Grain shape and size and structural and phase conditions modified by aluminum ion implantation in UFG titanium; AIP Conference Proceedings; Vol. 1772 : Prospects of Fundamental Sciences Development (PFSD-2016)

Dettagli Bibliografici
Parent link:AIP Conference Proceedings
Vol. 1772 : Prospects of Fundamental Sciences Development (PFSD-2016).— 2016.— [030007, 7 p.]
Ente Autore: Национальный исследовательский Томский политехнический университет
Altri autori: Nikonenko A. Alisa, Popova N. Natalya, Nikonenko E. L. Elena Leonidovna, Kalashnikov M. P. Mark Petrovich, Kurzina I. Irina
Riassunto:Title screen
The paper presents the transmission electron microscopy investigations of the granular state and the structural and phase conditions of commercially pure ultra-fine grain (UFG) titanium VT1-0 alloyed with aluminum ions. The UFG-titanium is obtained by the multiple uniaxial compaction with intermediate annealing. The ion implantation is carried out on Mevva-V.Ru ion source at ion-implantation dosages of 1·10{17}, 5·10{17} and 1·10{18} ion/cm{2}. The functions are constructed for the grain size distribution in longitudinal and cross sections; the average grain size and the grain anisotropy factor are determined in this paper. It is shown that the grain shape and size of titanium specimens are modified due to the ion implantation. With the increase of the ion-implantation dosage the anisotropy factor decreases three times. At 1·10{18} ion/cm{2} ion-implantation dosage the longitudinal grain size comes to 0.7 [mu]m. The phase composition of the alloy is detected after the ion implantation and its modification induced by the implantation dosage. The quantitative characteristics and locations of secondary [beta]-Ti, TiAl[3], Ti[3] Al, TiC and TiO[2] phases are ascertained during the investigations. It is shown that TiAl[3] and Ti[3] Al are ordered phases formed during the ion implantation on [alpha]-Ti grain boundaries. The volume ratios of these phases are detected and determined by the ion-implantation dosage. The volume ratios of [alpha]-Ti and secondary TiC and TiO[2] phases do not depend on the implantation dosage and range between 0.3-0.9 vol.%.
Режим доступа: по договору с организацией-держателем ресурса
Lingua:inglese
Pubblicazione: 2016
Serie:Materials structure and properties under modification
Soggetti:
Accesso online:http://dx.doi.org/10.1063/1.4964545
http://earchive.tpu.ru/handle/11683/34993
Natura: MixedMaterials Elettronico Capitolo di libro
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=652099