Influence of binding composition on the structure and properties of steel work-pieces obtained by injection moulding; IOP Conference Series: Materials Science and Engineering; Vol. 175 : Competitive Materials and Technology Processes (IC-CMTP4)
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 175 : Competitive Materials and Technology Processes (IC-CMTP4).— 2017.— [012035, 4 p.] |
|---|---|
| Autor Corporativo: | |
| Otros Autores: | , , , |
| Sumario: | Title screen The paper presents the results of the research analyzing the influence of binding composition on the structure and properties of the stainless steel samples obtained by injection moulding technique. It have been determined the tailored composition of binding, which provides sufficient feedstock viscosity, low porosity of work-pieces, etc. Three binding compositions polypropylene and paraffin wax have been studied: 1:6, 1:2, 2:1, respectively. Stearic acid has been used as a SAS (surface active substance). The results have shown that the binding compositions between 1:6 and 1:2 polypropylene and paraffin wax provides sufficient viscosity feedstock, dimensional stability during debinding and sintering, and the high density of the final product. |
| Lenguaje: | inglés |
| Publicado: |
2017
|
| Materias: | |
| Acceso en línea: | http://dx.doi.org/10.1088/1757-899X/175/1/012035 |
| Formato: | Electrónico Capítulo de libro |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=654477 |
MARC
| LEADER | 00000naa2a2200000 4500 | ||
|---|---|---|---|
| 001 | 654477 | ||
| 005 | 20250911091922.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\20073 | ||
| 090 | |a 654477 | ||
| 100 | |a 20170428d2017 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Influence of binding composition on the structure and properties of steel work-pieces obtained by injection moulding |f E. A. Darenskaya [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 12 tit.] | ||
| 330 | |a The paper presents the results of the research analyzing the influence of binding composition on the structure and properties of the stainless steel samples obtained by injection moulding technique. It have been determined the tailored composition of binding, which provides sufficient feedstock viscosity, low porosity of work-pieces, etc. Three binding compositions polypropylene and paraffin wax have been studied: 1:6, 1:2, 2:1, respectively. Stearic acid has been used as a SAS (surface active substance). The results have shown that the binding compositions between 1:6 and 1:2 polypropylene and paraffin wax provides sufficient viscosity feedstock, dimensional stability during debinding and sintering, and the high density of the final product. | ||
| 461 | 1 | |0 (RuTPU)RU\TPU\network\2008 |t IOP Conference Series: Materials Science and Engineering | |
| 463 | 1 | |t Vol. 175 : Competitive Materials and Technology Processes (IC-CMTP4) |o 4th International Conference, October 3-7, 2016, Miskolc-Lillafured, Hungary |o [proceedings] |v [012035, 4 p.] |d 2017 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a стальные детали | |
| 610 | 1 | |a литье под давлением | |
| 610 | 1 | |a нержавеющие стали | |
| 610 | 1 | |a вязкость | |
| 610 | 1 | |a сырье | |
| 610 | 1 | |a высокомолекулярные соединения | |
| 610 | 1 | |a выжигание | |
| 610 | 1 | |a спекание | |
| 701 | 1 | |a Darenskaya |b E. A. |c specialist in the field of material science |c Associate Professor of Tomsk Polytechnic University, Candidate of technical sciences |c maiden name Ivanova |f 1982- |g Elena Anatolievna |3 (RuTPU)RU\TPU\pers\33040 |9 16874 | |
| 701 | 1 | |a Vaulina |b O. Yu. |c specialist in the field of materials science |c Associate Professor of Tomsk Polytechnic University, Candidate of technical sciences |f 1978- |g Olga Yurievna |3 (RuTPU)RU\TPU\pers\36293 |9 19367 | |
| 701 | 1 | |a Myachin |b Yu. V. |c specialist in the field of material science |c assistant of the Department of Tomsk Polytechnic University |f 1976- |g Yury Vladimirovich |3 (RuTPU)RU\TPU\pers\38453 |9 20780 | |
| 701 | 1 | |a Kulkov |b S. N. |c specialist in the field of material science |c Professor of Tomsk Polytechnic University, Doctor of physical and mathematical sciences |f 1952- |g Sergey Nikolaevich |3 (RuTPU)RU\TPU\pers\31428 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Институт физики высоких технологий (ИФВТ) |b Кафедра материаловедения в машиностроении (ММС) |3 (RuTPU)RU\TPU\col\18688 |
| 801 | 2 | |a RU |b 63413507 |c 20170510 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1088/1757-899X/175/1/012035 | |
| 942 | |c CF | ||