Development of a Metal Cutting Tool Fase in Order to Create the Conditions of Ringed Chips Wrapping
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 142 : Innovative Technologies in Engineering.— 2016.— [012063, 8 p.] |
|---|---|
| Corporate Authors: | , |
| Other Authors: | , , , , |
| Summary: | Title screen When processing ductile metals with high cutting speed, there is a need to take additional measures for a comfortable and safe formation and removal of chips. In the conditions of large-scale manufacture, it is recommended to produce flow chips in the form of short fragments, while in the conditions of small-lot and single-piece manufacture, it is reasonable to wrap the chips spirally with a rather small turn radius. Such way of chips formation reduces the time of its removal from the working area as well as facilitates its transportation and processing. In order to solve the problem of chip wrapping and breakage, almost all modern manufacturers of tools with replaceable many-sided plates (RMSP) followed the way of complication of tool faces and determination of the areas of effective chip breaking. On the one hand, the suggested solution turns out to be effective; however, as showed the analysis of recommended cutting modes for complex forms of RMSP made by leading manufacturers, they all correspond to the definite cross section of the cut-layer S/t=0.1. |
| Language: | English |
| Published: |
2016
|
| Subjects: | |
| Online Access: | http://dx.doi.org/10.1088/1757-899X/142/1/012063 http://earchive.tpu.ru/handle/11683/34746 |
| Format: | Electronic Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=650433 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 650433 | ||
| 005 | 20231102025722.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\15651 | ||
| 035 | |a RU\TPU\network\15647 | ||
| 090 | |a 650433 | ||
| 100 | |a 20161005a2016 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a GB | ||
| 105 | |a y z 100zy | ||
| 135 | |a drgn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Development of a Metal Cutting Tool Fase in Order to Create the Conditions of Ringed Chips Wrapping |f M. A. Korchuganova [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 8 tit.] | ||
| 330 | |a When processing ductile metals with high cutting speed, there is a need to take additional measures for a comfortable and safe formation and removal of chips. In the conditions of large-scale manufacture, it is recommended to produce flow chips in the form of short fragments, while in the conditions of small-lot and single-piece manufacture, it is reasonable to wrap the chips spirally with a rather small turn radius. Such way of chips formation reduces the time of its removal from the working area as well as facilitates its transportation and processing. In order to solve the problem of chip wrapping and breakage, almost all modern manufacturers of tools with replaceable many-sided plates (RMSP) followed the way of complication of tool faces and determination of the areas of effective chip breaking. On the one hand, the suggested solution turns out to be effective; however, as showed the analysis of recommended cutting modes for complex forms of RMSP made by leading manufacturers, they all correspond to the definite cross section of the cut-layer S/t=0.1. | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\2008 |t IOP Conference Series: Materials Science and Engineering | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\15319 |t Vol. 142 : Innovative Technologies in Engineering |o VII International Scientific Practical Conference, 19–21 May 2016, Yurga, Russian Federation |o [proceedings] |v [012063, 8 p.] |d 2016 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a металлорежущие инструменты | |
| 610 | 1 | |a пластичные металлы | |
| 610 | 1 | |a режимы резания | |
| 610 | 1 | |a стружка | |
| 701 | 1 | |a Korchuganova |b M. A. |c specialist in the field of informatics and computer engineering |c Associate Professor of Yurga technological Institute of Tomsk Polytechnic University |f 1972- |g Marina Anatolievna |2 stltpush |3 (RuTPU)RU\TPU\pers\34645 |9 18007 | |
| 701 | 1 | |a Syrbakov |b A. P. |c specialist in the field of mechanical engineering |c Associate Professor of Yurga technological Institute of Tomsk Polytechnic University, candidate of technical sciences |f 1975- |g Andrey Pavlovich |2 stltpush |3 (RuTPU)RU\TPU\pers\35615 |9 18784 | |
| 701 | 1 | |a Chernysheva |b T. Yu. |c specialist in the field of informatics and computer engineering |c Associate Professor of Yurga technological Institute of Tomsk Polytechnic University, Candidate of technical sciences |f 1974- |g Tatiana Yurievna |2 stltpush |3 (RuTPU)RU\TPU\pers\35630 |9 18799 | |
| 701 | 1 | |a Ivanov |b G. | |
| 701 | 1 | |a Korchuganov |b M. A. |c specialist in the field of mechanical engineering |c educational master of Yurga technological Institute of Tomsk Polytechnic University |f 1985- |g Maksim Anatolievich |2 stltpush |3 (RuTPU)RU\TPU\pers\34720 |9 18070 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Юргинский технологический институт (филиал) (ЮТИ) |b Кафедра технологии машиностроения (ТМС) |h 356 |2 stltpush |3 (RuTPU)RU\TPU\col\18902 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Юргинский технологический институт (филиал) (ЮТИ) |b Кафедра информационных систем (ИС) |h 1492 |2 stltpush |3 (RuTPU)RU\TPU\col\18893 |
| 801 | 2 | |a RU |b 63413507 |c 20170417 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1088/1757-899X/142/1/012063 | |
| 856 | 4 | |u http://earchive.tpu.ru/handle/11683/34746 | |
| 942 | |c CF | ||