The integrated method to select drilling muds for abnormally high pressure formations; IOP Conference Series: Earth and Environmental Science; Vol. 33 : Contemporary Issues of Hydrogeology, Engineering Geology and Hydrogeoecology in Eurasia
| Parent link: | IOP Conference Series: Earth and Environmental Science Vol. 33 : Contemporary Issues of Hydrogeology, Engineering Geology and Hydrogeoecology in Eurasia.— 2016.— [012039, 6 p.] |
|---|---|
| Enti autori: | , |
| Altri autori: | , , , , |
| Riassunto: | Title screen The article describes the method for choosing a drilling mud for drilling abnormally high pressure formations. A carefully selected drilling mud formulation would not only enhance an array of interrelated fluid properties, but also minimize the impact on the pay zones when the drill bit first penetrates the pay. To ensure a better assessment of drilling mud impact on the pay zone, it is reasonable to carry out the study focused on the analysis of technological parameters, involving filtration, acid and drilling mud tests, as well as formation damage analysis. This would enable evaluating the degree of mudding off, reservoirs acid fracturing effect and the risks of pipe sticking at significant depth. The article presents the results of the above-described study with regard to the currently used drilling mud and new experimental formulations developed at National Research Tomsk Polytechnic University (Drilling Mud and Cement Slurry Laboratory). |
| Lingua: | inglese |
| Pubblicazione: |
2016
|
| Serie: | Well drilling |
| Soggetti: | |
| Accesso online: | http://dx.doi.org/10.1088/1755-1315/33/1/012039 http://earchive.tpu.ru/handle/11683/33998 |
| Natura: | Elettronico Capitolo di libro |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=649500 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 649500 | ||
| 005 | 20231220103313.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\14662 | ||
| 035 | |a RU\TPU\network\14661 | ||
| 090 | |a 649500 | ||
| 100 | |a 20160726a2016 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a GB | ||
| 105 | |a y z 100zy | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a The integrated method to select drilling muds for abnormally high pressure formations |f V. S. Khorev [et al.] | |
| 203 | |a Text |c electronic | ||
| 225 | 1 | |a Well drilling | |
| 300 | |a Title screen | ||
| 320 | |a [References: 5 tit.] | ||
| 330 | |a The article describes the method for choosing a drilling mud for drilling abnormally high pressure formations. A carefully selected drilling mud formulation would not only enhance an array of interrelated fluid properties, but also minimize the impact on the pay zones when the drill bit first penetrates the pay. To ensure a better assessment of drilling mud impact on the pay zone, it is reasonable to carry out the study focused on the analysis of technological parameters, involving filtration, acid and drilling mud tests, as well as formation damage analysis. This would enable evaluating the degree of mudding off, reservoirs acid fracturing effect and the risks of pipe sticking at significant depth. The article presents the results of the above-described study with regard to the currently used drilling mud and new experimental formulations developed at National Research Tomsk Polytechnic University (Drilling Mud and Cement Slurry Laboratory). | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\2499 |t IOP Conference Series: Earth and Environmental Science | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\14178 |t Vol. 33 : Contemporary Issues of Hydrogeology, Engineering Geology and Hydrogeoecology in Eurasia |o All-Russian Scientific Conference with International Participation on Contemporary Issues, 23–27 November 2015, Tomsk, Russia |v [012039, 6 p.] |d 2016 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a буровые растворы | |
| 610 | 1 | |a высокое давление | |
| 610 | 1 | |a бурение | |
| 610 | 1 | |a пласты | |
| 610 | 1 | |a продуктивные зоны | |
| 610 | 1 | |a цементные растворы | |
| 701 | 1 | |a Khorev |b V. S. |c a specialist in the field of nondestructive testing |c engineer at Tomsk Polytechnic University |f 1987- |g Vladimir Sergeevich |3 (RuTPU)RU\TPU\pers\34937 | |
| 701 | 1 | |a Dmitriev |b A. Yu. |c specialist in the field of oil and gas business |c Associate Professor of Tomsk Polytechnic University, Vice-rector - Director, Candidate of technical sciences |f 1972- |g Andrey Yurievich |3 (RuTPU)RU\TPU\pers\34014 | |
| 701 | 1 | |a Boyko |b I. A. |c expert in the field of oilfield equipment |c Assistant of the Department of Tomsk Polytechnic University |f 1966- |g Igor Alekseevich |3 (RuTPU)RU\TPU\pers\34936 | |
| 701 | 1 | |a Kayumova |b N. S. | |
| 701 | 1 | |a Rakhimov |b T. R. |c economist |c Associate Professor of Tomsk Polytechnic University, Candidate of economic sciences |f 1977- |g Timur Rustamovich |3 (RuTPU)RU\TPU\pers\31052 |9 15282 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Институт природных ресурсов (ИПР) |b Кафедра бурения скважин (БС) |3 (RuTPU)RU\TPU\col\18666 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Институт социально-гуманитарных технологий (ИСГТ) |b Кафедра менеджмента (МЕН) |3 (RuTPU)RU\TPU\col\18855 |
| 801 | 2 | |a RU |b 63413507 |c 20161129 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1088/1755-1315/33/1/012039 | |
| 856 | 4 | |u http://earchive.tpu.ru/handle/11683/33998 | |
| 942 | |c CF | ||