The Effect of a Severe Plastic Deformation by Groove Pressing on the Grain Structure of the Al-Mg Alloy
| Parent link: | Key Engineering Materials: Scientific Journal Vol. 743 : High Technology: Research and Applications (HTRA 2016).— 2017.— [P. 187-190] |
|---|---|
| Körperschaft: | |
| Weitere Verfasser: | , , , |
| Zusammenfassung: | Title screen In this article, the effect of a severe plastic deformation (SPD) achieved by groove pressing (GP) on the grain structure and mechanical properties of a rolled sheet Al-Mg alloy was investigated. The study of the microstructure of the samples before and after processing was carried out by means of electron backscattered diffraction (EBSD). The mechanical properties of the samples were experimentally studied under uniaxial tension in quasi-static conditions, and microhardness testing was implemented. It was found that the conventional yield strength and ultimate tensile strength increase by the factor of 1.4 and 1.5, respectively; and the microhardness increases by approximately 2.7 times after four machining sequences of the rolled sheet alloy. A bimodal grain structure, consisting of two grain types with particular features, is formed in the samples after four machining sequences of GP. Режим доступа: по договору с организацией-держателем ресурса |
| Sprache: | Englisch |
| Veröffentlicht: |
2017
|
| Schlagworte: | |
| Online-Zugang: | http://dx.doi.org/10.4028/www.scientific.net/KEM.743.187 |
| Format: | Elektronisch Buchkapitel |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=655457 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 655457 | ||
| 005 | 20231101134855.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\21586 | ||
| 035 | |a RU\TPU\network\21585 | ||
| 090 | |a 655457 | ||
| 100 | |a 20170905a2017 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 105 | |a y z 100zy | ||
| 135 | |a drgn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a The Effect of a Severe Plastic Deformation by Groove Pressing on the Grain Structure of the Al-Mg Alloy |f E. N. Moskvichev [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 330 | |a In this article, the effect of a severe plastic deformation (SPD) achieved by groove pressing (GP) on the grain structure and mechanical properties of a rolled sheet Al-Mg alloy was investigated. The study of the microstructure of the samples before and after processing was carried out by means of electron backscattered diffraction (EBSD). The mechanical properties of the samples were experimentally studied under uniaxial tension in quasi-static conditions, and microhardness testing was implemented. It was found that the conventional yield strength and ultimate tensile strength increase by the factor of 1.4 and 1.5, respectively; and the microhardness increases by approximately 2.7 times after four machining sequences of the rolled sheet alloy. A bimodal grain structure, consisting of two grain types with particular features, is formed in the samples after four machining sequences of GP. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\11477 |t Key Engineering Materials |o Scientific Journal | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\21014 |t Vol. 743 : High Technology: Research and Applications (HTRA 2016) |o The V International Science and Engineering Conference, Decembe 5-7, 2016, Tomsk, Russia |o [proceedings] |f National Research Tomsk Polytechnic University (TPU) ; eds. G. E. Osokin ; E. A. Kulinich |v [P. 187-190] |d 2017 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a пластическая деформация | |
| 610 | 1 | |a канавки | |
| 610 | 1 | |a сплавы | |
| 610 | 1 | |a алюминиевые сплавы | |
| 610 | 1 | |a рассеяние | |
| 610 | 1 | |a структура | |
| 610 | 1 | |a прессование | |
| 610 | 1 | |a механические свойства | |
| 610 | 1 | |a aluminum alloy | |
| 610 | 1 | |a electron backscattered diffraction | |
| 610 | 1 | |a grain structure | |
| 610 | 1 | |a groove pressing | |
| 610 | 1 | |a mechanical properties | |
| 610 | 1 | |a severe plastic deformation | |
| 701 | 1 | |a Moskvichev |b E. N. |g Evgeny | |
| 701 | 1 | |a Skripnyak |b V. V. |g Vladimir | |
| 701 | 1 | |a Lychagin |b D. V. |c specialist in the field of mechanical engineering |c Professor of Yurga technological Institute of Tomsk Polytechnic University, Doctor of physical and mathematical sciences |f 1957- |g Dmitry Vasilievich |2 stltpush |3 (RuTPU)RU\TPU\pers\31402 | |
| 701 | 1 | |a Krasnoveikin |b V. A. |g Vladimir | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Юргинский технологический институт (филиал) (ЮТИ) |b Кафедра технологии машиностроения (ТМС) |h 356 |2 stltpush |3 (RuTPU)RU\TPU\col\18902 |
| 801 | 2 | |a RU |b 63413507 |c 20170905 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.4028/www.scientific.net/KEM.743.187 | |
| 942 | |c CF | ||