Plasma-Immersion Modification of Nitinol Surface with Silicon to Improve the Corrosion Resistance of the Alloy in Biological Media
| Parent link: | Key Engineering Materials: Scientific Journal Vol. 743 : High Technology: Research and Applications (HTRA 2016).— 2017.— [P. 129-134] |
|---|---|
| Autor corporatiu: | |
| Altres autors: | , , , |
| Sumari: | Title screen Cyclic voltammetry and potentiostatic polarization have been applied to study the electrochemical behavior and to determine the corrosion resistance of nitinol, which surface was modified with silicon using plasma-immersion ion implantation, in 0.9% NaCl solution and in artificial blood plasma. It was found out that continuous, and also homogeneous in composition, thin Si-containing layers are resistant to corrosion damage at high positive potentials in artificial physiological solutions due to the formation of stable passive films. Breakdown potential Eb of Si-modified NiTi depends on the character of silicon and Ni distribution at the alloy surface, Eb values amounted to 0.9-1.5 V (Ag/AgCl/KCl sat.) for the alloy samples with continuous Si-containing surface layers and with decreased Ni surface concentration. Режим доступа: по договору с организацией-держателем ресурса |
| Publicat: |
2017
|
| Matèries: | |
| Accés en línia: | http://dx.doi.org/10.4028/www.scientific.net/KEM.743.129 |
| Format: | Electrònic Capítol de llibre |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=655451 |
Ítems similars
Влияние модифицирования поверхностных слоев никелида титана кремнием в условиях плазменно-иммерсионной обработки на его коррозионную стойкость в хлоридсодержащих средах
Publicat: (2015)
Publicat: (2015)
Corrosion and high-temperature steam oxidation of E110 alloy and its laser welds after ion irradiation
per: Slobodyan M. S. Mikhail Stepanovich
Publicat: (2019)
per: Slobodyan M. S. Mikhail Stepanovich
Publicat: (2019)
Microstructure of titanium alloy modified by high-intensity implantation of low- and high-energy aluminium ions
Publicat: (2020)
Publicat: (2020)
Influence of Surface Modification of Nitinol with Silicon Using Plasma-Immersion Ion Implantation on the Alloy Corrosion Resistance in Artificial Physiological Solutions
Publicat: (2015)
Publicat: (2015)
Ion Plasma Passivation of X10CrNiTi18-9 Stainless Steel Samples
Publicat: (2016)
Publicat: (2016)
Surface modification of Al by high-intensity low-energy Ti-ion implantation: Microstructure, mechanical and tribological properties
Publicat: (2019)
Publicat: (2019)
Hydrogen-Permeability of Titanium-Nitride (TiN) Coatings Obtained via the Plasma-Immersion Ion Implantation of Titanium and TiN Vacuum-Arc Deposition on Zr-1%Nb Alloy
Publicat: (2018)
Publicat: (2018)
Modification of the microstructure and properties of martensitic steel during ultra-high dose high-intensity implantation of nitrogen ions
Publicat: (2020)
Publicat: (2020)
Influence of Plasma-Immersion Titanium-Ion Implantation on the Kinetics of Hydrogen Penetration into E110 Zirconium Alloy
Publicat: (2018)
Publicat: (2018)
Formation, Focusing and Transport of Highintensity, Low-Energy Metal Ion Beams
Publicat: (2021)
Publicat: (2021)
The Influence of High-Energy Krypton Ion Implantation Temperature on Structure and Properties of Ni–Ti Alloy
per: Poltavtseva V. P. Valentina Petrovna
Publicat: (2019)
per: Poltavtseva V. P. Valentina Petrovna
Publicat: (2019)
Modification of silicon under synergy of high-intensity implantation of titanium ions and energy influence of a high-power ion beam on a surface
Publicat: (2024)
Publicat: (2024)
The influence of ion irradiation on the properties of ceramic silicon carbide
Publicat: (2016)
Publicat: (2016)
Ultra high fluence implantation of aluminum ions into CP–Ti
Publicat: (2019)
Publicat: (2019)
Self-Aligned Multilayer Dielectric “DummyGate” Technology for L–, S– and X–Band GaAsMMICs Fabrication
Publicat: (2010)
Publicat: (2010)
Исследование упрочнения поверхности сталей при комбинированном ионном и лазерном воздействии
Publicat: (2014)
Publicat: (2014)
Repetitively-pulsed nitrogen implantation in titanium by a high-power density ion beam
Publicat: (2022)
Publicat: (2022)
The effect of crater creation on the fatigue strength and corrosion resistance of steels and titanium alloys irradiated by high-power pulsed ion beams
per: Shulov V. A.
Publicat: (2002)
per: Shulov V. A.
Publicat: (2002)
Low energy, high intensity metal ion implantation method for deep dopant containing layer formation
Publicat: (2018)
Publicat: (2018)
High-intensity chromium ion implantation into Zr-1Nb alloy
Publicat: (2020)
Publicat: (2020)
Special Aspects of High-Intensity Low-Energy Ion Implantation
Publicat: (2021)
Publicat: (2021)
Influence of ion implantation on mechanical properties of U8А steel and cobalt-tungsten carbide plates
Publicat: (2016)
Publicat: (2016)
Влияние структуры никелида титана на особенности процесса окисления при нагревании и на коррозионную стойкость в хлоридсодержащих растворах
Publicat: (2013)
Publicat: (2013)
Investigation of Regularities of High-Intensity Ion Implantation in Combination with Subsequent Exposure to the Surface of a High-Current Electron Beam
Publicat: (2020)
Publicat: (2020)
High Intensity low Aluminum Ion Energy Implantation into Titanium
Publicat: (2018)
Publicat: (2018)
The mathematical model of the initial stage of surface treatment with particle flux
per: Parfenova E. S. Elena Sergeevna
Publicat: (2016)
per: Parfenova E. S. Elena Sergeevna
Publicat: (2016)
Electrical and Photoelectric Properties of Polycrystalline Silicon after High-Intensity Short-Pulse Ion Implantation
per: Kabyshev A. V. Alexander Vasilievich
Publicat: (2013)
per: Kabyshev A. V. Alexander Vasilievich
Publicat: (2013)
Temperature Gradients in the Targets During High-Intensity Implantation in Forced Cooling
Publicat: (2020)
Publicat: (2020)
Влияние предварительного легирования подложки на свойства вакуумно-дуговых нитридных покрытий
per: Ильина А. С. Александра Сергеевна
Publicat: (2016)
per: Ильина А. С. Александра Сергеевна
Publicat: (2016)
Temperature gradients in targets at low energy high-intensity ion implantation
Publicat: (2020)
Publicat: (2020)
On the Hydrogen Permeability and Adhesion of TiN/Ti Coatings Produced on Zr-1% Nb Alloy by Vacuum Ion-Plasma Methods
Publicat: (2020)
Publicat: (2020)
Influence of Surface Sputtering during High-Intensity, Hot Ion Implantation on Deep Alloying of Martensitic Stainless Steel
Publicat: (2023)
Publicat: (2023)
Effect of intense electron and ion irradiation on optical absorption of boron carbide thin films
Publicat: (2018)
Publicat: (2018)
DIN 1.7035 Steel Modification with High Intensity Nitrogen Ion Implantation
Publicat: (2018)
Publicat: (2018)
Thermal Desorption of Hydrogen from Titanium, Zirconium Alloy Zr-1% Nb, and the Thin-Film Ti/Zr-1% Nb System
per: Sypchenko V. S. Vladimir Sergeevich
Publicat: (2022)
per: Sypchenko V. S. Vladimir Sergeevich
Publicat: (2022)
High-Intensity Implantation With an Ion Beam's Energy Impact on Materials
per: Ryabchikov A. I. Aleksandr Ilyich
Publicat: (2021)
per: Ryabchikov A. I. Aleksandr Ilyich
Publicat: (2021)
Особенности формирования азотированных слоев в пластически деформированной стали 40Х, обработанной интенсивными потоками ионов азота
per: Ковалевская Ж. Г. Жанна Геннадьевна
Publicat: (2014)
per: Ковалевская Ж. Г. Жанна Геннадьевна
Publicat: (2014)
Investigation of High-Intensity Implantation of Titanium Ions into Silicon under Conditions of Beam Energy Impact on the Surface
Publicat: (2024)
Publicat: (2024)
Study of the synergy effect of high-intensity aluminum ions implantation into titanium and energy impact on the surface
Publicat: (2023)
Publicat: (2023)
Low-energy high-current plasma immersion implantation of nitrogen ions in plasma of non-self-sustained arc discharge with thermionic and hollow cathodes
Publicat: (2018)
Publicat: (2018)