Coating synthesis controlled by electron-beam heating; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 140 : Interdisciplinary Problems in Additive Technologies.— 2016.— [012018, 8 p.] |
|---|---|
| 主要作者: | |
| 企業作者: | |
| 其他作者: | , |
| 總結: | Title screen The methods of combined electron-beam treatment of parts made of steel with one- and two-layer coatings are studied experimentally. Ti-Ni, Ni-Al and Al-Ti systems were used as the examples in the experiments. The mathematical model is suggested for coating formation in the controlled regime of high temperature synthesis during high energy source motion along the preliminarily deposited layer of exothermic composition. The study takes into account the difference in thermophysical properties of the materials of coating and substrate, heat release from chemical reaction that leads to the coating properties formation and other factors. The realization of the synthesis depends on technological parameters. Various regimes of the treatment process are investigated numerically. |
| 語言: | 英语 |
| 出版: |
2016
|
| 主題: | |
| 在線閱讀: | http://dx.doi.org/10.1088/1757-899X/140/1/012018 http://earchive.tpu.ru/handle/11683/34869 |
| 格式: | 電子 Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=650731 |
相似書籍
The effect of hydrogen on strain hardening and fracture mechanism of high-nitrogen austenitic steel; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
出版: (2016)
出版: (2016)
Vol. 140 : Interdisciplinary Problems in Additive Technologies: International Seminar, 16–17 December 2015, Tomsk, Russia; [proceedings]; IOP Conference Series: Materials Science and Engineering
出版: (2016)
出版: (2016)
Structure and thermal behavior of zirconium tungstate under heating; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
出版: (2016)
出版: (2016)
Conjugate Problems in Convective Heat Transfer
由: Dorfman A. S. Abram
出版: (New York, Taylor & Francis, 2010)
由: Dorfman A. S. Abram
出版: (New York, Taylor & Francis, 2010)
Problems of Development and Application of Metal Matrix Composite Powders for Additive Technologies; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
出版: (2016)
出版: (2016)
Mathematical modelling of thermal and kinetic phenomena in electron-beam technologies; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
由: Knyazeva A. G. Anna Georgievna
出版: (2016)
由: Knyazeva A. G. Anna Georgievna
出版: (2016)
Composite materials based on high-modulus compounds for additive technology; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
出版: (2016)
出版: (2016)
Development of bioceramic material for spinal surgery implants; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
出版: (2016)
出版: (2016)
Numerical analysis of initial stage of thermal shock; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
由: Demidov V. N. Valery Nikolaevich
出版: (2016)
由: Demidov V. N. Valery Nikolaevich
出版: (2016)
Mechanical Properties of Zirconium Ceramics with Hierarchical Porous Structure; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
由: Kulkov S. N. Sergey Nikolaevich
出版: (2016)
由: Kulkov S. N. Sergey Nikolaevich
出版: (2016)
Phase Composition and Microstructure of Ti-Nb Alloy Produced by Selective Laser Melting; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
出版: (2016)
出版: (2016)
Numerical Study of the Features of Ti-Nb Alloy Crystallization during Selective Laser Sintering; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
由: Dmitriev A. I.
出版: (2016)
由: Dmitriev A. I.
出版: (2016)
Structures Formation on the Y-TZP-AI[2]O[3] Ceramic Composites Surface; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
出版: (2016)
出版: (2016)
The microstructural aspects of abrasive wear resistance in composite electron beam clad coatings; Applied Surface Science; Vol. 293
由: Gnyusov S. F. Sergey Fedorovich
出版: (2014)
由: Gnyusov S. F. Sergey Fedorovich
出版: (2014)
Process Conditions of Forming the Surface Layer of Aluminum Powder Product by Layer-by-layer Laser Sintering; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
出版: (2016)
出版: (2016)
X-Ray Diffraction Analysis of the Sintered Y-TZP-AI[2]O[3] Ceramics; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
出版: (2016)
出版: (2016)
Foundations of Heat Transfer: international student version
出版: (New York, John Wiley & Sons, Inc., 2013)
出版: (New York, John Wiley & Sons, Inc., 2013)
Structure and properties of composite coatings prepared by electron beam melting with “titanium carbide - titanium binder”; Surface and Coatings Technology; Vol. 358
出版: (2019)
出版: (2019)
Neutron Therapy for Salivary and Thyroid Gland Cancer; AIP Conference Proceedings; Vol. 1760 : Physics of Cancer: Interdisciplinary Problems and Clinical Applications 2016
出版: (2016)
出版: (2016)
Heat and Mass Transfer. Fundamentals and Applications
由: Cengel Yu. A. Yunus
出版: (New York, McGraw-Hill, 2011)
由: Cengel Yu. A. Yunus
出版: (New York, McGraw-Hill, 2011)
Mass and Heat Transfer. Analysis of Mass Contactors and Heat Exchangers
由: Russell T. W. F. Fraser
出版: (Cambridge, Cambridge University Press, 2010)
由: Russell T. W. F. Fraser
出版: (Cambridge, Cambridge University Press, 2010)
The influence of ZrB[2]-SiC powders mechanical treatment on the structure of sintered ceramic composites; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
出版: (2016)
出版: (2016)
Nuclear Medicine in Cancer Diagnosis and Therapy; AIP Conference Proceedings; Vol. 1882 : Physics of Cancer: Interdisciplinary Problems and Clinical Applications (PC IPCA’17)
出版: (2017)
出版: (2017)
Chemotherapy Changes Cytotoxic Activity of NK-cells in Cancer Patients; AIP Conference Proceedings; Vol. 1882 : Physics of Cancer: Interdisciplinary Problems and Clinical Applications (PC IPCA’17)
出版: (2017)
出版: (2017)
Численное моделирование и оптимизация электронно-лучевого оплавления напыленных покрытий и пайки сверхтвердых материалов на режущий инструмент: диссертация на соискание ученой степени кандидата физико-математических наук; Спец. 01.04.14
由: Губарьков Д. В. Дмитрий Владимирович
出版: (Томск, 2003)
由: Губарьков Д. В. Дмитрий Владимирович
出版: (Томск, 2003)
Biological-Based and Physical-Based Optimization for Biological Evaluation of Prostate Patient's Plans; AIP Conference Proceedings; Vol. 1882 : Physics of Cancer: Interdisciplinary Problems and Clinical Applications (PC IPCA’17)
由: Sukhikh E. S. Evgeniya Sergeevna
出版: (2017)
由: Sukhikh E. S. Evgeniya Sergeevna
出版: (2017)
Development of electron-beam equipment and technology of layer welding of the wire in the conditions of additive technologies; Gas Discharge Plasmas and Their Applications (GDP 2019)
出版: (2019)
出版: (2019)
Численное моделирование и оптимизация электронно-лучевого оплавления напыленных покрытий и пайки сверхтвердых материалов на режущий инструмент: автореферат диссертации на соискание ученой степени кандидата физико-математических наук; Спец. 01.04.14
由: Губарьков Д. В. Дмитрий Владимирович
出版: (Томск, [Б. и.], 2003)
由: Губарьков Д. В. Дмитрий Владимирович
出版: (Томск, [Б. и.], 2003)
Effect of Conjugated Heat Transfer Conditions on the Crystallization of the Composite Coating; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
由: Anisimova M. A. Mariya Aleksandrovna
出版: (2016)
由: Anisimova M. A. Mariya Aleksandrovna
出版: (2016)
Research of composite fuels thermophysical properties based on low-grade coals with addition of fine sawdust and flour industry wastes; MATEC Web of Conferences; Vol. 110 : Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment (HMTTSC 2017)
出版: (2017)
出版: (2017)
Forming a single layer of a composite powder based on the Ti-Nb system via selective laser melting (SLM); IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
出版: (2016)
出版: (2016)
Fractography of Fatigue Fracture Surface in Silumin Subjected to Electron-Beam Processing; IOP Conference Series: Materials Science and Engineering; Vol. 142 : Innovative Technologies in Engineering
出版: (2016)
出版: (2016)
The influence of non-vacuum electron-beam facing on the structure of Ti-Ta layers formed on the surface of VT1-0 alloy; IOP Conference Series: Materials Science and Engineering; Vol. 124 : Mechanical Engineering, Automation and Control Systems (MEACS2015)
出版: (2016)
出版: (2016)
Investigation of Pm-75 Carbon Black Addition on the Properties of Protective Polymer Coatings; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
出版: (2016)
出版: (2016)
Simulating the Formation of Composite Surface Structure during Electron Beam Treatment; Advanced Materials Research : Advanced materials, synthesis, development and application; Vol. 880 : Prospects of Fundamental Sciences Development (PFSD-2013)
由: Kryukova O. N.
出版: (2014)
由: Kryukova O. N.
出版: (2014)
Численное моделирование и оптимизация электронно- лучевого оплавления напыленных покрытий и пайки сверхтвердых материалов на режущий инструмент: автореферат диссертации на соискание ученой степени кандидата физико-математических наук
由: Губарьков Д. В. Дмитрий Владимирович
出版: (Томск, [Б. и.], 2003)
由: Губарьков Д. В. Дмитрий Владимирович
出版: (Томск, [Б. и.], 2003)
Structure and mechanical characteristics of the hypereutectic silumin subjected to pulsed electron beam treatment; IOP Conference Series: Materials Science and Engineering; Vol. 597 : Prospects of Fundamental Sciences Development (PFSD-2019)
出版: (2019)
出版: (2019)
Hardness and wear resistance of SHS TiC+HSS composite coatings, obtained by electron beam surfacing; Междисциплинарные проблемы аддитивных технологий
出版: (2018)
出版: (2018)
Vacuum electron beam deposition of carbide steels: Part 3. Effect of the number of passes on the structure and phase condition of composite coatings based on R6M5 high-speed steel; Welding International; Vol. 25, iss. 2
出版: (2011)
出版: (2011)
Combined treatment of steel, including electrospark doping and subsequent irradiation with a high-intensity electron beam; IOP Conference Series: Materials Science and Engineering; Vol. 124 : Mechanical Engineering, Automation and Control Systems (MEACS2015)
出版: (2016)
出版: (2016)