Numerical simulation of discharge plasma generation and nitriding the metals and alloys; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)

Numerical simulation of discharge plasma generation and nitriding the metals and alloys; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)

Dades bibliogràfiques
Parent link:	IOP Conference Series: Materials Science and Engineering Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016).— 2017.— [012044, 6 p.]
Autor corporatiu:	Национальный исследовательский Томский политехнический университет (ТПУ) Институт кибернетики (ИК)
Altres autors:	Koval T. V. Tamara Vasilievna, Manakov R. A., Nguyen Bao Khyng, Tran My Kim An
Sumari:	Title screen This research provides the numerical simulation of the plasma generation in a hollow cathode as well as the diffusion of nitrogen atoms into the metal in the low-pressure glow discharge plasma. The characteristics of the gas discharge were obtained and the relation of the basic technological parameters and the structural and phase state of the nitrided material were defined. Authors provided the comparison of calculations with the experimental results of titanium nitriding by low-pressure glow discharge plasma in a hollow cathode.
Idioma:	anglès
Publicat:	2017
Col·lecció:	Physical and chemical phenomena in inorganic materials in radiation, electrical and thermal fields
Matèries:	электронный ресурс труды учёных ТПУ численное моделирование генерация плазма азотирование металлы сплавы
Accés en línia:	http://dx.doi.org/10.1088/1757-899X/168/1/012044 http://earchive.tpu.ru/handle/11683/37758
Format:	xMaterials Electrònic Capítol de llibre
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=653819

Ítems similars

Mathematical Modeling of Discharge Plasma Generation and Diffusion Saturation of Metals and Alloys; Advances in Computer Science Research; Vol. 51 : Information Technologies in Science, Management, Social Sphere and Medicine (ITSMSSM 2016)
per: Nguyen Bao Khyng
Publicat: (2016)

Surface nitriding and alloying of steels with Ti and Nb atoms by compression plasma flows treatment; Vacuum; Vol. 129
Publicat: (2016)

Nitriding of commercial pure titanium in the plasma of frequency-pulsed non-selfsustained glow discharge with a hollow cathode at low pressure; High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes; Vol. 21, iss. 1
Publicat: (2017)

Modelling of the diffusion saturation of metals and alloys in the glow discharge plasma inside a hollow cathode; Energy Fluxes and Radiation Effects (EFRE-2016)
per: Bao Hung Nguyen
Publicat: (2016)

Phase Composition of Perlite Steel Modified by Electrolyte Plasma Nitriding; AIP Conference Proceedings; Vol. 1899 : Prospects of Fundamental Sciences Development (PFSD-2017)
Publicat: (2017)

Destruction of humic substances by pulsed electrical discharge; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publicat: (2017)

Modelling of chemical reactions in plasma; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
per: Aktaev N. E. Nurken Erbolatovich
Publicat: (2017)

Numerical study of the generation of runaway electrons in a gas diode with a hot channel; Physics of Plasmas; Vol. 22
per: Lisenkov V. V. Vasily Viktorovich
Publicat: (2015)

Influence of Ion Nitriding Regime on Mechanical Properties and Fracture Mechanism of Austenitic Steel Subjected to Different Thermomechanical Treatments; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Publicat: (2016)

Duplex Treatment of AISI 420 Steel by RF-ICP Nitriding and CrAlN Coating Deposition: The Role of Nitriding Duration; Coatings; Vol. 12, iss. 11
per: Sidelev D. V. Dmitry Vladimirovich
Publicat: (2022)

The Mathematical Model of Image, Generated by Scanning Digital Radiography System; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
per: Udod V. A. Viktor Anatolievich
Publicat: (2017)

High-intensity pulsed ion beam generation in plasma erosion mode; Gas Discharge Plasmas and Their Applications (GDP 2019)
per: Pushkarev A. I. Aleksandr Ivanovich
Publicat: (2019)

Automated test bench for simulation of radiation electrification of spacecraft structural dielectrics; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publicat: (2017)

Generation of Gas Discharge Plasma by an Arc Source with a Cold Hollow Cathode; Instruments and Experimental Techniques; Vol. 48, № 3
per: Schanin P. M.
Publicat: (2005)

The ion beam generation in the self-magnetically insulated ion diode; Gas Discharge Plasmas and Their Applications (GDP 2019)
per: Stepanov A. V. Andrey Vladimirovich
Publicat: (2019)

Complex defects in crystal scintillation materials and phosphors; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
per: Lisitsyn V. M. Viktor Mikhailovich
Publicat: (2017)

Effect of Thermal Exposure on Structure of the Ultrafine-GrainedZr-1Nb Alloy; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publicat: (2017)

Внутреннее окисление и азотирование сплавов
per: Кипарисов С. С. Сергей Сергеевич
Publicat: (Москва, Металлургия, 1979)

Effect of irradiation and thermal annealing on quartz materials luminescence; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
per: Korovkin M. V. Mikhail Vladimirovich
Publicat: (2017)

Modeling of radiative - conductive heat transfer in compositing materials; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publicat: (2017)

Generation of Shock-Wave Disturbances at Plasma-Vapor Bubble Oscillation; Journal of Physics: Conference Series; Vol. 652 : Gas Discharge Plasmas and Their Applications (GDP 2015)
per: Kuznetsova N. S. Nataliya Sergeevna
Publicat: (2015)

Азотирование стали
per: Лахтин Ю. М. Юрий Михайлович
Publicat: (Москва, Машиностроение, 1976)

Electron-ion-plasma modification of the structure and properties of commercial steels; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publicat: (2017)

Combined surface modification of commercial aluminum; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publicat: (2017)

Thermal stability of brushite with chitosan samples; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publicat: (2017)

Control System of Parameters of the Azimuthal Module; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publicat: (2017)

Investigation of Magnetically Insulated Diode for Intense Pulsed Ion Beam Generation for Materials Research; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publicat: (2019)

Combustion Synthesis of Sialon and Nitride Phases Based on Ferrosilicoaluminum with Marshalite Additives; Refractories and Industrial Ceramics; Vol. 61, iss. 6
Publicat: (2021)

Thermodynamic models of radiation-induced processes in solids; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publicat: (2017)

Diffusion mass transfer in ionic materials under intense electron irradiation; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publicat: (2017)

Влияние электрического потенциала смещения на свойства стали 40Х13 при ионно-плазменном азотировании в высокочастотном разряде; Современные проблемы машиностроения
per: Сиделёв Д. В. Дмитрий Владимирович
Publicat: (2021)

Research of nanocomposite structure of boron nitride at proton radiation; IOP Conference Series: Materials Science and Engineering; Vol. 110 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2015)
Publicat: (2016)

Pneumatic device of the preload and dynamic loads balancing to reduce the intensity of thermal processes in the metal cutting process; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publicat: (2017)

Nitrided Silicon-Carbon Coatings Structure and Properties; Вестник Карагандинского университета. Серия Физика; № 2 (98)
Publicat: (2020)

Effect of ion irradiation on the surface energy of deposited coatings; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publicat: (2017)

Thermal effects of carbonated hydroxyapatite modified by glycine and albumin; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
per: Gerk S. A.
Publicat: (2017)

Impact of nanosecond proton beam processing on nanoblocks of copper; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publicat: (2017)

Термогазоциклирование как способ интенсификации процессов азотирования; Наукоемкие технологии; № 11
per: Белашова И. С.
Publicat: (2004)

Азотирование и карбонитрирование: пер. с нем.
Publicat: (Москва, Металлургия, 1990)

Properties of rhombohedral pyrolytic boron nitride; Inorganic Materials; Vol. 32, № 6
Publicat: (1996)