Textural Characteristics of Products Obtained by Electrochemical Oxidation of Copper and Cadmium Using Alternating Current; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
| Parent link: | Key Engineering Materials: Scientific Journal Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016).— 2016.— [P. 112-116] |
|---|---|
| Kurumsal yazarlar: | , |
| Diğer Yazarlar: | , , , , , |
| Özet: | Title screen The porous structures of nanoparticles of copper and cadmium prepared by AC electrochemical synthesis in solutions of acetate of sodium, chlorides of ammonium and sodium were studied. It is established that at current density of 1A/cm{2} and concentration of NaCl 3 % wt. with the highest specific surface area (8.23m{2}/g), maximum pore volume (0.029 cm{3}/g) are formed, and the largest volume of the particles is characteristic of the nominal pore diameter - 62 nm. The values of specific surface area and total pore volume with increase in the temperature of calcination decrease, and the pores are slightly enlarged in diameter. Thus, the obtained data allow predicting operating parameters of the electrolysis to obtain copper - cadmium oxide system a predetermined porous structure. Режим доступа: по договору с организацией-держателем ресурса |
| Dil: | İngilizce |
| Baskı/Yayın Bilgisi: |
2016
|
| Seri Bilgileri: | Electrophysical and Electrochemical Methods and Technologies of Materials Treatment |
| Konular: | |
| Online Erişim: | http://dx.doi.org/10.4028/www.scientific.net/KEM.712.112 |
| Materyal Türü: | Elektronik Kitap Bölümü |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=651269 |
| Özet: | Title screen The porous structures of nanoparticles of copper and cadmium prepared by AC electrochemical synthesis in solutions of acetate of sodium, chlorides of ammonium and sodium were studied. It is established that at current density of 1A/cm{2} and concentration of NaCl 3 % wt. with the highest specific surface area (8.23m{2}/g), maximum pore volume (0.029 cm{3}/g) are formed, and the largest volume of the particles is characteristic of the nominal pore diameter - 62 nm. The values of specific surface area and total pore volume with increase in the temperature of calcination decrease, and the pores are slightly enlarged in diameter. Thus, the obtained data allow predicting operating parameters of the electrolysis to obtain copper - cadmium oxide system a predetermined porous structure. Режим доступа: по договору с организацией-держателем ресурса |
|---|---|
| DOI: | 10.4028/www.scientific.net/KEM.712.112 |