Research of thermal deformation of a kinematic wave reducerwith a modified tooth profile during the work in low temperature conditions; IOP Conference Series: Materials Science and Engineering; Vol. 177 : Mechanical Engineering, Automation and Control Systems (MEACS 2016)

Bibliographic Details
Parent link:	IOP Conference Series: Materials Science and Engineering Vol. 177 : Mechanical Engineering, Automation and Control Systems (MEACS 2016).— 2017.— [012032, 4 p.]
Main Author:	Stepanova D. L.
Corporate Author:	Национальный исследовательский Томский политехнический университет (ТПУ)
Other Authors:	Nikulin P. A.
Summary:	Title screen In the conditions of the Extreme North working resource of mechanicaltools and machineelements is reduced because of bad weather conditions in this region. At a low temperature materials are exposed to deformation which is capable to break operability of the mechanism. In connection with the high requirements to the accuracy of a kinematic wave reducer, it is necessary to conduct a research for the purpose of comparison of value of thermal deformation and the appointed admission on a reducer detail. If value of thermal deformation is more admission, then it can lead to jamming of the mechanism. The research was conducted for a collected reducer and separately for not loaded driver gear.
Language:	English
Published:	2017
Series:	Information technologies in Mechanical Engineering
Subjects:	электронный ресурс труды учёных ТПУ термические деформации волны низкие температуры инструменты элементы работоспособность тепловые деформации допуски редукторы приводные механизмы
Online Access:	http://dx.doi.org/10.1088/1757-899X/177/1/012032 http://earchive.tpu.ru/handle/11683/37845
Format:	Electronic Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=654032

Similar Items

Research of thermal deformation of a kinematic wave reducerwith a modified tooth profile during the work in low temperature conditions; Молодежь и современные информационные технологии; Т. 2
by: Stepanova D. L.
Published: (2016)

Research of the load distribution in the wave kinematic reducer with a modified tooth profile and dependence of the load abilities in proportion to its gear ratio and overall dimensions; Journal of Physics: Conference Series; Vol. 803 : Information Technologies in Business and Industry (ITBI2016)
by: Stepanova D. L.
Published: (2017)

Segmentation Effect on Inhomogeneity of [110]-Single Crystal Deformation; IOP Conference Series: Materials Science and Engineering; Vol. 142 : Innovative Technologies in Engineering
by: Lychagin D. V. Dmitry Vasilievich
Published: (2016)

Formation of deformation substructures in FCC crystals under the influence of point defect fluxes; IOP Conference Series: Materials Science and Engineering; Vol. 124 : Mechanical Engineering, Automation and Control Systems (MEACS2015)
by: Matveev M. V.
Published: (2016)

Feasibility of the Davidenkov method for investigation of hoop residual stresses in cold expanded cylinders; IOP Conference Series: Materials Science and Engineering; Vol. 177 : Mechanical Engineering, Automation and Control Systems (MEACS 2016)
Published: (2017)

Thread connection simulation and experimental analysis of strain wave energy loss; Mechanical Engineering, Automation and Control Systems (MEACS)
by: Shadrina A. V. Anastasiya Viktorovna
Published: (2014)

Evolution of the deformation profile of a horizontal thin ethanol layer when heated locally; MATEC Web of Conferences; Vol. 92 : Thermophysical Basis of Energy Technologies (TBET-2016)
by: Spesivtsev S. Serafim
Published: (2017)

The formation of a quasi-periodic surface profile by means of dislocation slip; Journal of Physics: Conference Series; Vol. 803 : Information Technologies in Business and Industry (ITBI2016)
by: Alferova (Alfyorova) E. A. Ekaterina Aleksandrovna
Published: (2017)

Numerical Modeling of Deformation Processes in Rock Pillars; Applied Mechanics and Materials; Vol. 682 : Innovation Technology and Economics in Engineering
by: Aksenov V. V. Vladimir Valerievich
Published: (2014)

Influence of Lateral Incision on Inhomogeneous Deformation of a Nickel [001] - Single Cristal at Axial Compression; IOP Conference Series: Materials Science and Engineering; Vol. 125 : Materials Treatment: Current Problems and Solutions
Published: (2016)

Nanoscale localization of plastic deformation in steel with a bainitic structure; Russian Metallurgy (Metally); Vol. 2017, iss. 4
Published: (2017)

Numerical simulation of deformation and fracture in a coatedmaterial using curvilinear regular meshes; IOP Conference Series: Materials Science and Engineering; Vol. 71: International Scientific Conference of Young Scientists: Advanced Materials in Construction and Engineering 15-17 October 2014, Tomsk, Russia
Published: (2015)

Multilevel Model for Description of Material Deformation under Structural Superplasticity Conditions: Modified Kinetic Equations; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
by: Sharifullina E. R.
Published: (2018)

Comparative Analysis of Inelastic Strain Recovery and Plastic Deformation in a Ti[49.1]Ni[50.9] (at %) Alloy under Torsion and Bending; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Published: (2015)

Model of Nanostructuring Burnishing by a Spherical Indenter Taking into Consideration Plastic Deformations; Technical Physics; Vol. 63, iss. 1
by: Lyashenko Ya. A. Yakov Aleksandrovich
Published: (2019)

Deformation and Damage Accumulation in a Ceramic Composite under Dynamic Loading; IOP Conference Series: Materials Science and Engineering; Vol. 112 : Fundamental Aspects of Rare-earth Elements Mining and Separation and Modern Materials Engineering (REES-2015)
Published: (2016)

Analyzing Deformation and Fracture of Dielectrics by Integral Characteristics of their Electromagnetic Emission; Key Engineering Materials; Vol. 683 : Multifunctional Materials: Development and Application
Published: (2016)

Thermoelectric Method of Plastic Deformation Detection; Materials Science Forum; Vol. 938 : Materials and Technologies in Mechanical Engineering
Published: (2018)

The Effect of Plastic Deformation on the Geometric Parameters of Nb-Ti-Based Superconducting Cable; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
by: Yntymakova A.
Published: (2020)

Radial deformations of working cylinder of hydraulic Legs depending on their extension; IOP Conference Series: Materials Science and Engineering; Vol. 91: VI International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, Yurga, Russia, 21-23 May 2015
by: Buyalich G. D. Gennadiy Daniilovich
Published: (2015)

Deformation stages of technical aluminum at reverse; IOP Conference Series: Materials Science and Engineering; Vol. 116 : Advanced Materials and New Technologies in Modern Materials Science
by: Vaulina O. Yu. Olga Yurievna
Published: (2016)

Deformation and Fracture of Hypereutectic Silumin Samples with a Surface Modified with an Intense Pulsed Electron Beam; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Published: (2019)

Ultrasound Velocity Measurements in High-Chromium Steel Under Plastic Deformation; IOP Conference Series: Materials Science and Engineering; Vol. 125 : Materials Treatment: Current Problems and Solutions
Published: (2016)

Cutting Edge Geometry Effect on Plastic Deformation of Titanium Alloy; IOP Conference Series: Materials Science and Engineering; Vol. 125 : Materials Treatment: Current Problems and Solutions
Published: (2016)

Numerical Study of Deformation and Fracture of Ceramics Nanocomposite with Different Structural Parameters under Mechanical Loading; Key Engineering Materials; Vol. 683 : Multifunctional Materials: Development and Application
by: Konovalenko I. S. Igor Sergeevich
Published: (2016)

A Tooth upon Our Peace
by: Emily E. D.
Published: (Санкт-Петербург, Лань, 2013)

A Micromechanical Model for the Deformation Behavior of Titanium Polycrystals; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Published: (2015)

Effect of thermomechanical impacts on the deformation of thin polyimide films at uniaxial tension; IOP Conference Series: Materials Science and Engineering; Vol. 754 : High Technology: Research and Applications (HTRA-2019)
Published: (2020)

Two-Phase Model of the Polycrystalline Aggregate with Account for Grain-Boundary States under Quasi-Static Deformation; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
by: Reshetnyak А. А. Aleksandr Aleksandrovich
Published: (2018)

Study of the influence of the electron irradiation dose on the deformation of Mylar films taking into account the processes of destruction and crosslinking; IOP Conference Series: Materials Science and Engineering; Vol. 510 : High Technology: Research and Applications (HTRA-2018)
Published: (2019)

Computational Mesomechanics of Surface-Modified Titanium; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Published: (2016)

Plastic Deformation Nucleation in Elastically Loaded CuNi Alloy during Nanoindentation; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Published: (2016)

Research on the processes of deformation and failure in coarse- and ultrafine-grain states of Zr1–Nb alloys by digital image correlation and infrared thermography; Materials Science and Engineering: A; Vol. 784
Published: (2020)

Deformation in the RBMK graphite stacks; Интеллектуальные энергосистемы; Т. 3
by: Nechupey I. A.
Published: (2016)

Nanostructuring of a Surface Layer as a Way to Improve the Mechanical Properties of Hypoeutectic Silumin; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
Published: (2020)

A Computational Study of the Dynamic Deformation and Fracture in a Coated Material; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Published: (2016)

Simulation of Transcendental Deformation Mode of Interchamber Pillars and Ore Deposit in the Course of Development of Bauxite Resources at Great Depth on the Example of Mine "Sevuralboksitruda"; IOP Conference Series: Materials Science and Engineering; Vol. 582 : Innovative Technologies in Engineering
by: Kosukhin N. I.
Published: (2019)

Методы предупреждения и устранения сварочных деформаций судовых корпусных конструкций учебное пособие
by: Морозов В. Н.
Published: (Калининград, КГТУ, 2015)

Реологические свойства металла с фазовым превращением и прогнозированием его микроструктуры; Проблемы прочности; № 3
by: Ширакаши Т.
Published: (2002)

Automatic selection of a subset size at vector fields construction; IOP Conference Series: Materials Science and Engineering; Vol. 93: Modern Technique and Technologies (MTT'2015)
Published: (2015)