Ignition of an organic water–coal fuel droplet floating in a heated-air flow; Thermal Engineering; Vol. 64, iss. 1
| Parent link: | Thermal Engineering Vol. 64, iss. 1.— 2017.— [P. 53-60] |
|---|---|
| 企業作者: | |
| 其他作者: | , , , |
| 總結: | Title screen Ignition of an organic water–coal fuel (CWSP) droplet floating in a heated-air flow has been studied experimentally. Rank B2 brown-coal particles with a size of 100 ?m, used crankcase Total oil, water, and a plasticizer were used as the main CWSP components. A dedicated quartz-glass chamber has been designed with inlet and outlet elements made as truncated cones connected via a cylindrical ring. The cones were used to shape an oxidizer flow with a temperature of 500–830 K and a flow velocity of 0.5–5.0 m/s. A technique that uses a coordinate-positioning gear, a nichrome thread, and a cutter element has been developed for discharging CWSP droplets into the working zone of the chamber. Droplets with an initial size of 0.4 to 2.0 mm were used. Conditions have been determined for a droplet to float in the oxidizer flow long enough for the sustainable droplet burning to be initiated. Typical stages and integral ignition characteristics have been established. The integral parameters (ignition-delay times) of the examined processes have been compared to the results of experiments with CWSP droplets suspended on the junction of a quick-response thermocouple. It has been shown that floating fuel droplets ignite much quicker than the ones that sit still on the thermocouple due to rotation of an CWSP droplet in the oxidizer flow, more uniform heating of the droplet, and lack of heat drainage towards the droplet center. High-speed video recording of the peculiarities of floatation of a burning fuel droplet makes it possible to complement the existing models of water–coal fuel burning. The results can be used for a more substantiated modeling of furnace CWSP burning with the ANSYS, Fluent, and Sigma-Flow software packages. Режим доступа: по договору с организацией-держателем ресурса |
| 語言: | 英语 |
| 出版: |
2017
|
| 主題: | |
| 在線閱讀: | http://dx.doi.org/10.1134/S0040601517010098 |
| 格式: | 電子 Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=654495 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 654495 | ||
| 005 | 20250312113720.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\20091 | ||
| 090 | |a 654495 | ||
| 100 | |a 20170428d2017 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Ignition of an organic water–coal fuel droplet floating in a heated-air flow |f T. R. Valiullin [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: p. 60 (15 tit.)] | ||
| 330 | |a Ignition of an organic water–coal fuel (CWSP) droplet floating in a heated-air flow has been studied experimentally. Rank B2 brown-coal particles with a size of 100 ?m, used crankcase Total oil, water, and a plasticizer were used as the main CWSP components. A dedicated quartz-glass chamber has been designed with inlet and outlet elements made as truncated cones connected via a cylindrical ring. The cones were used to shape an oxidizer flow with a temperature of 500–830 K and a flow velocity of 0.5–5.0 m/s. A technique that uses a coordinate-positioning gear, a nichrome thread, and a cutter element has been developed for discharging CWSP droplets into the working zone of the chamber. Droplets with an initial size of 0.4 to 2.0 mm were used. Conditions have been determined for a droplet to float in the oxidizer flow long enough for the sustainable droplet burning to be initiated. Typical stages and integral ignition characteristics have been established. The integral parameters (ignition-delay times) of the examined processes have been compared to the results of experiments with CWSP droplets suspended on the junction of a quick-response thermocouple. It has been shown that floating fuel droplets ignite much quicker than the ones that sit still on the thermocouple due to rotation of an CWSP droplet in the oxidizer flow, more uniform heating of the droplet, and lack of heat drainage towards the droplet center. High-speed video recording of the peculiarities of floatation of a burning fuel droplet makes it possible to complement the existing models of water–coal fuel burning. The results can be used for a more substantiated modeling of furnace CWSP burning with the ANSYS, Fluent, and Sigma-Flow software packages. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | |t Thermal Engineering | ||
| 463 | |t Vol. 64, iss. 1 |v [P. 53-60] |d 2017 | ||
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a топливо | |
| 610 | 1 | |a суспензии | |
| 610 | 1 | |a капли | |
| 610 | 1 | |a частицы | |
| 610 | 1 | |a флотация | |
| 610 | 1 | |a зажигание | |
| 701 | 1 | |a Valiullin |b T. R. |c specialist in the field of heat and power engineering |c Assistant of the Department of Tomsk Polytechnic University, Candidate of technical sciences |f 1991- |g Timur Radisovich |3 (RuTPU)RU\TPU\pers\42019 | |
| 701 | 1 | |a Strizhak |b P. A. |c Specialist in the field of heat power energy |c Doctor of Physical and Mathematical Sciences (DSc), Professor of Tomsk Polytechnic University (TPU) |f 1985- |g Pavel Alexandrovich |3 (RuTPU)RU\TPU\pers\30871 |9 15117 | |
| 701 | 1 | |a Shevyrev |b S. A. |c specialist in the field of heat and power engineering |c researcher of Tomsk Polytechnic University, candidate of technical sciences |f 1987- |g Sergey Aleksandrovich |3 (RuTPU)RU\TPU\pers\36042 | |
| 701 | 1 | |a Bogomolov |b A. R. |g Aleksandr Romanovich | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Энергетический институт (ЭНИН) |b Кафедра автоматизации теплоэнергетических процессов (АТП) |3 (RuTPU)RU\TPU\col\18678 |
| 801 | 2 | |a RU |b 63413507 |c 20181018 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1134/S0040601517010098 | |
| 942 | |c CF | ||