Zirconia-based solid electrolyte obtained by tape casting
| Parent link: | Inorganic Materials: Applied Research.— , 2010- Vol. 7, iss. 2.— 2016.— [P. 278-284] |
|---|---|
| Corporate Authors: | Национальный исследовательский Томский политехнический университет Институт неразрушающего контроля Проблемная научно-исследовательская лаборатория электроники, диэлектриков и полупроводников, Национальный исследовательский Томский политехнический университет Институт неразрушающего контроля Кафедра физических методов и приборов контроля качества |
| Other Authors: | Tiunova O. V. Olga Vasiljevna, Khabas (Habas) T. A. Tamara Andreevna, Bredikhin S. I. Sergey Ivanovich, Kuritsina I. E. Irina Evgenjevna |
| Summary: | Title screen The possibility of using tape casting to produce solid electrolyte films with a thickness of 100–300 ?m from zirconia stabilized with oxides of scandium and cerium is considered. A method of slip casting onto a moving tape is used to produce rather thin ceramic sheets with a thickness of less than 1 mm. An organic slip based on azeotropic mixture of isopropyl alcohol and methyl ethyl ketone is used in the present work. The effect of solvents on the properties of the obtained film and sintered ceramic is analyzed. Dibutylphthalate, polyethylene glycol, and benzyl butylphthalate are used as plasticizers. The effectiveness of these plasticizers is based on the possibility of producing a slip with a viscosity of 2000–4000 mPa s by using them. Polyvinyl butyral appears to be the most optimal temporary binder, because it is satisfactorily removed in a continuous mode of annealing of plated ceramic blanks. The maximum density of ceramic plates is achieved at the annealing temperature of 1500°C. It is shown that the working range of the obtained solid electrolyte is 800–850°C, as the maximum ionic conductivity (more than 0.15 ??1 cm?1) is registered in it. Режим доступа: по договору с организацией-держателем ресурса |
| Published: |
2016
|
| Subjects: | |
| Online Access: | http://dx.doi.org/10.1134/S2075113316020222 |
| Format: | Electronic Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=649713 |
Similar Items
Zirconia-based sintered ceramics for biomedical applications
by: Kulkov S. N. Sergey Nikolaevich
Published: (2016)
by: Kulkov S. N. Sergey Nikolaevich
Published: (2016)
Irradiation by a low-energy pulsed electron beam of zirconia-based composite
Published: (2019)
Published: (2019)
Properties of Zirconia after Plasma Treatment
by: Alekseenko V. P.
Published: (2017)
by: Alekseenko V. P.
Published: (2017)
Effect of Carbon Nanotubes and Graphene Nanoplatelets on the Mechanical Properties of Zirconia-Based Composites
Published: (2020)
Published: (2020)
Porous Ceramics Obtained with the Use of Aluminum Hydroxide Powder
Published: (2015)
Published: (2015)
Properties of the Zirconia Nanopowders Synthesized by the Chemical Precipitation Method after Long-Time Keeping
by: Klevtsova E. V. Ekaterina
Published: (2018)
by: Klevtsova E. V. Ekaterina
Published: (2018)
Formation of Pore Structure in Zirconia-Alumina Ceramics
Published: (2018)
Published: (2018)
Implementation of the Cook-Gordon Mechanism in Y-TZP Based Ceramics
by: Buyakov A. S. Ales Sergeevich
Published: (2019)
by: Buyakov A. S. Ales Sergeevich
Published: (2019)
Горение нанопорошка алюминия с добавками диоксида титана и циркония
by: Шинкевич Е. В. Екатерина Викторовна
Published: (2012)
by: Шинкевич Е. В. Екатерина Викторовна
Published: (2012)
Синтез микроволокон диоксида циркония из водных растворов
by: Гузеев В. В.
Published: (2002)
by: Гузеев В. В.
Published: (2002)
Исследование процесса высаливания микроволокон ZrOCl2×8H2o из раствора под действием соляной кислоты
by: Смороков А. А. Андрей Аркадьевич
Published: (2015)
by: Смороков А. А. Андрей Аркадьевич
Published: (2015)
Investigation with using thermal analysis of gas evolution and sinteringof nanopowders of zirconia prepared by sol-gel method
Published: (2020)
Published: (2020)
Получение диоксида циркония фтороаммонийным методом
by: Черных Д. В. Денис Вячеславович
Published: (2024)
by: Черных Д. В. Денис Вячеславович
Published: (2024)
Получение диоксида циркония с использованием фторидов аммония
by: Смороков А. А. Андрей Аркадьевич
Published: (2017)
by: Смороков А. А. Андрей Аркадьевич
Published: (2017)
Effects of sintering curves on microstructure, physical and mechanical properties and on low temperature degradation of zirconia-toughened alumina
Published: (2021)
Published: (2021)
Влияние термоударных нагружений на структуру циркониевой керамики
by: Деркач Е. А. Евгений Александрович
Published: (2016)
by: Деркач Е. А. Евгений Александрович
Published: (2016)
Properties of Foam Glass Material Modified by Nanosize Zirconium Dioxide
Published: (2016)
Published: (2016)
Определение оптимальных условий вскрытия циркониевого концентрата расплавом гидродифторида аммония
by: Миклашевич А. А.
Published: (2024)
by: Миклашевич А. А.
Published: (2024)
Structural Phase State of the Ceramic Layer of ZrO[2]
Published: (2015)
Published: (2015)
Особенности формирования нано- и микроструктур порошков монолитных образцов ZrO2 при обжиге без наложения и с наложением электромагнитного поля
Published: (2015)
Published: (2015)
Dependence of grain size on temperature in a layer of coating based on Zr-Y-O in a multilayer coating Zr-Y-O/Si-Al-N
Published: (2018)
Published: (2018)
The Influence of the Irregular Interface Geometry on Fracture of EB-PVD Yttria-Stabilized Zirconia Coatings
Published: (2018)
Published: (2018)
Исследование свойств керамики на основе диоксида циркония различных составов, полученной с применением ультразвуковых колебаний
by: Деркач Е. А.
Published: (2015)
by: Деркач Е. А.
Published: (2015)
Структурно-фазовое состояние керамики на основе ZrO[2]
by: Толкачёв О. С. Олег Сергеевич
Published: (2014)
by: Толкачёв О. С. Олег Сергеевич
Published: (2014)
Влияние ультразвукового воздействия на нанопорошок TZ-3Y-S
by: Толкачёв О. С. Олег Сергеевич
Published: (2013)
by: Толкачёв О. С. Олег Сергеевич
Published: (2013)
Твердый электролит на основе диоксида циркония, полученный методом пленочного литья
Published: (2015)
Published: (2015)
Керамический композит на основе диоксида циркония, армированный одностенными углеродными нанотрубками
Published: (2019)
Published: (2019)
Действие ионной обработки на структурно-фазовую перестройку циркониевой керамики
by: Гынгазов С. А. Сергей Анатольевич
Published: (2020)
by: Гынгазов С. А. Сергей Анатольевич
Published: (2020)
Особенности спекания гидроксиапатита твердофазного синтеза с добавками нанодисперсных оксидов
by: Балтабаева Н. М.
Published: (2024)
by: Балтабаева Н. М.
Published: (2024)
Керамика на основе диоксида циркония с направленной пористостью
by: Камышная К. С. Ксения Сергеевна
Published: (2016)
by: Камышная К. С. Ксения Сергеевна
Published: (2016)
The Structure and Properties of Yttrium-Stabilized Zirconium Dioxide Ceramics Treated by Electron Beam
Published: (2016)
Published: (2016)
Керамика на основе частично стабилизированного диоксида циркония
by: Толкачёв О. С. Олег Сергеевич
Published: (2014)
by: Толкачёв О. С. Олег Сергеевич
Published: (2014)
Структура и механические свойства композитов на основе диоксида циркония и волластонита
by: Чатчай Дуанзупа
Published: (2012)
by: Чатчай Дуанзупа
Published: (2012)
Влияние пористости на характер разрушения керамики на основе диоксида циркония и оксида алюминия
Published: ()
Published: ()
Трение и износ трансформационно-упрочненных керамических и металлокерамических композитов в условиях высокоскоростного скольжения
by: Савченко Н. Л. Николай Леонидович
Published: (2009)
by: Савченко Н. Л. Николай Леонидович
Published: (2009)
Еlectron microscopy studies of near-surface layers of ZRO2(Y)-AL2O3 composite ceramic modified by high-current beam of low-energy electrons
Published: (2014)
Published: (2014)
Влияние давления прессования компактов из ультрадисперсного порошка диоксида циркония, допированного оксидом висмута, на эффективность уплотнения при термическом спекании и механические свойства спеченной керамики
by: Гынгазов С. А. Сергей Анатольевич
Published: (2017)
by: Гынгазов С. А. Сергей Анатольевич
Published: (2017)
Поверхностная модификация ZRO2-3Y2O3 интенсивными импульсными ионными пучками N2+
Published: (2020)
Published: (2020)
Спарк-плазменное спекание и люминесцентные свойства YSZ керамики допированной европием
by: Жвакина П. Д.
Published: (2018)
by: Жвакина П. Д.
Published: (2018)
Влияние порообразующих добавок на структуру керамики на основе ZrO2
by: Ануфриев А. О.
Published: (2013)
by: Ануфриев А. О.
Published: (2013)
Similar Items
-
Zirconia-based sintered ceramics for biomedical applications
by: Kulkov S. N. Sergey Nikolaevich
Published: (2016) -
Irradiation by a low-energy pulsed electron beam of zirconia-based composite
Published: (2019) -
Properties of Zirconia after Plasma Treatment
by: Alekseenko V. P.
Published: (2017) -
Effect of Carbon Nanotubes and Graphene Nanoplatelets on the Mechanical Properties of Zirconia-Based Composites
Published: (2020) -
Porous Ceramics Obtained with the Use of Aluminum Hydroxide Powder
Published: (2015)