Ignition Characteristics of Coal-Water Slurry Containing Petrochemicals Based on Coal of Varying Degrees of Metamorphism; Energy and Fuels; Vol. 30, iss. 8
| Parent link: | Energy and Fuels Vol. 30, iss. 8.— 2016.— [P. 6808-6816] |
|---|---|
| Hovedforfatter: | |
| Corporate Authors: | , |
| Andre forfattere: | , |
| Summary: | Title screen This paper examines a coal–water slurry containing petrochemicals (CWSP) based on lignite, bituminous coal, anthracite, and typical waste—carbon residue obtained from the pyrolysis of tires. Waste motor oil is used as a liquid fuel component of the slurry. The study of CWSP ignition is performed via placing a fuel droplet on a low-inertia thermocouple junction (junction diameter is 0.1 mm; thermal inertia is less than 1 s) into the hot oxidant flow. The temperature and velocity of the oxidant flow vary in the range of 600–1200 K and 0.5–5 m/s, respectively. These ranges are typical for power plants in the large- and small-scale energy industry. The paper specifies the minimum oxidant temperatures which are sufficient for sustainable ignition, as well as the ignition delay times, the times for complete burnout of CWSP droplets (radii of 0.5–2 mm), and the maximum temperatures in the fuel combustion area. We discuss how the oxidant temperature and the component composition of CWSP influence the parameters listed above. Addition of a small amount of coal (with high content of volatiles) in a fuel composition can decrease the ignition temperature of CWSP based on bituminous coal and even anthracite by 50–150 K compared to that which is a traditional one for the energy sector. At the same time, the presence of coal of a high degree of metamorphism in CWSP leads to a substantial increase in the temperature in the fuel combustion zone, as well as in the duration of this process (as a result, more heat is released). The paper indicates the compositions which are characterized by minimum ignition lag, low temperature of ignition, and relatively high temperatures of combustion. Режим доступа: по договору с организацией-держателем ресурса |
| Sprog: | engelsk |
| Udgivet: |
2016
|
| Fag: | |
| Online adgang: | http://dx.doi.org/10.1021/acs.energyfuels.6b01016 |
| Format: | MixedMaterials Electronisk Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=654654 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 654654 | ||
| 005 | 20250312160125.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\20295 | ||
| 090 | |a 654654 | ||
| 100 | |a 20170511d2016 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Ignition Characteristics of Coal-Water Slurry Containing Petrochemicals Based on Coal of Varying Degrees of Metamorphism |f K. Yu. Vershinina, G. V. Kuznetsov, P. A. Strizhak | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 330 | |a This paper examines a coal–water slurry containing petrochemicals (CWSP) based on lignite, bituminous coal, anthracite, and typical waste—carbon residue obtained from the pyrolysis of tires. Waste motor oil is used as a liquid fuel component of the slurry. The study of CWSP ignition is performed via placing a fuel droplet on a low-inertia thermocouple junction (junction diameter is 0.1 mm; thermal inertia is less than 1 s) into the hot oxidant flow. The temperature and velocity of the oxidant flow vary in the range of 600–1200 K and 0.5–5 m/s, respectively. These ranges are typical for power plants in the large- and small-scale energy industry. The paper specifies the minimum oxidant temperatures which are sufficient for sustainable ignition, as well as the ignition delay times, the times for complete burnout of CWSP droplets (radii of 0.5–2 mm), and the maximum temperatures in the fuel combustion area. We discuss how the oxidant temperature and the component composition of CWSP influence the parameters listed above. Addition of a small amount of coal (with high content of volatiles) in a fuel composition can decrease the ignition temperature of CWSP based on bituminous coal and even anthracite by 50–150 K compared to that which is a traditional one for the energy sector. At the same time, the presence of coal of a high degree of metamorphism in CWSP leads to a substantial increase in the temperature in the fuel combustion zone, as well as in the duration of this process (as a result, more heat is released). The paper indicates the compositions which are characterized by minimum ignition lag, low temperature of ignition, and relatively high temperatures of combustion. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | |t Energy and Fuels | ||
| 463 | |t Vol. 30, iss. 8 |v [P. 6808-6816] |d 2016 | ||
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a водоугольное топливо | |
| 610 | 1 | |a суспензии | |
| 610 | 1 | |a нефтехимические продукты | |
| 700 | 1 | |a Vershinina |b K. Yu. |c specialist in the field of heat and power engineering |c Associate Professor of Tomsk Polytechnic University, Candidate of Physical and Mathematical Sciences |f 1992- |g Kseniya Yurievna |3 (RuTPU)RU\TPU\pers\33706 |9 17337 | |
| 701 | 1 | |a Kuznetsov |b G. V. |c Specialist in the field of heat power energy |c Professor of Tomsk Polytechnic University, Doctor of Physical and Mathematical Sciences |f 1949- |g Geny Vladimirovich |3 (RuTPU)RU\TPU\pers\31891 |9 15963 | |
| 701 | 1 | |a Strizhak |b P. A. |c Specialist in the field of heat power energy |c Doctor of Physical and Mathematical Sciences (DSc), Professor of Tomsk Polytechnic University (TPU) |f 1985- |g Pavel Alexandrovich |3 (RuTPU)RU\TPU\pers\30871 |9 15117 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Энергетический институт (ЭНИН) |b Кафедра автоматизации теплоэнергетических процессов (АТП) |3 (RuTPU)RU\TPU\col\18678 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Энергетический институт (ЭНИН) |b Кафедра теоретической и промышленной теплотехники (ТПТ) |3 (RuTPU)RU\TPU\col\18679 |
| 801 | 2 | |a RU |b 63413507 |c 20170511 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1021/acs.energyfuels.6b01016 | |
| 942 | |c CF | ||