Fractography of Fatigue Fracture Surface in Silumin Subjected to Electron-Beam Processing; IOP Conference Series: Materials Science and Engineering; Vol. 142 : Innovative Technologies in Engineering

Fractography of Fatigue Fracture Surface in Silumin Subjected to Electron-Beam Processing; IOP Conference Series: Materials Science and Engineering; Vol. 142 : Innovative Technologies in Engineering

Manylion Llyfryddiaeth
Parent link:	IOP Conference Series: Materials Science and Engineering Vol. 142 : Innovative Technologies in Engineering.— 2016.— [012080, 6 p.]
Awdur Corfforaethol:	Национальный исследовательский Томский политехнический университет
Awduron Eraill:	Konovalov S. V., Aksenova K. V., Gromov V. E., Ivanov Yu. F. Yuriy Fedorovich, Semina O. A.
Crynodeb:	Title screen The surface modification of the eutectic silumin with high-intensity pulsed electron beam has been carried out. Multi-cycle fatigue tests were performed and irradiation mode made possible the increase in the silumin fatigue life more than 3.5 times was determined. Studies of the structure of the surface irradiation and surface fatigue fracture of silumin in the initial (unirradiated) state and after modification with intense pulsed electron beam were carried out by methods of scanning electron microscopy. It has been shown, that in mode of partial melting of the irradiation surface the modification process of silicon plates is accompanied by the formation of numerous large micropores along the boundary plate/matrix and microcracks located in the silicon plates. A multi-modal structure (grain size within 30-50 μm with silicon particles up to 10 [mu]m located on the boundaries) is formed in stable melting mode, as well as subgrain structure in the form of crystallization cells from 100 to 250 [mu]m in size). Formation of a multi-modal, multi-phase, submicro- and nanosize structure assisting to a significant increase in the critical length of the crack, the safety coefficient and decrease in step of cracks for loading cycle was the main cause for the increase in silumin fatigue life.
Iaith:	Saesneg
Cyhoeddwyd:	2016
Pynciau:	электронный ресурс труды учёных ТПУ фрактография усталостные разрушения поверхности силумины электронно-лучевая обработка
Mynediad Ar-lein:	http://dx.doi.org/10.1088/1757-899X/142/1/012080 http://earchive.tpu.ru/handle/11683/34755
Fformat:	Electronig Pennod Llyfr
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=650446

Eitemau Tebyg

Structure and mechanical characteristics of the hypereutectic silumin subjected to pulsed electron beam treatment; IOP Conference Series: Materials Science and Engineering; Vol. 597 : Prospects of Fundamental Sciences Development (PFSD-2019)
Cyhoeddwyd: (2019)

Regularities of Structure and Phase Composition Formation of Surface Layer of Silumin Subjected to Electron-Beam Treatment; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
Cyhoeddwyd: (2016)

Modification of the sample's surface of hypereutectic silumin by pulsed electron beam; IOP Conference Series: Materials Science and Engineering; Vol. 124 : Mechanical Engineering, Automation and Control Systems (MEACS2015)
Cyhoeddwyd: (2016)

Fatigue behaviour of CG and UFG titanium: DIC and fractography studies; IOP Conference Series: Materials Science and Engineering; Vol. 511 : Perspective Materials of Constructional and Medical Purpose
gan: Eremin A. V. Alexandr Vyacheslavovich
Cyhoeddwyd: (2019)

Deformation and Fracture of Hypereutectic Silumin Samples with a Surface Modified with an Intense Pulsed Electron Beam; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Cyhoeddwyd: (2019)

Structure-phase states of silumin surface layer after electron beam and high cycle fatigue; Journal of Physics: Conference Series; Vol. 652 : Gas Discharge Plasmas and Their Applications (GDP 2015)
Cyhoeddwyd: (2015)

Microdifractional analysis of the structure of high-speed cellular crystallization of silumine; Gas Discharge Plasmas and Their Applications (GDP 2019)
Cyhoeddwyd: (2019)

The possibility of modification of silumin by an electron beam; Междисциплинарные проблемы аддитивных технологий
gan: Rygina M. E.
Cyhoeddwyd: (2018)

Modifying of the Eutectic Silumin surface by the Electron-Ion-Plasma Method; Perspective Plasma Technologies
Cyhoeddwyd: (2019)

Minkowski functionals and fractography of aluminum alloys; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
gan: Tarasov S. Yu. Sergei Yulievich
Cyhoeddwyd: (2016)

Nanostructuring of a Surface Layer as a Way to Improve the Mechanical Properties of Hypoeutectic Silumin; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
Cyhoeddwyd: (2020)

Т. 4 : Усталость и циклическая трещиностойкость конструкционных материалов; Механика разрушения и прочность материалов
Cyhoeddwyd: (1988)

Minkowski Functionals and Fractography of Aluminum Alloys; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
gan: Tarasov S. Yu. Sergei Yulievich
Cyhoeddwyd: (2016)

Multilevel Hierarchical Structure of Silumin Subjected to Multicycle Surface Alloying; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Cyhoeddwyd: (2019)

Исследование процесса деформирования и разрушения биоинертных сплавов на основе титана и циркония в различных структурных состояниях методом инфракрасной термографии и фрактографиии; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
Cyhoeddwyd: (2015)

Mechanical Properties and Structure of the Hypereutectic Silumin Treated by an Electron Beam; Key Engineering Materials; Vol. 743 : High Technology: Research and Applications (HTRA 2016)
Cyhoeddwyd: (2017)

Исследование процессов роста усталостной трещины при неоднородном нагружении с использованием метода корреляции цифровых изображений; Перспективные материалы конструкционного и медицинского назначения
gan: Заречнев В. В. Владислав Викторович
Cyhoeddwyd: (2018)

The effect of hydrogen on strain hardening and fracture mechanism of high-nitrogen austenitic steel; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
Cyhoeddwyd: (2016)

Fatigue Failure Stages of VT1-0 Titanium in Different Structural States. Study by Acoustic Emission Method; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Cyhoeddwyd: (2016)

Fractography, Fracture Toughness and Structural Turbulence Under Low-Temperature Shock Loading of a Nonequilibrium Titanium Alloy Ti-6Al-4V; Mechanics of Solids; Vol. 55, iss. 5
Cyhoeddwyd: (2020)

Hypereutectic silumin modification by ion-electron-plasma method; Journal of Physics: Conference Series; Vol. 1115 : 6th International Congress "Energy Fluxes and Radiation Effects". 14th International Conference on Modification of Materials with Particle Beams and Plasma Flows (14th CMM)
Cyhoeddwyd: (2018)

Influence of soaking time of modifier in melt on microstructure of Al-12%Si alloys; IOP Conference Series: Materials Science and Engineering; Vol. 177 : Mechanical Engineering, Automation and Control Systems (MEACS 2016)
gan: Martyushev N. V. Nikita Vladimirovich
Cyhoeddwyd: (2017)

Treatment of silumin surface by a modulated submillisecond electron beam; High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes; Vol. 26, iss. 4
Cyhoeddwyd: (2022)

Исследование зон усталостного разрушения шнеков; Инновационные технологии в машиностроении
gan: Епифанцев К. В.
Cyhoeddwyd: (2018)

Lamb wave ultrasonic evaluation of welded AA2024 specimens at tensile static and fatigue testing; IOP Conference Series: Materials Science and Engineering; Vol. 93: Modern Technique and Technologies (MTT'2015)
Cyhoeddwyd: (2015)

Investigation of High-Strength and Heat-Proof Added Metal Characteristics with Thermal Microscopy Facilities; Applied Mechanics and Materials; Vol. 770 : Urgent Problems of Up-to-Date Mechanical Engineering
Cyhoeddwyd: (2015)

Deformation of samples of silumin AK5M2 doped with titanium by irradiation of the film/substrate system with a pulsed electron beam; Materials in External Fields ((ISMEF 2022) )
Cyhoeddwyd: (2022)

Estimation of Temperature Conductivity Coefficient Impact upon Fatigue Damage of Material; IOP Conference Series: Materials Science and Engineering; Vol. 91: VI International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, Yurga, Russia, 21-23 May 2015
gan: Bibik V. L. Vladislav Leonidovich
Cyhoeddwyd: (2015)

Механические свойства металлов. Часть 2: лабораторный практикум
gan: Золоторевский В. С.
Cyhoeddwyd: (Москва, МИСИС, 2021)

Фрактография, прокаливаемость и свойства сплавов
gan: Браун М. П. Михаил Петрович
Cyhoeddwyd: (Киев, Наукова думка, 1966)

Microdiffraction analysis of structure of silumin's high-velocity cellular crystallization; Journal of Physics: Conference Series; Vol. 1393 : Gas Discharge Plasmas and Their Applications (GDP 2019)
Cyhoeddwyd: (2019)

Acoustic emission study on the effect of notch shape and temperature on elastic energy release during impact testing of 17Mn1Si pipe steel; Engineering Fracture Mechanics; Vol. 210
Cyhoeddwyd: (2019)

Исследование процесса разрушения композиционных конструктивных элементов с использованием тензометрии и метода акустической эмиссии; Дефектоскопия; № 9
Cyhoeddwyd: (2004)

Влияние состояния поверхностного слоя на механизмы циклической деформации и усталостного разрушения поликристаллов титана; Новые материалы. Создание, структура, свойства - 2013
gan: Сергеева Е. А.
Cyhoeddwyd: (2013)

Эффекты интерфейса в поверхностных слоях поликристаллов при циклическом нагружении и их роль в усталостном разрушении; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
gan: Елсукова Т. Ф.
Cyhoeddwyd: (2015)

The Investigation of Ultrasonic Mechanical Forging Influence on the Structure and Mechanical Properties of VT23 Welded Joints by Methods of Laser and Electron Beam Welding; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Cyhoeddwyd: (2016)

In situ estimation of fatigue crack parameters by digital image correlation under cyclic loading with single overload; IOP Conference Series: Materials Science and Engineering; Vol. 511 : Perspective Materials of Constructional and Medical Purpose
Cyhoeddwyd: (2019)

Проблемы разрушения металлов и фрактография: материалы семинара
Cyhoeddwyd: (Москва, МДНТП, 1989)

Количественная фрактография: усталостное разрушение
gan: Иванова В. С. Вера Семеновна
Cyhoeddwyd: (Челябинск, Металлургия, 1988)

Фрактография и атлас фрактограмм: справочник: пер. с англ.
Cyhoeddwyd: (Москва, Металлургия, 1982)