How to increase the efficiency of the electrical discharge method for destruction of nonconductive solid materials

How to increase the efficiency of the electrical discharge method for destruction of nonconductive solid materials

Бібліографічні деталі
Parent link:	Physics of Atomic Nuclei: Scientific Journal Vol. 79, iss. 14.— 2016.— [P. 1632–1636]
Інші автори:	Voitenko N. V. Nikita Valerievich, Yudin A. S. Artem Sergeevich, Kuznetsova N. S. Nataliya Sergeevna, Krastelev E. G. Evgeny Grigorjevich
Резюме:	Title screen The paper deals with the relevance of using electrical discharge technology for construction works in the city. The technical capabilities of the installation for the multi-borehole electro-discharge splitting off and destruction of rocks and concrete are described. The ways to increase the efficiency of the electrical discharge method for the destruction of solids are proposed. In order to augment the discharge circuit energy, the energy storage is separated into two individual capacitor batteries. The throttle with the inductance of 28.6 μH is installed in one of the batteries, which increases the duration of the channel energy release to 400 μs and the efficiency of electrical discharge splitting off of concrete. Режим доступа: по договору с организацией-держателем ресурса
Мова:	Англійська
Опубліковано:	2016
Предмети:	электронный ресурс труды учёных ТПУ электрические заряды генераторы импульсные плазменные каналы капиллярные разряды electrical discharge destruction high-current pulse generator plasma channel capillary discharge
Онлайн доступ:	http://dx.doi.org/10.1134/S1063778816140167
Формат:	Електронний ресурс Частина з книги
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=655026

Схожі ресурси

Characteristics of capillary discharge channel and its effect on concrete splitting off by electro-lasting method
за авторством: Kuznetsova N. S. Nataliya Sergeevna
Опубліковано: (2016)

Destruction of Organic Compounds in Gaseous and Liguid Media in Plasma Microwave Discharge
Опубліковано: (2016)

Simulation of pre-breakdown phase of electrical discharge in reinforced concrete
за авторством: Kuznetsova N. S. Nataliya Sergeevna
Опубліковано: (2016)

Discharge-mechanical method of rock destruction
Опубліковано: (2016)

Spatial stabilization of arc discharges in pulsed gas tungsten arc welding
Опубліковано: (2024)

Computation of current pulsed sources with inductive energy storages
за авторством: Nosov G. V.
Опубліковано: (2007)

Comparison of glow, arc, and magnetron direct current discharges
за авторством: Abrahamyan A. S.
Опубліковано: (2019)

The peculiarities of CVD diamond coatings synthesis in abnormal glow discharge plasma using repetitively-pulsed mode
за авторством: Linnik S. A. Stepan Andreevich
Опубліковано: (2016)

Физические основы неразрушающего контроля изоляции обмоток электроприводов горношахтного и нефтепромыслового оборудования
за авторством: Смирнов Г. В. Геннадий Васильевич
Опубліковано: (2016)

Влияние конфигурации электродной системы коаксиального магнитоплазменного ускорителя на процесс формирования и развития дугового разряда
Опубліковано: (2023)

Integrated model of channels of power supplies of a stationary plasma engine
за авторством: Mihajlov M. V.
Опубліковано: (2006)

Low-energy high-current plasma immersion implantation of nitrogen ions in plasma of non-self-sustained arc discharge with thermionic and hollow cathodes
Опубліковано: (2018)

Computer simulation research of energy release modes in a discharge channel and its influence on the stress-strained state formation in a solid material at electro-blasting technolog
за авторством: Yudin A. S. Artem Sergeevich
Опубліковано: (2016)

Peculiarities of an Electrical Explosion of Flat Conductors in the Current Skinning Mode
Опубліковано: (2019)

Деструкция органических соединений в газовой и жидкой средах в плазме СВЧ-разряда
Опубліковано: (2015)

Nitriding of commercial pure titanium in the plasma of frequency-pulsed non-selfsustained glow discharge with a hollow cathode at low pressure
Опубліковано: (2017)

Improvement of plasma discharge performance at KTM tokamak
Опубліковано: (2024)

Study of nanosecond pulse switches for low voltage generator for diagnosis of power transformers
Опубліковано: (2014)

Spark erosion in a metal spheres bed: Experimental study of the discharge stability and energy efficiency
Опубліковано: (2018)

Intensification of the Output of Chemical Elements from Ore in Conditions Gliding Discharge
Опубліковано: (2018)

Multi-Pulse Operation of Coaxial Magnetic Plasma Accelerator for Dynamic Synthesis of Iron Oxide Powder
Опубліковано: (2019)

Synthesis of uranium-thorium oxide powders in low-temperature plasma of high frequency torch discharge
за авторством: Novoselov I. Yu. Ivan Yurievich
Опубліковано: (2022)

Optical Recording of the Surface Plasma of Cylindrical Conductors in Strong Magnetic Fields
Опубліковано: (2019)

Filamentation of Current-Carrying Plasma Shells
Опубліковано: (2020)

Small-size high-current generators for X-ray backlighting
Опубліковано: (2017)

Increase in the Acceleration Efficiency of Solids in a Hybrid Coaxial Magnetoplasma Accelerator
за авторством: Gerasimov D. Yu. Dmitry Yurievich
Опубліковано: (2018)

Study of the discharge on the ferroelectric surface in an argon low pressure
Опубліковано: (2025)

Physico-Mathematical Modeling and Experimental Study of Cracks in Concrete Obtained by Exposure to a Pulsed High Voltage Discharge
Опубліковано: (2020)

Triggered Spark Gap Switch with Gas Circulation for Repetitively Operated Multistage Marx Generator
Опубліковано: (2018)

High-power double-pulse generator for power supply to pulsed high-current accelerator
Опубліковано: (2018)

Методика выбора коммутатора для генератора низковольтных наносекундных импульсов
за авторством: Лавринович А. В. Алексей Валериевич
Опубліковано: (2013)

In-situ carbide reinforced aluminium metal matrix composites obtained in pulsed arc plasma discharge
Опубліковано: (2025)

Floating harmonic probe for diagnostic of pulsed discharges
Опубліковано: (2019)

Ignition Different Mode of Corona Discharge in Air at Atmospheric Pressure
Опубліковано: (2020)

Obtaining Superhard Coatings of Cubic Tungsten Carbide under High-speed Plasma Spraying
Опубліковано: (2020)

Synthesis of Ti21.5V40Cr38.5 alloy by abnormal glow discharge plasma
Опубліковано: (2023)

Structure and Properties of Silumin Surface after Vacuum Arc Plasma-Assisted Deposition of Coatings Irradiated by Low Energy High Current Pulsed Electron Beam
Опубліковано: (2020)

Установка для бесконтактного поиска скрытых дефектов в тонких диэлектрических пленках методом коронного разряда
за авторством: Лавринович В. А. Валерий Александрович
Опубліковано: (2016)

Electrical discharge drilling of granite with positive and negative polarity of voltage pulses
Опубліковано: (2019)

Synthesis of Mo2C-based material in DC arc discharge plasma under ambient air conditions
Опубліковано: (2024)