The Effect of a Severe Plastic Deformation by Groove Pressing on the Grain Structure of the Al-Mg Alloy; Key Engineering Materials; Vol. 743 : High Technology: Research and Applications (HTRA 2016)
| Parent link: | Key Engineering Materials: Scientific Journal Vol. 743 : High Technology: Research and Applications (HTRA 2016).— 2017.— [P. 187-190] |
|---|---|
| 企業作者: | |
| 其他作者: | , , , |
| 總結: | Title screen In this article, the effect of a severe plastic deformation (SPD) achieved by groove pressing (GP) on the grain structure and mechanical properties of a rolled sheet Al-Mg alloy was investigated. The study of the microstructure of the samples before and after processing was carried out by means of electron backscattered diffraction (EBSD). The mechanical properties of the samples were experimentally studied under uniaxial tension in quasi-static conditions, and microhardness testing was implemented. It was found that the conventional yield strength and ultimate tensile strength increase by the factor of 1.4 and 1.5, respectively; and the microhardness increases by approximately 2.7 times after four machining sequences of the rolled sheet alloy. A bimodal grain structure, consisting of two grain types with particular features, is formed in the samples after four machining sequences of GP. Режим доступа: по договору с организацией-держателем ресурса |
| 語言: | 英语 |
| 出版: |
2017
|
| 主題: | |
| 在線閱讀: | http://dx.doi.org/10.4028/www.scientific.net/KEM.743.187 |
| 格式: | 電子 Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=655457 |
相似書籍
Changes in the Structural-Phase State and Dislocation Density of Ti49.8Ni50.2 Alloy Depending on the Isochronal Annealing Temperature after Severe Plastic Deformation by abc Pressing at 573 K; Physical Mesomechanics; Vol. 27, iss. 2
出版: (2024)
出版: (2024)
Influence of Equal-Channel Angular Pressing on Grain Structure and Internal Stresses of Technically Pure Nickel; Russian Physics Journal; Vol. 65, iss. 9
出版: (2023)
出版: (2023)
Structure, phase composition and mechanical properties in bioinert zirconium-based alloy after severe plastic deformation; Письма о материалах; Т. 7, № 4 (28)
出版: (2017)
出版: (2017)
Evolution of microstructure and mechanical properties of Ti-Nb-Zr and Ti-Nb-Zr-Ta-Sn alloys in severe plastic deformation; Materials Letters; Vol. 382
出版: (2025)
出版: (2025)
Influence of Severe Plastic Deformation by Extrusion on Microstructure, Deformation and Thermal Behavior under Tension of Magnesium Alloy Mg-2.9Y-1.3Nd; Metals; Vol. 13, iss. 5
出版: (2023)
出版: (2023)
Severe Plastic Deformation of Mg–Zn–Zr–Ce Alloys: Advancing Corrosion Resistance and Mechanical Strength for Medical Applications; Metals; Vol. 13, iss. 11
出版: (2023)
出版: (2023)
Structure and Phase Composition of Ultrafine-Grained TiNb Alloy after High-Temperature Annealings; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
出版: (2017)
出版: (2017)
Microstructure Stability and Mechanical Properties of Ultrafine-Grained Zirconium Alloy under Prolonged Thermal Exposure; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
出版: (2016)
出版: (2016)
Research on the processes of deformation and failure in coarse- and ultrafine-grain states of Zr1–Nb alloys by digital image correlation and infrared thermography; Materials Science and Engineering: A; Vol. 784
出版: (2020)
出版: (2020)
Influence of ultrafine-grained structure of Ti-42Nb-7Zr alloy on energy dissipation and storage under quasi-static tension; Materials Letters; Vol. 375
出版: (2024)
出版: (2024)
Influence of Zr-1 wt.% Nb alloy structure state on its deformation and thermal behavior under quasi-static tension; Materials Letters; Vol. 285
出版: (2021)
出版: (2021)
Effect of Hydrogen on the Deformation Behavior and Localization of Plastic Deformation of the Ultrafine-Grained Zr–1Nb Alloy; Metals; Vol. 10, iss. 5
出版: (2020)
出版: (2020)
Effect of Severe Plastic Deformation by Extrusion on Microstructure and Physical and Mechanical Properties of Mg–Y–Nd and Mg–Ca Alloys; Technical Physics; Vol. 67, iss. 12
出版: (2022)
出版: (2022)
Structure and Deformation Properties of Austenitic Stainless Steel; Physics of Metals and Metallography; Vol. 121, iss. 1
出版: (2020)
出版: (2020)
Comparative Investigation of the Influence of Ultrafine-Grained State on Deformation and Temperature Behavior and Microstructure Formed during Quasi-Static Tension of Pure Titanium and Ti-45Nb Alloy by Means of Infrared Thermography; Materials; Vol. 15, iss. 23
出版: (2022)
出版: (2022)
The morphology of the deformation relief and the grain boundary role in the bicrystals of AISI 316 steel; Solid State Sciences; Vol. 99
由: Alferova (Alfyorova) E. A. Ekaterina Aleksandrovna
出版: (2020)
由: Alferova (Alfyorova) E. A. Ekaterina Aleksandrovna
出版: (2020)
Effect of the structural and phase state on the deformation behavior and mechanical properties of the ultrafine-grained titanium alloy (Ti-Al-V-Мо) at temperatures in the range of 293-973 K; Materials Science and Engineering: A; Vol. 800
出版: (2021)
出版: (2021)
Закономерности изнашивания титановых сплавов ПТ-3В и ВТ6 с крупнозернистой и ультрамелкозернистой структурой; Известия Томского политехнического университета [Известия ТПУ]; Т. 325, № 2 : Математика, физика и механика
由: Круковский К. В. Константин Витальеви
出版: (2014)
由: Круковский К. В. Константин Витальеви
出版: (2014)
Grain boundary sliding and rotational mechanisms of intragranular deformation at different creep stages of high-purity aluminum polycrystals at various temperatures and stresses; Materials Science and Engineering: A; Vol. 733
出版: (2018)
出版: (2018)
Влияние равноканального углового прессования на структуру и свойства антифрикционного сплава Al-40Sn; Известия Томского политехнического университета [Известия ТПУ]; Т. 323, № 2 : Математика и механика. Физика
由: Скоренцев А. Л. Александр Леонидович
出版: (2013)
由: Скоренцев А. Л. Александр Леонидович
出版: (2013)
Macrosegmentation and strain hardening stages in copper single crystals under compression; International Journal of Plasticity; Vol. 69
出版: (2015)
出版: (2015)
Hydrogen Effect on the Evolution of the Structural-Phase State and Superplastic Properties of Ultrafine-Grained Ti-Al-V-Mo Alloy; Physical Mesomechanics; Vol. 25, iss. 5
出版: (2022)
出版: (2022)
The Effect of Plasticizers and Moisture on the Pressing Process and the Properties of Ceramic Products Based on Zirconium Dioxide; Russian Physics Journal; Vol. 63, iss. 11
出版: (2021)
出版: (2021)
Lattice Curvature and Mesoscopic Strain-Induced Defects as the Basis of Plastic Deformation in Ultrafine-Grained Metals; Physical Mesomechanics; Vol. 21, iss. 5
由: Panin V. E. Viktor Evgenyevich
出版: (2018)
由: Panin V. E. Viktor Evgenyevich
出版: (2018)
Thermoelectric Method of Plastic Deformation Detection; Materials Science Forum; Vol. 938 : Materials and Technologies in Mechanical Engineering
出版: (2018)
出版: (2018)
Structure and Deformation Behavior of Ultrafine-Grained Zr-2.5Nb Alloy; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
出版: (2017)
出版: (2017)
Accumulation of Defects under Plastic Deformation of Polycrystalline Copper-Based Alloys; Physics of the Solid State; Vol. 64, iss. 11
出版: (2022)
出版: (2022)
Regularities of Macroscopic Localization of Plastic Deformation in the Stretching of a Low-Carbon Steel; Russian Physics Journal; Vol. 57, iss. 3
出版: (2014)
出版: (2014)
Effect of hydrogen on the structural and phase state and the deformation behavior of the ultrafine-grained Zr–1Nb alloy; Journal of Alloys and Compounds; Vol. 645, iss. 1 suppl. : Proceedings from the 14th International Symposium on Metal-Hydrogen Systems: Fundamentals and Applications, 2014 (MH2014)
由: Stepanova E. N. Ekaterina Nikolaevna
出版: (2015)
由: Stepanova E. N. Ekaterina Nikolaevna
出版: (2015)
Влияние деформационно-термической обработки (a+b)-сплавов титана ВТ6 и ВТ22 на их коррозионную стойкость; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 334, № 4
出版: (2023)
出版: (2023)
Speckle Pattern of the Surface Layer of Titanium Alloy GRADE 2 and Steel 3723HR Samples under Deformation; Materials Science Forum; Vol. 938 : Materials and Technologies in Mechanical Engineering
出版: (2018)
出版: (2018)
Экспериментальное исследование качества поверхностного слоя детали после токарной обработки алюминиевого сплава В95 с крупнокристаллической и ультрамелкозернистой структурой; Инновационные технологии в машиностроении
由: Шамарин Н. Н. Николай Николаевич
出版: (2019)
由: Шамарин Н. Н. Николай Николаевич
出版: (2019)
Исследование тонкой структуры элементов кабеля технических сверхпроводников на основе сплава Nb-Ti при многоступенчатом волочении; Известия Томского политехнического университета [Известия ТПУ]; Т. 323, № 2 : Математика и механика. Физика
出版: (2013)
出版: (2013)
The Role of Grain Boundaries in Rotational Deformation in Polycrystalline Titanium under Scratch Testing; Physical Mesomechanics; Vol. 22, iss. 5
出版: (2019)
出版: (2019)
On the Observation of Slow Wave Processes in Deforming Rock Sample; Journal of Mining World Express; Vol. 2, iss. 2
出版: (2013)
出版: (2013)
Self-organization processes during deformation of nickel single crystals; Materials Characterization; Vol. 159
由: Alferova (Alfyorova) E. A. Ekaterina Aleksandrovna
出版: (2020)
由: Alferova (Alfyorova) E. A. Ekaterina Aleksandrovna
出版: (2020)
Manufacturing of Transparent MgAl2O4 Ceramics by Spark Plasma Sintering Combined with Collector Pressing Method; Bulletin of the Russian Academy of Sciences: Physics; Vol. 89, iss. 9
出版: (2025)
出版: (2025)
Scale-dependent subsurface deformation of metallic materials in sliding; Tribology International; Vol. 43, iss. 4
出版: (2010)
出版: (2010)
Cleaning of steel surface from scale by compression plasma flows; Surface and Coatings Technology; Vol. 255
出版: (2014)
出版: (2014)
Numerical investigation of cylindrical press-mould filling process with polymer mass by the molding method under pressure; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 2
由: Kozlobrodov А. N.
出版: (2007)
由: Kozlobrodov А. N.
出版: (2007)