Optical Absorption Peculiarities of Al-Si-N Coatings Produced by Magnetron Sputtering; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
| Parent link: | Key Engineering Materials: Scientific Journal Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016).— 2016.— [P. 3-8] |
|---|---|
| Enti autori: | Национальный исследовательский Томский политехнический университет (ТПУ) Энергетический институт (ЭНИН) Кафедра электроснабжения промышленных предприятий (ЭПП), Национальный исследовательский Томский политехнический университет (ТПУ) Институт физики высоких технологий (ИФВТ) Лаборатория № 1 |
| Altri autori: | Kabyshev A. V. Alexander Vasilievich, Konusov F. V. Fedor Valerievich, Lauk A. L. Aleksandr Lukyanovich, Lebedinsky A. M. Aleksey Mikhaylovich, Legostaev V. N. Victor, Smolyanskiy (Smolyansky, Smolyanskii) E. A. Egor Aleksandrovich |
| Riassunto: | Title screen In this paper the optical absorption characteristics of Al–Si–N coatings, deposited by magnetron sputtering on the substrates from silicon single crystals and glass were studied. The influence of conditions deposition on optical properties has been determined. The characteristics of interband and exponential absorption are determined by influence of localized states (LS) of defects continuously distributed in the band gap (BG) and reflect the influence on properties of crystalline and amorphous components material of coatings. The interband absorption is realized via the allowed indirect transitions through the optical gap 2.7–2.8 eV and direct transitions through the gap 3.8–3.96 eV. The interrelations between the parameters of interband and exponential absorption are typical for the naterials, whose properties are determined by a static and/or dynamic disordering of the crystal lattice by the defects of a different nature. Maximal average value of the BG width is 4.8–5.1 eV in the scope of semiclassical analysis applied to amorphous and strongly defective materials. The optical parameters of deposited coatings are changed in correlation with a changing of the mechanical characteristics in dependency on the nitrogen pressure. Режим доступа: по договору с организацией-держателем ресурса |
| Lingua: | inglese |
| Pubblicazione: |
2016
|
| Serie: | Electrophysical and Electrochemical Methods and Technologies of Materials Treatment |
| Soggetti: | |
| Accesso online: | http://dx.doi.org/10.4028/www.scientific.net/KEM.712.3 |
| Natura: | Elettronico Capitolo di libro |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=651237 |
Documenti analoghi
Pulsed Cathodoluminescence of LiF Crystals Doped with W and Ti; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
The Influence of Plasma Composition on Mechanical Stresses in Substrate-Coating System; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Shanin S. A. Sergei Aleksandrovich
Pubblicazione: (2016)
di: Shanin S. A. Sergei Aleksandrovich
Pubblicazione: (2016)
The Features of Diffusion and Mechanical Waves Interaction at the Initial Stage of Metal Surface Treatment by Particle Beam under Nonisothermal Conditions; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Parfenova E. S. Elena Sergeevna
Pubblicazione: (2016)
di: Parfenova E. S. Elena Sergeevna
Pubblicazione: (2016)
High-rate deposition of chromium coatings by magnetron sputtering; Gas Discharge Plasmas and Their Applications (GDP 2019)
Pubblicazione: (2019)
Pubblicazione: (2019)
Tungsten Powder Sintering; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
Waterproof Magnesia Binder for Composite Materials; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
Deposition of the low resistive ITO-films by means of reactive magnetron sputtering of the In/Sn target on the cold substrate; IOP Conference Series: Materials Science and Engineering; Vol. 135 : Issues of Physics and Technology in Science, Industry and Medicine
Pubblicazione: (2016)
Pubblicazione: (2016)
Sulfur-Containing Composite Material for the Concrete Production; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
Pulsed Electron Beam Propagation in Oxygen; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
Electrical Treeing in Solid Fossil Fuels; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Martemyanov S. M. Sergey Mikhailovich
Pubblicazione: (2016)
di: Martemyanov S. M. Sergey Mikhailovich
Pubblicazione: (2016)
Multiple Rock Breakdown in Electrodischarge Technology; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
Capabilities of Laser Printers with Different Power; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
Temperature Distribution on the Surface of LED Lamps; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Lebedev S. M. Sergey Mikhailovich
Pubblicazione: (2016)
di: Lebedev S. M. Sergey Mikhailovich
Pubblicazione: (2016)
Application of Aluminum Nanopowder for Pure Hydrogen Production; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Ilyin A. P. Aleksandr Petrovich
Pubblicazione: (2016)
di: Ilyin A. P. Aleksandr Petrovich
Pubblicazione: (2016)
Thermal Hardening of the Tin Bronze Alloyed with Nickel; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Klochkov N. S. Nikolai Sergeevich
Pubblicazione: (2016)
di: Klochkov N. S. Nikolai Sergeevich
Pubblicazione: (2016)
Cathodoluminescence Properties of Commercial Phosphors for White LED; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
Synthesis and Properties of Iron-Based Magnetic Nanoparticles; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Sashko N. Nikita
Pubblicazione: (2016)
di: Sashko N. Nikita
Pubblicazione: (2016)
Parameters Investigation of Phosphors for Solid State Lighting; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
Acoustic Properties of Isotropic Hypoelastic Materials with Residual Technological Stresses; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Demidov V. N. Valery Nikolaevich
Pubblicazione: (2016)
di: Demidov V. N. Valery Nikolaevich
Pubblicazione: (2016)
Cascade Probability Method and its Relationship with Boltzmann Equations; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
Structural and Energy State of Electro-Explosive Aluminum Nanopowder; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Mostovshchikov A. V. Andrey Vladimirovich
Pubblicazione: (2016)
di: Mostovshchikov A. V. Andrey Vladimirovich
Pubblicazione: (2016)
Monitoring the Palladium Contents in the Tailings Using Stripping Voltammetry; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Ustinova E. M. Elvira Maratovna
Pubblicazione: (2016)
di: Ustinova E. M. Elvira Maratovna
Pubblicazione: (2016)
Formation of the silicon coating on the NiTi substrate by magnetron sputteringi; Gas Discharge Plasmas and Their Applications (GDP 2019)
di: Luchin A. V.
Pubblicazione: (2019)
di: Luchin A. V.
Pubblicazione: (2019)
Structure and optical-mechanical properties of the Zr-Y-O coatings deposited by pulse magnetron sputtering on optical glass; IOP Conference Series: Materials Science and Engineering; Vol. 511 : Perspective Materials of Constructional and Medical Purpose
Pubblicazione: (2019)
Pubblicazione: (2019)
Physical and Chemical Aspects of Formation of Epoxy Composite Material with Microfilling Agent; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
Determination of Platinum and Palladium in the Presence of other Metals in the Mineral Raw Materials; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Ustinova E. M. Elvira Maratovna
Pubblicazione: (2016)
di: Ustinova E. M. Elvira Maratovna
Pubblicazione: (2016)
RF-Magnetron Sputtering of Calcium Phosphates for Medical Implants: Structure and Properties; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Pubblicazione: (2019)
Pubblicazione: (2019)
Electrolytic Behavior Silver Microphases and Nanophases on the Graphite Electrode Surface; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Perevezentseva D. O. Dariya Olegovna
Pubblicazione: (2016)
di: Perevezentseva D. O. Dariya Olegovna
Pubblicazione: (2016)
Influence of Copper Nanoparticles on Tribological Properties of Nanolamellar Tungsten Disulfide; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
One-Pot Synthesis of Chloropyridines from Aminopyridines via Diazotization; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Lesina Yu. A. Yuliya Aleksandrovna
Pubblicazione: (2016)
di: Lesina Yu. A. Yuliya Aleksandrovna
Pubblicazione: (2016)
Estimation of Thermodiffusion Influence on Formation of Transition Zones during Brazing; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Chepak-Gizbrekht M. V. Mariya Vladimirovna
Pubblicazione: (2016)
di: Chepak-Gizbrekht M. V. Mariya Vladimirovna
Pubblicazione: (2016)
Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016): The Workshop , February 15-17, 2016, Tomsk, Russia; [proceedings]; Key Engineering Materials
Pubblicazione: (2016)
Pubblicazione: (2016)
Study of the SHS Addition Effect on Phase Composition of Cordierite Ceramics; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Khabas (Habas) T. A. Tamara Andreevna
Pubblicazione: (2016)
di: Khabas (Habas) T. A. Tamara Andreevna
Pubblicazione: (2016)
Technology Development of Continuous Synthesis of Active Substance for Dispenser Cathode; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Bezmaternykh A. O. Anna Olegovna
Pubblicazione: (2016)
di: Bezmaternykh A. O. Anna Olegovna
Pubblicazione: (2016)
Features of the Fine Structure of the Active Layers of Organic Solar Cells; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
Effects of Doped Oxygen on ZnWO[4] Crystal Luminescence; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
Study of Products of Metallic Titanium Electrospark Dispersion in Aqueous Medium; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
Influence of Plasma Assistance on Arc Deposited MoN Coatings; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
Improvement of Wear Resistance of UHMWPE by Adding Solid Lubricating Fillers; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)
Pubblicazione: (2016)
Solid oxide fuel cell anode surface modification by magnetron sputtering of NiO/YSZ thin film; Journal of Physics: Conference Series; Vol. 830 : Energy Fluxes and Radiation Effects 2016
Pubblicazione: (2017)
Pubblicazione: (2017)
Documenti analoghi
-
Pulsed Cathodoluminescence of LiF Crystals Doped with W and Ti; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016) -
The Influence of Plasma Composition on Mechanical Stresses in Substrate-Coating System; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Shanin S. A. Sergei Aleksandrovich
Pubblicazione: (2016) -
The Features of Diffusion and Mechanical Waves Interaction at the Initial Stage of Metal Surface Treatment by Particle Beam under Nonisothermal Conditions; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
di: Parfenova E. S. Elena Sergeevna
Pubblicazione: (2016) -
High-rate deposition of chromium coatings by magnetron sputtering; Gas Discharge Plasmas and Their Applications (GDP 2019)
Pubblicazione: (2019) -
Tungsten Powder Sintering; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)