineralizing additives | |
| 610 | 1 | |a mullite synthesis | |
| 610 | 1 | |a semi-flint clays | |
| 610 | 1 | |a sintering | |
| 700 | 1 | |a Vakalova |b T. V. |c Chemical Engineer |c Professor of Tomsk Polytechnic University, Doctor of Technical Sciences |f 1956- |g Tatyana Viktorovna |3 (RuTPU)RU\TPU\pers\29338 |9 13924 | |
| 701 | 1 | |a Devyashina |b L. P. |c Chemical engineer |c Expert of Tomsk Polytechnic University |f 1989- |g Larisa Pavlovna |3 (RuTPU)RU\TPU\pers\39306 | |
| 701 | 1 | |a Potapova |b A. P. |g Anastasia | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Институт физики высоких технологий (ИФВТ) |b Кафедра технологии силикатов и наноматериалов (ТСН) |3 (RuTPU)RU\TPU\col\18694 |
| 801 | 2 | |a RU |b 63413507 |c 20170906 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.4028/www.scientific.net/KEM.743.426 | |
| 942 | |c CF | ||