Inaccuracy Determination in Mathematical Model of Labsocs Efficiency Calibration Program

Xehetasun bibliografikoak
Parent link:IOP Conference Series: Materials Science and Engineering
Vol. 142 : Innovative Technologies in Engineering.— 2016.— [012050, 5 p.]
Egile nagusia: Kuznetsov M. S. Mikhail Sergeyevich
Erakunde egilea: Национальный исследовательский Томский политехнический университет (ТПУ) Физико-технический институт (ФТИ) Кафедра физико-энергетических установок (№ 21) (ФЭУ)
Beste egile batzuk: Nikishkin T., Chursin S. S. Stanislav Sergeevich
Gaia:Title screen
The study of radioactive materials quantitative inaccuracy determination caused by semiconductor detector aging is presented in the article. The study was conducted using a p- type coaxial GC 1518 detector made of a high-purity germanium produced by Canberra Company and LabSOCS mathematical efficiency calibration program. It was discovered that during 8 years of operation the efficiency of the detector had decreased due to increase of the dead layer of the germanium crystal. Increasing the thickness of the dead layer leads to 2 effects, which influence on the efficiency decrease: the shielding effect and the effect of reducing the active volume of the germanium crystal. It is found that the shielding effect contributes at energies below 88 keV. At energies above 88 keV the inaccuracy is connected with the decrease of the germanium crystal active volume, caused by lithium thermal diffusion.
Hizkuntza:ingelesa
Argitaratua: 2016
Gaiak:
Sarrera elektronikoa:http://dx.doi.org/10.1088/1757-899X/142/1/012050
http://earchive.tpu.ru/handle/11683/34733
Formatua: Baliabide elektronikoa Liburu kapitulua
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=650420
Deskribapena
Gaia:Title screen
The study of radioactive materials quantitative inaccuracy determination caused by semiconductor detector aging is presented in the article. The study was conducted using a p- type coaxial GC 1518 detector made of a high-purity germanium produced by Canberra Company and LabSOCS mathematical efficiency calibration program. It was discovered that during 8 years of operation the efficiency of the detector had decreased due to increase of the dead layer of the germanium crystal. Increasing the thickness of the dead layer leads to 2 effects, which influence on the efficiency decrease: the shielding effect and the effect of reducing the active volume of the germanium crystal. It is found that the shielding effect contributes at energies below 88 keV. At energies above 88 keV the inaccuracy is connected with the decrease of the germanium crystal active volume, caused by lithium thermal diffusion.
DOI:10.1088/1757-899X/142/1/012050