Tensile Strength on Friction Stir Processed AMg5 (5083) Aluminum Alloy; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
| Parent link: | AIP Conference Proceedings Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016.— 2016.— [020027, 4 p.] |
|---|---|
| Autor corporatiu: | , |
| Altres autors: | , , , , |
| Sumari: | Title screen The results of the tensile tests carried out both on AMg5 (5083) aluminum alloy samples base and those obtained using friction stir processing technique are reported. The tensile test samples have been prepared from the friction stir processed plates so that their tensile axis was parallel to the processing direction. The maximum tensile strength of the processed samples was 9% higher than of the base metal. The fractographic examination shows the presence of flat areas inherent of the brittle fracture in all three friction processed samples. The load-extension curves show that friction stir processing may suppress the serrated yielding. Режим доступа: по договору с организацией-держателем ресурса |
| Idioma: | anglès |
| Publicat: |
2016
|
| Matèries: | |
| Accés en línia: | http://dx.doi.org/10.1063/1.4966320 |
| Format: | Electrònic Capítol de llibre |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=652608 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 652608 | ||
| 005 | 20231102025858.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\17937 | ||
| 035 | |a RU\TPU\network\17933 | ||
| 090 | |a 652608 | ||
| 100 | |a 20170119a2016 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 105 | |a y z 100zy | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Tensile Strength on Friction Stir Processed AMg5 (5083) Aluminum Alloy |f A. V. Chumaevsky [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 22 tit.] | ||
| 330 | |a The results of the tensile tests carried out both on AMg5 (5083) aluminum alloy samples base and those obtained using friction stir processing technique are reported. The tensile test samples have been prepared from the friction stir processed plates so that their tensile axis was parallel to the processing direction. The maximum tensile strength of the processed samples was 9% higher than of the base metal. The fractographic examination shows the presence of flat areas inherent of the brittle fracture in all three friction processed samples. The load-extension curves show that friction stir processing may suppress the serrated yielding. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\4816 |t AIP Conference Proceedings | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\17851 |t Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016 |o Proceedings of the International conference, 19–23 September 2016, Tomsk, Russia |f National Research Tomsk Polytechnic University (TPU); eds. V. E. Panin ; S. G. Psakhie ; V. M. Fomin |v [020027, 4 p.] |d 2016 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a прочность | |
| 610 | 1 | |a растяжения | |
| 610 | 1 | |a алюминиевые сплавы | |
| 610 | 1 | |a трение с перемешиванием | |
| 610 | 1 | |a пластины | |
| 701 | 1 | |a Chumaevsky |b A. V. | |
| 701 | 1 | |a Eliseev |b A. A. | |
| 701 | 1 | |a Filippov |b A. V. |c specialist in the field of mechanical engineering |c assistant of Yurga technological Institute of Tomsk Polytechnic University |f 1988- |g Andrey Vladimirovich |2 stltpush |3 (RuTPU)RU\TPU\pers\34612 |9 17974 | |
| 701 | 1 | |a Rubtsov |b V. E. |c physicist |c engineer of Tomsk Polytechnic University, candidate of physical and mathematical sciences |f 1970- |g Valery Evgenjevich |2 stltpush |3 (RuTPU)RU\TPU\pers\34118 | |
| 701 | 1 | |a Tarasov |b S. Yu. |c specialist in the field of mechanical engineering |c Professor of Tomsk Polytechnic University, Doctor of technical sciences |f 1959- |g Sergei Yulievich |2 stltpush |3 (RuTPU)RU\TPU\pers\31400 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Институт физики высоких технологий (ИФВТ) |b Кафедра физики высоких технологий в машиностроении (ФВТМ) |h 2087 |2 stltpush |3 (RuTPU)RU\TPU\col\18687 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Юргинский технологический институт (филиал) (ЮТИ) |b Кафедра технологии машиностроения (ТМС) |h 356 |2 stltpush |3 (RuTPU)RU\TPU\col\18902 |
| 801 | 2 | |a RU |b 63413507 |c 20170120 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1063/1.4966320 | |
| 942 | |c CF | ||