Optical Absorption Peculiarities of Al-Si-N Coatings Produced by Magnetron Sputtering

Bibliographic Details
Parent link:Key Engineering Materials: Scientific Journal
Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016).— 2016.— [P. 3-8]
Corporate Authors: Национальный исследовательский Томский политехнический университет (ТПУ) Энергетический институт (ЭНИН) Кафедра электроснабжения промышленных предприятий (ЭПП), Национальный исследовательский Томский политехнический университет (ТПУ) Институт физики высоких технологий (ИФВТ) Лаборатория № 1
Other Authors: Kabyshev A. V. Alexander Vasilievich, Konusov F. V. Fedor Valerievich, Lauk A. L. Aleksandr Lukyanovich, Lebedinsky A. M. Aleksey Mikhaylovich, Legostaev V. N. Victor, Smolyanskiy (Smolyansky, Smolyanskii) E. A. Egor Aleksandrovich
Summary:Title screen
In this paper the optical absorption characteristics of Al–Si–N coatings, deposited by magnetron sputtering on the substrates from silicon single crystals and glass were studied. The influence of conditions deposition on optical properties has been determined. The characteristics of interband and exponential absorption are determined by influence of localized states (LS) of defects continuously distributed in the band gap (BG) and reflect the influence on properties of crystalline and amorphous components material of coatings. The interband absorption is realized via the allowed indirect transitions through the optical gap 2.7–2.8 eV and direct transitions through the gap 3.8–3.96 eV. The interrelations between the parameters of interband and exponential absorption are typical for the naterials, whose properties are determined by a static and/or dynamic disordering of the crystal lattice by the defects of a different nature. Maximal average value of the BG width is 4.8–5.1 eV in the scope of semiclassical analysis applied to amorphous and strongly defective materials. The optical parameters of deposited coatings are changed in correlation with a changing of the mechanical characteristics in dependency on the nitrogen pressure.
Режим доступа: по договору с организацией-держателем ресурса
Published: 2016
Series:Electrophysical and Electrochemical Methods and Technologies of Materials Treatment
Subjects:
Online Access:http://dx.doi.org/10.4028/www.scientific.net/KEM.712.3
Format: Electronic Book Chapter
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=651237

MARC

LEADER 00000nla2a2200000 4500
001 651237
005 20240704063105.0
035 |a (RuTPU)RU\TPU\network\16486 
035 |a RU\TPU\network\15818 
090 |a 651237 
100 |a 20161107a2016 k y0engy50 ba 
101 0 |a eng 
105 |a y z 100zy 
135 |a drgn ---uucaa 
181 0 |a i  
182 0 |a b 
200 1 |a Optical Absorption Peculiarities of Al-Si-N Coatings Produced by Magnetron Sputtering  |f A. V. Kabyshev [et al.] 
203 |a Text  |c electronic 
225 1 |a Electrophysical and Electrochemical Methods and Technologies of Materials Treatment 
300 |a Title screen 
330 |a In this paper the optical absorption characteristics of Al–Si–N coatings, deposited by magnetron sputtering on the substrates from silicon single crystals and glass were studied. The influence of conditions deposition on optical properties has been determined. The characteristics of interband and exponential absorption are determined by influence of localized states (LS) of defects continuously distributed in the band gap (BG) and reflect the influence on properties of crystalline and amorphous components material of coatings. The interband absorption is realized via the allowed indirect transitions through the optical gap 2.7–2.8 eV and direct transitions through the gap 3.8–3.96 eV. The interrelations between the parameters of interband and exponential absorption are typical for the naterials, whose properties are determined by a static and/or dynamic disordering of the crystal lattice by the defects of a different nature. Maximal average value of the BG width is 4.8–5.1 eV in the scope of semiclassical analysis applied to amorphous and strongly defective materials. The optical parameters of deposited coatings are changed in correlation with a changing of the mechanical characteristics in dependency on the nitrogen pressure. 
333 |a Режим доступа: по договору с организацией-держателем ресурса 
461 0 |0 (RuTPU)RU\TPU\network\11477  |t Key Engineering Materials  |o Scientific Journal 
463 0 |0 (RuTPU)RU\TPU\network\16425  |t Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)  |o The Workshop , February 15-17, 2016, Tomsk, Russia  |o [proceedings]  |f National Research Tomsk Polytechnic University (TPU) ; eds. G. E. Osokin [et al.]  |v [P. 3-8]  |d 2016 
610 1 |a электронный ресурс 
610 1 |a труды учёных ТПУ 
610 1 |a оптическое поглощение 
610 1 |a покрытия 
610 1 |a магнетронное распыление 
610 1 |a подложки 
610 1 |a монокристаллы 
610 1 |a дефекты 
610 1 |a оптические характеристики 
610 1 |a поглощения 
701 1 |a Kabyshev  |b A. V.  |c specialist in the field of electric power engineering  |c Professor of Tomsk Polytechnic University, Doctor of physical and mathematical sciences  |f 1958-  |g Alexander Vasilievich  |3 (RuTPU)RU\TPU\pers\32572 
701 1 |a Konusov  |b F. V.  |c physicist  |c Lead Engineer of Tomsk Polytechnic University, Candidate of physical and mathematical sciences  |f 1958-  |g Fedor Valerievich  |y Tomsk  |3 (RuTPU)RU\TPU\pers\32570  |9 16491 
701 1 |a Lauk  |b A. L.  |c Physicist  |c Leading engineer of Tomsk Polytechnic University  |f 1957-  |g Aleksandr Lukyanovich  |3 (RuTPU)RU\TPU\pers\37675 
701 1 |a Lebedinsky  |b A. M.  |c electrophysicist  |c Associate Scientist of Tomsk Polytechnic University, candidate of physico-mathematical Sciences  |f 1982-  |g Aleksey Mikhaylovich  |3 (RuTPU)RU\TPU\pers\36499 
701 1 |a Legostaev  |b V. N.  |g Victor 
701 1 |a Smolyanskiy (Smolyansky, Smolyanskii)  |b E. A.  |c Physicist  |c Research Engineer of Tomsk Polytechnic University  |f 1985-  |g Egor Aleksandrovich  |3 (RuTPU)RU\TPU\pers\37673  |9 20478 
712 0 2 |a Национальный исследовательский Томский политехнический университет (ТПУ)  |b Энергетический институт (ЭНИН)  |b Кафедра электроснабжения промышленных предприятий (ЭПП)  |3 (RuTPU)RU\TPU\col\18676 
712 0 2 |a Национальный исследовательский Томский политехнический университет (ТПУ)  |b Институт физики высоких технологий (ИФВТ)  |b Лаборатория № 1  |3 (RuTPU)RU\TPU\col\19035 
801 2 |a RU  |b 63413507  |c 20170303  |g RCR 
856 4 |u http://dx.doi.org/10.4028/www.scientific.net/KEM.712.3 
942 |c CF