Dry Friction of Pure Aluminum against Steel; Journal of Friction and Wear; Vol. 37, iss. 1

Dry Friction of Pure Aluminum against Steel; Journal of Friction and Wear; Vol. 37, iss. 1

Bibliografske podrobnosti
Parent link:	Journal of Friction and Wear Vol. 37, iss. 1.— 2016.— [P. 86-93]
Glavni avtor:	Rusin N. M. Nikolay Martemjyanovich
Drugi avtorji:	Skorentsev A. L. Aleksandr Leonidovich, Kolubaev Е. А. Evgeny Aleksandrovich
Izvleček:	Title screen The behavior of aluminum during dry friction against a steel disk is studied. It has been found that, in the course of dry friction, severe wear of the surfaces of both materials occurs. With an increase in the applied pressure, the wear intensity of the friction pair grows, while the coefficient of friction decreases. The examination of the structure of the subsurface layers of the aluminum specimens has shown that the deformation that occurs in these layers makes a substantial contribution to the wear of these specimens. Режим доступа: по договору с организацией-держателем ресурса
Jezik:	angleščina
Izdano:	2016
Teme:	электронный ресурс труды учёных ТПУ трение алюминий интенсивность
Online dostop:	http://dx.doi.org/10.3103/S1068366616010141
Format:	Elektronski Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=649273

Podobne knjige/članki

Wear Mechanisms of Sintered Self-Lubricating Al-based Composites under Dry Friction; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
od: Rusin N. M.
Izdano: (2015)

General regularities of the microstructure formation during friction stir welding and sliding friction; Journal of Friction and Wear; Vol. 36, iss. 2
Izdano: (2015)

Effect of friction on subsurface layer microstructure in austenitic and martensitic steels; Wear; Vol. 231, iss. 2
od: Tarasov S. Yu. Sergei Yulievich
Izdano: (1999)

Joining of Aluminum Alloys with Friction Stir Welding Method; Космическое приборостроение
od: Semenchuk V. M.
Izdano: (2015)

The effect of pulsed electron beam melting on microstructure, friction and wear of WC–Hadfield steel hard metal; Wear; Vol. 257, iss. 1-2
Izdano: (2004)

Transition between Modes of Adhesion and Sliding Friction in Contacts of Axially Symmetric Bodies; Journal of Friction and Wear; Vol. 40, iss. 1
od: Lyashenko Ya. A. Yakov Aleksandrovich
Izdano: (2019)

Reduction of friction by normal oscillations. I. Influence of contact stiffness; Friction; Vol. 5, iss. 1
od: Popov M. Mikhail
Izdano: (2017)

The Macrostructure of Al-40Sn Alloy and Its Tribological Properties under Dry Friction; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
od: Rusin N. M.
Izdano: (2016)

Subsurface layer formation during sliding friction; Wear; Vol. 249, iss. 10-11
Izdano: (2001)

Study of friction reduction by nanocopper additives to motor oil; Wear; Vol. 252, iss. 1-2
Izdano: (2002)

Active control of friction by transverse oscillations; Friction; Vol. 7, iss. 1
Izdano: (2019)

Friction-Burnishing Treatment of Medium-Carbon Steel; Metal Science and Heat Treatment; Vol. 57, iss. 5
od: Tarasov S. Yu. Sergei Yulievich
Izdano: (2015)

Wear resistance of steels under conditions of dry sliding friction and electric current of high density; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
Izdano: (2014)

Wear of Composites Based on Bearing Steel under Action of Electric Current at Boundary Friction against Copper under Different Pressures; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
od: Aleutdinova M. I.
Izdano: (2018)

Multiscaling of lattice curvature on friction surfaces of metallic materials as a basis of their wear mechanism; Physical Mesomechanics; Vol. 20, iss. 1
Izdano: (2017)

Microstructure modification of 2024 aluminum alloy produced by friction drilling; Materials Science and Engineering: A; Vol. 691
Izdano: (2017)

On the possibility of frictional damping with reduced wear: A note on the applicability of archards law of adhesive wear under conditions of fretting; Physical Mesomechanics; Vol. 21, iss. 1
od: Li Qiang
Izdano: (2018)

Friction and wear behavior of polydicyclopentadiene under dry sliding and boundary lubrication; Petroleum and Coal; Vol. 58, iss. 5
Izdano: (2016)

Wear of ceramic and ceramic–metal composites in high-speed dry sliding over steel; Powder Metallurgy and Metal Ceramics; Vol. 48, iss. 1-2
od: Kulkov S. N. Sergey Nikolaevich
Izdano: (2009)

Friction welding; Неразрушающий контроль; Т. 3
od: Nikiforov D. S.
Izdano: ()

Regularities of evolution of surface structures in friction at high load; Journal of Friction and Wear; Vol. 19, iss. 3
od: Kolubaev A. V. Aleksander Viktorovich
Izdano: (1998)

Regularities of the formation and the role of secondary structures in the improvement of the wear resistance of commercially pure titanium VT1-0; Journal of Friction and Wear; Vol. 33, iss. 3
Izdano: (2012)

Wear and friction of transformation-toughened CMC and MMC; Wear; Vol. 249, iss. 10-11
Izdano: (2001)

Structural State of a Weld Formed in Aluminum Alloy by Friction Stir Welding and Treated by Ultrasound; Russian Physics Journal; Vol. 59, iss. 7
Izdano: (2016)

Ultrasonic-assisted friction stir welding on 7075 aluminum alloy; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
Izdano: (2015)

Mesoscopic nature of friction and numerical simulation methods in tribology; Physical Mesomechanics; Vol. 15, iss. 5
od: Psakhie S. G. Sergey Grigorievich
Izdano: (2012)

The Effect of Cu–Mo–S Coatings on Wear Resistance of Copper Friction Pair; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
Izdano: (2016)

Friction stir processing on high carbon steel U12; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
od: Tarasov S. Yu. Sergei Yulievich
Izdano: (2015)

Structure and wear resistance of electron-beam nitrous coatings; Journal of Friction and Wear; Vol. 33, iss. 5
Izdano: (2012)

Friction Stir Processing on High Carbon Steel U12; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
od: Tarasov S. Yu. Sergei Yulievich
Izdano: (2015)

Diffusion-controlled wear of steel friction stir welding tools used on aluminum alloys; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
Izdano: (2015)

Formation of surface layer with nanosize grain-subgrain structure due to friction of a copper - tool steel pair; Metal Science and Heat Treatment; Vol. 52, iss. 3-4
od: Tarasov S. Yu. Sergei Yulievich
Izdano: (2010)

Simulation of Friction Wear of Polymer Composite Materials; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Izdano: (2018)

Critical velocity of controllability of sliding friction by normal oscillations in viscoelastic contacts; Facta Universitatis. Series: Mechanical Engineering; Vol. 14, iss. 3
od: Popov M. Mikhail
Izdano: (2016)

Infrared Thermography Inspection of Severe Friction on UFG Stainless Steel, Copper and Aluminum Alloy; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
od: Filippov A. V.
Izdano: (2019)

Wear Resistance of Friction Pair of Metal Composite/Copper under Electric Current; IOP Conference Series: Materials Science and Engineering; Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science
Izdano: (2016)

The effect of friction stir welding tool wear on the weld quality of aluminum alloy AMg5M; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
od: Tarasov S. Yu. Sergei Yulievich
Izdano: (2014)

Adaptation and self-healing effect of tribo-oxidizing in high-speed sliding friction on ZrB2-SiC ceramic composite; Wear; Vol. 446-447
Izdano: (2020)

Tensile strength on friction stir processed AMG5 (5083) aluminum alloy; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
Izdano: (2016)

Increasing Wear Resistance of UHMWPE by Loading Enforcing Carbon Fibers: Effect of Irreversible and Elastic Deformation, Friction Heating, and Filler Size; Materials; Vol. 13 iss. 2
Izdano: (2020)