Numerical and experimental research of heat and mass transfer at the heterogeneous system ignition by local energy source with limited heat content; Mathematical Problems in Engineering; Vol. 2014, article ID 281527

Numerical and experimental research of heat and mass transfer at the heterogeneous system ignition by local energy source with limited heat content; Mathematical Problems in Engineering; Vol. 2014, article ID 281527

Bibliographic Details
Parent link:	Mathematical Problems in Engineering: open access journal.— , 1995 Vol. 2014, article ID 281527.— 2014.— [9 р.]
Main Author:	Glushkov D. O. Dmitry Olegovich
Corporate Author:	Национальный исследовательский Томский политехнический университет Энергетический институт Кафедра теоретической и промышленной теплотехники
Other Authors:	Kuznetsov G. V. Geny Vladimirovich, Strizhak P. A. Pavel Alexandrovich
Summary:	Title screen Numerical and experimental investigations were executed for determination of macroscopic regularities of heat and mass transfer processes under the conditions of the phase transformations and chemical reaction at the ignition of vapors coming from fabrics impregnated by combustible liquid into oxidant area at the local power supply. It was established that initial temperature ?p>1 of local energy source and volume fraction ?>30% of combustible liquid vapors in fabric are necessary for realization of ignition conditions in a system "fabric - combustible liquid - oxidant.". Thus three ignition modes are possible for such system. The most widespread mode is an arrangement of ignition zone near the lateral side of local energy source. Also we obtained approximating expressions of ignition delay time on initial temperature and characteristic size of a local energy source for fabrics impregnated by some kinds of combustible liquids (gasoline, kerosene, and diesel fuel). Its dependences may be useful at engineering calculations of fire danger for processes of single hot particles interaction with liquid combustible substances.
Language:	English
Published:	2014
Subjects:	электронный ресурс труды учёных ТПУ тепломассообмен зажигание исследование фазовые превращения химические реакции воспламенение горючие жидкости пары источники энергии
Online Access:	http://dx.doi.org/10.1155/2014/281527
Format:	Electronic Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=649429

Similar Items

Mathematical model of dispersed coal layer ignition by the penetrated local heating source; AIP Conference Proceedings; Vol. 2135 : Heat and mass transfer in the thermal control system of technical and technological energy equipment (HMTTSC 2019)
by: Glushkov D. O. Dmitry Olegovich
Published: (2019)

Numerical study of the effect of burnout on the ignition characteristics of polymer under local heating; Combustion, Explosion, and Shock Waves; Vol. 53, iss. 2
by: Glushkov D. O. Dmitry Olegovich
Published: (2017)

Stability of composite solid propellant ignition by a local source of limited energy capacity; Combustion, Explosion, and Shock Waves; Vol. 50, iss. 6
by: Glushkov D. O. Dmitry Olegovich
Published: (2014)

Ignition of dispersed coal in local conductive heating conditions; Journal of Physics: Conference Series; Vol. 1105 : XXXIV Siberian Thermophysical Seminar
by: Glushkov D. O. Dmitry Olegovich
Published: (2018)

Numerical simulation of gel fuel gas-phase ignition by a local source of limited heat content; Acta Astronautica; Vol. 163
Published: (2019)

Fire Danger of Interaction Processes of Local Sources with a Limited Energy Capacity and Condensed Substances; MATEC Web of Conferences; Vol. 37 : Smart Grids 2015
by: Glushkov D. O. Dmitry Olegovich
Published: (2015)

Mathematical Modeling of Heat and Mass Transfer Processes with Chemical Reaction at Polymeric Material Ignition by Several Small-Size Hot Particles; Mathematical Problems in Engineering; Vol. 2015, article ID 614143
by: Glushkov D. O. Dmitry Olegovich
Published: (2015)

Features of mathematical model for ignition process of a metallized condensed substance by a local energy source; IOP Conference Series: Materials Science and Engineering; Vol. 66: 20th International Conference for Students and Young Scientists: Modern Techniques and Technologies (MTT'2014), Tomsk, Russia, 14-18 April 2014
by: Glushkov D. O. Dmitry Olegovich
Published: (2014)

Simulation of the process of coal dust ignition in the presence of metal particles; Solid Fuel Chemistry; Vol. 51, iss. 1
by: Glushkov D. O. Dmitry Olegovich
Published: (2017)

Ignition of a coal particle on a heated surface; Solid Fuel Chemistry; Vol. 50, iss. 4
Published: (2016)

Ignition of a coal particle at the low temperature of gas flow; European Physical Journal Web of Conferences (EPJ Web of Conferences); Vol. 82 : Thermophysical Basis of Energy Technologies
by: Glushkov D. O. Dmitry Olegovich
Published: (2015)

Heat and Mass Transfer at Hot Surface Ignition of Coal Particle; MATEC Web of Conferences; Vol. 23 : Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment
Published: (2015)

Ignition of coal-water fuel particles under the conditions of intense heat; Applied Thermal Engineering; Vol. 106
Published: (2016)

The gel fuel ignition at local conductive heating; International Journal of Heat and Mass Transfer; Vol. 127, pt. C
by: Glushkov D. O. Dmitry Olegovich
Published: (2018)

The ignition fragment wood heated to a high temperature of the plate; MATEC Web of Conferences; Vol. 23 : Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment
by: Zakharevich A. V. Arkadiy Vladimirovich
Published: (2015)

Numerical research of heat and mass transfer at the ignition of system "fabric - combustible liquid - oxidant" by the local energy source; European Physical Journal Web of Conferences (EPJ Web of Conferences); Vol. 82 : Thermophysical Basis of Energy Technologies
by: Glushkov D. O. Dmitry Olegovich
Published: (2015)

Ignition of liquid droplets fuels under conditions of radiation-conductive heating in air; MATEC Web of Conferences; Vol. 194 : Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment (HMTTSC 2018)
by: Zakharevich A. V. Arkadiy Vladimirovich
Published: (Les Ulis, EDP Sciences, 2018)

Experimental Study of the Influence of the Structure of Local Energy Sources on the Conditions and Characteristics of the Ignition of Liquid Fuels; Journal of Engineering Physics and Thermophysics; Vol. 89, iss. 3
by: Zakharevich A. V. Arkadiy Vladimirovich
Published: (2016)

Numerical Investigation of Water Droplets Shape Influence on Mathematical Modeling Results of Its Evaporation in Motion through a High-Temperature Gas; Mathematical Problems in Engineering; Vol. 2014, article ID 920480
by: Glushkov D. O. Dmitry Olegovich
Published: (2014)

Numerical research of heat and mass transfer during low-temperature ignition of a coal particle; Thermal Science; Vol. 19, iss. 1
by: Glushkov D. O. Dmitry Olegovich
Published: (2015)

Heat and Mass Transfer at Ignition of Solid Condensed Substance with Relatively Low Calorific Power by a Local Energy Source; Journal of Engineering Thermophysics; Vol. 21, iss. 1
by: Glushkov D. O. Dmitry Olegovich
Published: (2012)

Heat transfer under ignition of droplet of composite liquid fuel made of coal, water and oil in an oxidant flow; Advances and Applications in Fluid Mechanics; Vol. 19, iss. 1
Published: (2016)

Influence of heating intensity and size of gel fuel droplets on ignition characteristics; International Journal of Heat and Mass Transfer; Vol. 156
by: Glushkov D. O. Dmitry Olegovich
Published: (2020)

Numerical Study of Heat and Mass Transfer at the Ignition of Condensed Substances by Hot Particles; Key Engineering Materials; Vol. 683 : Multifunctional Materials: Development and Application
by: Glushkov D. O. Dmitry Olegovich
Published: (2016)

Mathematical Simulation of Heat and Mass Transfer Processes at the Ignition of Liquid Fuel by Concentrated Flux of Radiation; Mathematical Problems in Engineering; Vol. 2014, article ID 156150
by: Vysokomornaya O. V. Olga Valeryevna
Published: (2014)

Ignition of Wet Wood Particles in the Stream of High-Temperature Gases; MATEC Web of Conferences; Vol. 72 : Heat and Mass Transfer in the System of Thermal Modes of Energy – Technical and Technological Equipment (HMTTSC-2016)
by: Syrodoy S. V. Semen Vladimirovich
Published: (2016)

Dynamic ignition regime of condensed system by radiate heat flux; Journal of Physics: Conference Series; Vol. 830 : Energy Fluxes and Radiation Effects 2016
Published: (2017)

Mathematical modeling of energy effective ignition of gel-like fuel at local heating; Mechanical Engineering, Automation and Control Systems (MEACS)
by: Glushkov D. O. Dmitry Olegovich
Published: (2014)

Conditions and Characteristics of Coal Water Slurry Containing Petrochemicals Ignition by Hot Particle; MATEC Web of Conferences; Vol. 72 : Heat and Mass Transfer in the System of Thermal Modes of Energy – Technical and Technological Equipment (HMTTSC-2016)
Published: (2016)

Features of thermal behavior and ignition of HEM with bimetal powders; MATEC Web of Conferences; Vol. 194 : Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment (HMTTSC 2018)
by: Korotkikh A. G. Aleksandr Gennadievich
Published: (Les Ulis, EDP Sciences, 2018)

Change in Ignition Characteristics Of Composite Liquid Fuel Droplet While Varying the Combustible Liquid Content; MATEC Web of Conferences; Vol. 37 : Smart Grids 2015
by: Kosintsev A. G.
Published: (2015)

Ignition of pelletized mixed fuels based on 3B grade coal and wood waste; AIP Conference Proceedings; Vol. 2135 : Heat and mass transfer in the thermal control system of technical and technological energy equipment (HMTTSC 2019)
by: Yankovsky S. A. Stanislav Aleksandrovich
Published: (2019)

Ignition of the Soaring Droplet Sets of Waste-Derived Coal-Water Slurry With Petrochemicals; MATEC Web of Conferences; Vol. 72 : Heat and Mass Transfer in the System of Thermal Modes of Energy – Technical and Technological Equipment (HMTTSC-2016)
Published: (2016)

Effect of the shape of wet wood particles on ignition characteristics; MATEC Web of Conferences; Vol. 110 : Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment (HMTTSC 2017)
by: Syrodoy S. V. Semen Vladimirovich
Published: (2017)

Comparison of the ignition characteristics of fuel based on bituminous coal and biomass during combustion in moving bed and entrained flow; AIP Conference Proceedings; Vol. 2135 : Heat and mass transfer in the thermal control system of technical and technological energy equipment (HMTTSC 2019)
by: Yankovsky S. A. Stanislav Aleksandrovich
Published: (2019)

Variation of heating and ignition conditions for composite liquid fuel droplets on addition of dressed coal; JP Journal of Heat and Mass Transfer; Vol. 13, iss. 1
by: Glushkov D. O. Dmitry Olegovich
Published: (2016)

Coniferous Tree Ignition by Cloud-to-Ground Lightning Discharge Using Approximation of "Ideal" Crack in Bark; JP Journal of Heat and Mass Transfer; Vol. 14, iss. 1
by: Baranovskiy N. V. Nikolay Viktorovich
Published: (2016)

Numerical simulation of solid-phase ignition of metallized condensed matter by a particle heated to a high temperature; Russian Journal of Physical Chemistry B; Vol. 5, iss. 6
by: Glushkov D. O. Dmitry Olegovich
Published: (2011)

Conditions and Characteristics of the Ignition of a Typical Vegetable Combustible Material by a Local Energy Source; Journal of Engineering Physics and Thermophysics; Vol. 89, iss. 6
by: Baranovskiy N. V. Nikolay Viktorovich
Published: (2016)

Fire danger of interaction processes between local heat sources and condensed substances; Environmental Protection and Sustainable Ecological Development: EPSED 2014
by: Glushkov D. O. Dmitry Olegovich
Published: (2015)