Burning Properties of Slurry Based on Coal and Oil Processing Waste
| Parent link: | Energy and Fuels Vol. 30, iss. 4.— 2016.— [P. 3441-3450] |
|---|---|
| Korporacja: | |
| Kolejni autorzy: | , , , |
| Streszczenie: | Title screen The main physicochemical coefficients of the components and of the tested coal–water slurry containing petrochemicals (CWSP) have been collected. The viscosity, mixture stability, density, ash content, humidity, flash and ignition temperatures, and enthalpy of combustion of the tested CWSP are reported. The temperatures of combustion of fuel compositions with different concentrations of solid and liquid components have been measured, as well as the important parameters: the ignition time delays of droplets (radius 0.25–2.5 mm) and the times required to reach their complete burning. The study allows determination of the optimal fuel compositions yielding the shortest ignition time delays, the longest times to complete burning, the highest temperatures of combustion, and the maximum enthalpy of combustion. It is found that the viscosity of CWSP is dependent almost proportionally on the moisture content of components. It is shown that the calorific value of CWSP is dependent proportionally on the calorific value of components. It is revealed that the ignition delay times of CWSP are dependent significantly on the degree of coal metamorphism and the volatiles content, as well as on the heat of vaporization and the boiling point of added flammable liquids. Important experimental data are obtained, which allow prediction of the CWSP composition with the desired properties of components, for which the following characteristics are known: calorific value, moisture content, ash content, volatile content, heat of vaporization, boiling point, and other characteristics considered. Режим доступа: по договору с организацией-держателем ресурса |
| Język: | angielski |
| Wydane: |
2016
|
| Hasła przedmiotowe: | |
| Dostęp online: | http://dx.doi.org/10.1021/acs.energyfuels.5b02881 |
| Format: | Elektroniczne Rozdział |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=648713 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 648713 | ||
| 005 | 20250224154750.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\13872 | ||
| 090 | |a 648713 | ||
| 100 | |a 20160531d2016 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Burning Properties of Slurry Based on Coal and Oil Processing Waste |f D. O. Glushkov [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 330 | |a The main physicochemical coefficients of the components and of the tested coal–water slurry containing petrochemicals (CWSP) have been collected. The viscosity, mixture stability, density, ash content, humidity, flash and ignition temperatures, and enthalpy of combustion of the tested CWSP are reported. The temperatures of combustion of fuel compositions with different concentrations of solid and liquid components have been measured, as well as the important parameters: the ignition time delays of droplets (radius 0.25–2.5 mm) and the times required to reach their complete burning. The study allows determination of the optimal fuel compositions yielding the shortest ignition time delays, the longest times to complete burning, the highest temperatures of combustion, and the maximum enthalpy of combustion. It is found that the viscosity of CWSP is dependent almost proportionally on the moisture content of components. It is shown that the calorific value of CWSP is dependent proportionally on the calorific value of components. It is revealed that the ignition delay times of CWSP are dependent significantly on the degree of coal metamorphism and the volatiles content, as well as on the heat of vaporization and the boiling point of added flammable liquids. Important experimental data are obtained, which allow prediction of the CWSP composition with the desired properties of components, for which the following characteristics are known: calorific value, moisture content, ash content, volatile content, heat of vaporization, boiling point, and other characteristics considered. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | |t Energy and Fuels | ||
| 463 | |t Vol. 30, iss. 4 |v [P. 3441-3450] |d 2016 | ||
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a электронный ресурс | |
| 701 | 1 | |a Glushkov |b D. O. |c specialist in the field of power engineering |c Professor, Director of the ISHFVP of the Tomsk Polytechnic University, Doctor of Technical Sciences |f 1988- |g Dmitry Olegovich |3 (RuTPU)RU\TPU\pers\32471 |9 16419 | |
| 701 | 1 | |a Lyrshchikov |b S. Yu. |c chemist |c senior researcher of Tomsk Polytechnic University, candidate of chemical sciences |f 1980- |g Sergey Yurievich |3 (RuTPU)RU\TPU\pers\36441 |9 19495 | |
| 701 | 1 | |a Shevyrev |b S. A. |c specialist in the field of heat and power engineering |c researcher of Tomsk Polytechnic University, candidate of technical sciences |f 1987- |g Sergey Aleksandrovich |3 (RuTPU)RU\TPU\pers\36042 |9 19179 | |
| 701 | 1 | |a Strizhak |b P. A. |c Specialist in the field of heat power energy |c Doctor of Physical and Mathematical Sciences (DSc), Professor of Tomsk Polytechnic University (TPU) |f 1985- |g Pavel Alexandrovich |3 (RuTPU)RU\TPU\pers\30871 |9 15117 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Энергетический институт |b Кафедра автоматизации теплоэнергетических процессов |3 (RuTPU)RU\TPU\col\18678 |9 27131 |
| 801 | 2 | |a RU |b 63413507 |c 20170413 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1021/acs.energyfuels.5b02881 | |
| 942 | |c CF | ||