Spherical gearing with intermediate ball elements: parameter ranges with a high contact ratio; IOP Conference Series: Materials Science and Engineering; Vol. 177 : Mechanical Engineering, Automation and Control Systems (MEACS 2016)
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 177 : Mechanical Engineering, Automation and Control Systems (MEACS 2016).— 2017.— [012065, 4 p.] |
|---|---|
| Autor principal: | |
| Autor Corporativo: | |
| Outros Autores: | |
| Resumo: | Title screen The paper presents analytical research of the geometry and kinematical parameters of spherical gearing with ball intermediate elements. The main attention is paid to the influence of the offset coefficient on the tooth geometry generation, the contact ratio and the motion transmission angle. Intermediate ball element racetracks on the gear are trochoidal curves on a spherical surface. Two areas for the offset coefficient values providing a high value of the contact ratio – basic trochoid (without offset) and prolate trochoid with abutting racetracks of adjacent ball elements - were revealed. Analysis of the investigated parameters showed that for power transmission, it is preferable to use spherical gearing without an offset, and for kinematic transmission, it is possible to use profiles with a large offset. The present study allows making a rational choice of geometrical parameters depending on the transmission predestination. |
| Idioma: | inglês |
| Publicado em: |
2017
|
| Colecção: | Numerical simulation of applied problems |
| Assuntos: | |
| Acesso em linha: | http://dx.doi.org/10.1088/1757-899X/177/1/012065 http://earchive.tpu.ru/handle/11683/37857 |
| Formato: | Recurso Electrónico Capítulo de Livro |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=654059 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 654059 | ||
| 005 | 20240131143151.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\19574 | ||
| 035 | |a RU\TPU\network\19572 | ||
| 090 | |a 654059 | ||
| 100 | |a 20170407a2017 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 105 | |a y z 100zy | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Spherical gearing with intermediate ball elements: parameter ranges with a high contact ratio |f M. V. Gorbenko, T. I. Gorbenko | |
| 203 | |a Text |c electronic | ||
| 225 | 1 | |a Numerical simulation of applied problems | |
| 300 | |a Title screen | ||
| 320 | |a [References: 8 tit.] | ||
| 330 | |a The paper presents analytical research of the geometry and kinematical parameters of spherical gearing with ball intermediate elements. The main attention is paid to the influence of the offset coefficient on the tooth geometry generation, the contact ratio and the motion transmission angle. Intermediate ball element racetracks on the gear are trochoidal curves on a spherical surface. Two areas for the offset coefficient values providing a high value of the contact ratio – basic trochoid (without offset) and prolate trochoid with abutting racetracks of adjacent ball elements - were revealed. Analysis of the investigated parameters showed that for power transmission, it is preferable to use spherical gearing without an offset, and for kinematic transmission, it is possible to use profiles with a large offset. The present study allows making a rational choice of geometrical parameters depending on the transmission predestination. | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\2008 |t IOP Conference Series: Materials Science and Engineering | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\19514 |t Vol. 177 : Mechanical Engineering, Automation and Control Systems (MEACS 2016) |o International Conference, October 27–29, 2016, Tomsk, Russia |o [proceedings] |f National Research Tomsk Polytechnic University (TPU) ; eds. A. P. Zykova ; N. V. Martyushev |v [012065, 4 p.] |d 2017 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a передача | |
| 610 | 1 | |a шариковые передачи | |
| 610 | 1 | |a кинематические параметры | |
| 610 | 1 | |a аналитические исследования | |
| 610 | 1 | |a геометрия | |
| 610 | 1 | |a смещения | |
| 610 | 1 | |a контакты | |
| 700 | 1 | |a Gorbenko |b M. V. |c specialist in the field of mechanical engineering |c Associate Professor of Tomsk Polytechnic University, Candidate of technical sciences |f 1959- |g Mikhail Vladimirovich |3 (RuTPU)RU\TPU\pers\32816 |9 16673 | |
| 701 | 1 | |a Gorbenko |b T. I. |c physicist |c Associate Professor of Tomsk Polytechnic University, Candidate of physical and mathematical sciences |f 1960- |g Tatiana Ivanovna |3 (RuTPU)RU\TPU\pers\38019 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Институт физики высоких технологий (ИФВТ) |b Кафедра теоретической и прикладной механики (ТПМ) |3 (RuTPU)RU\TPU\col\18695 |
| 801 | 2 | |a RU |b 63413507 |c 20170411 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1088/1757-899X/177/1/012065 | |
| 856 | 4 | |u http://earchive.tpu.ru/handle/11683/37857 | |
| 942 | |c CF | ||