Влияние предварительного легирования подложки на свойства вакуумно-дуговых нитридных покрытий; Известия вузов. Физика; Т. 59, № 7, ч.2
| Parent link: | Известия вузов. Физика: научный журнал/ Национальный исследовательский Томский государственный университет (ТГУ).— , 1957- Т. 59, № 7, ч.2.— 2016.— [С. 81-86] |
|---|---|
| Autor principal: | |
| Autor corporatiu: | , |
| Altres autors: | , |
| Sumari: | Заглавие с экрана Проанализировано изменение физико-механических свойств поверхности с износостойкими покрытиями при определенных условиях модификации подложки образцов из сплава ВК8. Подложку легировали различными элементами (Ti, Cr, Zr и N) методом ионной имплантации. Износостойкие покрытия TiN и TiAlN толщиной ~ 2 мкм были сформированы вакуумно-дуговым методом. The change of physical and mechanical properties of the functional surfaces with wear-resistant coatings after modifications of samples VK8 alloy under certain conditions is described. Substrate was doped with various elements (Ti, Cr, Zr and N) by ion implantation. Wear-resistant coatings TiN and TiAlN (thickness ~ 2 mm) were formed by vacuum-arc method. Режим доступа: по договору с организацией-держателем ресурса |
| Idioma: | rus |
| Publicat: |
2016
|
| Matèries: | |
| Accés en línia: | http://elibrary.ru/item.asp?id=27187764 |
| Format: | Electrònic Capítol de llibre |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=651119 |
Ítems similars
Направленное изменение химического состава подложки для оптимизации свойств износостойких покрытий; Материаловедение, технологии и экология в третьем тысячелетии
per: Ильина А. С. Александра Сергеевна
Publicat: (2016)
per: Ильина А. С. Александра Сергеевна
Publicat: (2016)
Генерация низкотемпературной плазмы дуговых разрядов низкого давления для синтеза износостойких нитридных покрытий; Известия вузов. Физика; Т. 57, № 11-3
Publicat: (2014)
Publicat: (2014)
Получение наноструктурных нитридных покрытий вакуумно-дуговым методом при распылении спечных Ti-Al катодов; Современные проблемы машиностроения
per: Лобач М. И.
Publicat: (2008)
per: Лобач М. И.
Publicat: (2008)
Influence of repetitively-pulsed plasma immersion low energy on implantation to tin coating properties formation; Energy Fluxes and Radiation Effects (EFRE-2016)
Publicat: (2016)
Publicat: (2016)
Исследование каталитических свойств порошков системы «молибден–бор», синтезированных безвакуумным дуговым методом; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 336, № 5
per: Васильева Ю. З. Юлия Захаровна
Publicat: (2025)
per: Васильева Ю. З. Юлия Захаровна
Publicat: (2025)
Structure and Properties of CrN/TiN Multi-Layer Coatings Obtained by Vacuum-Arc Plasma-Assisted Deposition Method; Coatings; Vol. 13, iss. 2
Publicat: (2023)
Publicat: (2023)
Initiation of an Arc Discharge in a Coaxial Magnetoplasma Accelerator; Russian Electrical Engineering; Vol. 89, iss. 3
per: Sivkov A. A. Aleksandr Anatolyevich
Publicat: (2018)
per: Sivkov A. A. Aleksandr Anatolyevich
Publicat: (2018)
On the Hydrogen Permeability and Adhesion of TiN/Ti Coatings Produced on Zr-1% Nb Alloy by Vacuum Ion-Plasma Methods; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 14, iss. 5
Publicat: (2020)
Publicat: (2020)
Synthesis of silicon carbide using an AC atmospheric-pressure arc reactor; Journal of Alloys and Compounds; Vol. 1003
Publicat: (2024)
Publicat: (2024)
Application of Ti-Al Powder Cathodes for Vacuum-Arc Synthesis of Nitride Coatings; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Publicat: (2019)
Publicat: (2019)
High-Intensity Titanium Ion Implantation into Aluminum under Conditions of Repetitively-Pulsed Energy Impact of a Beam on the Surface; Russian Physics Journal; Vol. 67, iss. 5
per: Zaytsev D. D. Daniil Dmitrievich
Publicat: (2024)
per: Zaytsev D. D. Daniil Dmitrievich
Publicat: (2024)
Vacuum-free arc synthesis and characterization of crystalline molybdenum borides as instrumental material; Thermal Science and Engineering Progress; Vol. 67
Publicat: (2025)
Publicat: (2025)
Oxidation Properties of High-Entropy Boride (Ti0.2Zr0.2Nb0.2Hf0.2Ta0.2)B2 Synthesized by DC Arc Discharge Plasma; Bulletin of the Russian Academy of Sciences: Physics; Vol. 89, Suppl. 2
Publicat: (2025)
Publicat: (2025)
Synthesis of Molybdenum Borides by the Impact of an A.C. Arc Discharge in Air; Journal of Engineering Physics and Thermophysics; Vol. 98, iss. 5
Publicat: (2025)
Publicat: (2025)
Formation, Focusing and Transport of Highintensity, Low-Energy Metal Ion Beams; Russian Physics Journal; Vol. 63, iss. 10
Publicat: (2021)
Publicat: (2021)
Study of the influence of a powerful pulsed ion beam on titanium deeply-doped with aluminum; Vacuum; Vol. 217
Publicat: (2023)
Publicat: (2023)
Low-energy high-current plasma immersion implantation of nitrogen ions in plasma of non-self-sustained arc discharge with thermionic and hollow cathodes; Surface and Coatings Technology; Vol. 340
Publicat: (2018)
Publicat: (2018)
Synthesis of Mo2C-based material in DC arc discharge plasma under ambient air conditions; Materials Chemistry and Physics; Vol. 314
Publicat: (2024)
Publicat: (2024)
Accumulation of macroparticles on a substrate in vacuum arc titanium plasma; Известия вузов. Физика; Т. 57, № 12, ч. 3
Publicat: (2014)
Publicat: (2014)
Investigation of Regularities of High-Intensity Ion Implantation in Combination with Subsequent Exposure to the Surface of a High-Current Electron Beam; Energy Fluxes and Radiation Effects (EFRE-2020 online)
Publicat: (2020)
Publicat: (2020)
Применение порошковых катодов Ti-Al, Ti-Al-Si для вакуумно-дугового синтеза нитридных покрытий; Иерархические материалы: разработка и приложения для новых технологий и надежных конструкций
Publicat: (2019)
Publicat: (2019)
Нитридные покрытия, получаемые вакуумно-дуговым методом с помощью порошковых катодов; Современные техника и технологии; Т. 2
per: Гуммер З. И.
Publicat: (2008)
per: Гуммер З. И.
Publicat: (2008)
Synthesis of Crystalline Tungsten Carbide Phases under the Influence of Atmospheric Electrical Arc Plasma on Tungsten Oxide; Journal of Superhard Materials; Vol. 43, iss. 3
Publicat: (2021)
Publicat: (2021)
The phase and elemental co mposition of fil tered arc evaporated TiAlN coatings using separate cathodes; Energy Fluxes and Radiation Effects (EFRE-2016)
Publicat: (2016)
Publicat: (2016)
Experimental Study and Mathematical Modeling of the Processes Occurring in ZrN Coating/Silumin Substrate Systems under Pulsed Electron Beam Irradiation; Coatings; Vol. 11, iss. 12
Publicat: (2021)
Publicat: (2021)
Physical and Mechanical Properties of CrN/AlN Coating Obtained by Vacuum-Arc Deposition with Alternative Separation of Hard Substance Flows; Russian Physics Journal; Vol. 66, iss. 11
Publicat: (2024)
Publicat: (2024)
High-intensity ion beams with submillisecond duration for synergistic of ion implantation and energy impact on the surface; Energy Fluxes and Radiation Effects (EFRE); International Conference on Modification of Materials with Particle Beams and Plasma Flows (16th CMM)
Publicat: (2022)
Publicat: (2022)
Diatomite-based ceramic biocoating for magnesium implants; Ceramics International; Vol. 48, iss. 19
Publicat: (2022)
Publicat: (2022)
Porous Biocoatings Based on Diatomite with Incorporated ZrO2 Particles for Biodegradable Magnesium Implants; Journal of Functional Biomaterials; Vol. 14, iss. 5
Publicat: (2023)
Publicat: (2023)
Obtaining a Material Based on Я-SiC and Carbon Fibers Using an Electric Arc Technique; Inorganic Materials: Applied Research; Vol. 10, iss. 4
Publicat: (2019)
Publicat: (2019)
Influence of Repetitively Pulsed Negative Bias Parameters on Macroparticle Surface Density; Journal of Industrial Pollution Control; Vol. 32, iss. 2
Publicat: (2016)
Publicat: (2016)
Исследование влияния режимов осаждения пленок алмазоподобного углерода на их физико-механические характеристики; Прикладная физика; № 6
Publicat: (2021)
Publicat: (2021)
Study of the synergy effect of high-intensity aluminum ions implantation into titanium and energy impact on the surface; Materials. Technologies. Design; Т. 5, № 3 (13)
Publicat: (2023)
Publicat: (2023)
Влияние конфигурации электродной системы коаксиального магнитоплазменного ускорителя на процесс формирования и развития дугового разряда; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 334, № 8
Publicat: (2023)
Publicat: (2023)
Investigation of High-Intensity Implantation of Titanium Ions into Silicon under Conditions of Beam Energy Impact on the Surface; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 5
Publicat: (2024)
Publicat: (2024)
Functionalizing Diatomite-Based Micro-Arc Coatings for Orthopedic Implants: Influence of TiO2 Addition; Biomimetics; Vol. 8, iss. 3
Publicat: (2023)
Publicat: (2023)
Special Aspects of High-Intensity Low-Energy Ion Implantation; Russian Physics Journal; Vol. 63, iss. 10
Publicat: (2021)
Publicat: (2021)
Thermionic Vacuum Arc-A Versatile Technology for Thin Film Deposition and Its Applications; Coatings; Vol. 10, iss. 3
Publicat: (2020)
Publicat: (2020)
Evaluation of Physicomechanical Properties of Ti-45Nb Specimens Obtained by Selective Laser Melting; Key Engineering Materials; Vol. 743 : High Technology: Research and Applications (HTRA 2016)
per: Kovalevskaya Zh. G. Zhanna Gennadievna
Publicat: (2017)
per: Kovalevskaya Zh. G. Zhanna Gennadievna
Publicat: (2017)
Surface Investigation of Physella Acuta Snail Shell Particle Reinforced Aluminium Matrix Composites; Journal of Functional Biomaterials; Vol. 13, iss. 4
Publicat: (2022)
Publicat: (2022)