Composite materials based on high-modulus compounds for additive technology
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 140 : Interdisciplinary Problems in Additive Technologies.— 2016.— [012009, 11 p.] |
|---|---|
| Corporate Authors: | , |
| Other Authors: | , , , |
| Summary: | Title screen The effect of adding nanocrystalline ZrO[2] and submicron TiC to ultrafine Al[2]O[3] on mechanical properties and the microstructure of the composites developed by hot pressing was investigated. It was shown that by means of hot pressing in argon atmosphere at the sintering temperature of 1500 °C one can obtain the composites of Al[2]O[3]-ZrO[2]-TiC with a fine structure and minimal porosity. It was shown that in the material a multi-scale hierarchical structure is formed, which possesses high physical and mechanical properties: the hardness and fracture toughness was 22 GPa and 5.2 MPa*m1/2, respectively. It has been shown that mechanical properties of the composite are better than those of commercial composites based on aluminum oxide (Al[2]O[3], ZTA, Al[2]O[3]-TiC) and are comparable to those of silicon nitride. |
| Language: | English |
| Published: |
2016
|
| Subjects: | |
| Online Access: | http://dx.doi.org/10.1088/1757-899X/140/1/012009 http://earchive.tpu.ru/handle/11683/34863 |
| Format: | Electronic Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=650714 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 650714 | ||
| 005 | 20240128191543.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\15963 | ||
| 035 | |a RU\TPU\network\15956 | ||
| 090 | |a 650714 | ||
| 100 | |a 20161018a2016 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a GB | ||
| 105 | |a y z 100zy | ||
| 135 | |a drgn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Composite materials based on high-modulus compounds for additive technology |f M. V. Grigoriev [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 11 tit.] | ||
| 330 | |a The effect of adding nanocrystalline ZrO[2] and submicron TiC to ultrafine Al[2]O[3] on mechanical properties and the microstructure of the composites developed by hot pressing was investigated. It was shown that by means of hot pressing in argon atmosphere at the sintering temperature of 1500 °C one can obtain the composites of Al[2]O[3]-ZrO[2]-TiC with a fine structure and minimal porosity. It was shown that in the material a multi-scale hierarchical structure is formed, which possesses high physical and mechanical properties: the hardness and fracture toughness was 22 GPa and 5.2 MPa*m1/2, respectively. It has been shown that mechanical properties of the composite are better than those of commercial composites based on aluminum oxide (Al[2]O[3], ZTA, Al[2]O[3]-TiC) and are comparable to those of silicon nitride. | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\2008 |t IOP Conference Series: Materials Science and Engineering | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\15930 |t Vol. 140 : Interdisciplinary Problems in Additive Technologies |o International Seminar, 16–17 December 2015, Tomsk, Russia |o [proceedings] |v [012009, 11 p.] |d 2016 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a композиционные материалы | |
| 610 | 1 | |a соединения | |
| 610 | 1 | |a присадки | |
| 610 | 1 | |a композиты | |
| 610 | 1 | |a горячее прессование | |
| 610 | 1 | |a физико-механические свойства | |
| 610 | 1 | |a оксид алюминия | |
| 701 | 1 | |a Grigoriev |b M. V. |c specialist in the field of materials science |c Associate Professor of Tomsk Polytechnic University, candidate of technical sciences |f 1984- |g Mikhail Vladimirovich |3 (RuTPU)RU\TPU\pers\36452 | |
| 701 | 1 | |a Kotelnikov |b N. | |
| 701 | 1 | |a Buyakova |b S. P. |c specialist in the field of material science |c Professor of Tomsk Polytechnic University, Doctor of technical sciences |f 1968- |g Svetlana Petrovna |3 (RuTPU)RU\TPU\pers\34758 |9 18108 | |
| 701 | 1 | |a Kulkov |b S. N. |c specialist in the field of material science |c Professor of Tomsk Polytechnic University, Doctor of physical and mathematical sciences |f 1952- |g Sergey Nikolaevich |3 (RuTPU)RU\TPU\pers\31428 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Институт физики высоких технологий (ИФВТ) |b Кафедра материаловедения и технологии металлов (МТМ) |3 (RuTPU)RU\TPU\col\18689 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Институт физики высоких технологий (ИФВТ) |b Кафедра материаловедения в машиностроении (ММС) |3 (RuTPU)RU\TPU\col\18688 |
| 801 | 2 | |a RU |b 63413507 |c 20170120 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1088/1757-899X/140/1/012009 | |
| 856 | 4 | |u http://earchive.tpu.ru/handle/11683/34863 | |
| 942 | |c CF | ||