Properties of Foam Glass Material Modified by Nanosize Zirconium Dioxide

Chi tiết về thư mục
Parent link:Glass and Ceramics
Vol. 73, iss. 1.— 2016.— [P. 39-42]
Nhiều tác giả của công ty: Национальный исследовательский Томский политехнический университет Институт физики высоких технологий Кафедра технологии силикатов и наноматериалов, Национальный исследовательский Томский политехнический университет Институт кибернетики Кафедра автоматики и компьютерных систем
Tác giả khác: Kazmina O. V. Olga Viktorovna, Semukhin B. S. Boris Semenovich, Votinov A. V. Aleksandr Valerjevich, Kazmin V. P. Viktor Pavlovich
Tóm tắt:Title screen
The effect of small additions of zirconium concentrate with average particle size 30 nm on the physical and mechanical properties of foam glass is examined. It is found that the introduction of zirconium dioxide into the foaming mixture changes the macrostructure of foam glass and increases the average pore size to 2.5 mm. Nanosize ZrO2 decreases the viscosity of melt upon foaming. The optimal weight content of zirconium dioxide from the standpoint of mechanical properties is 0.3 wt.%. The strength of foam glass increases in the presence of nanosize particles to 1.4 MPa compared with the strength of the initial material 1.1 MPa. Subsequent increase of the zirconium dioxide content to 1.1 wt.% decreases the strength to 0.5 MPa.
Режим доступа: по договору с организацией-держателем ресурса
Được phát hành: 2016
Những chủ đề:
Truy cập trực tuyến:http://dx.doi.org/10.1007/s10717-016-9821-z
Định dạng: Điện tử Chương của sách
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=648546
Miêu tả
Tóm tắt:Title screen
The effect of small additions of zirconium concentrate with average particle size 30 nm on the physical and mechanical properties of foam glass is examined. It is found that the introduction of zirconium dioxide into the foaming mixture changes the macrostructure of foam glass and increases the average pore size to 2.5 mm. Nanosize ZrO2 decreases the viscosity of melt upon foaming. The optimal weight content of zirconium dioxide from the standpoint of mechanical properties is 0.3 wt.%. The strength of foam glass increases in the presence of nanosize particles to 1.4 MPa compared with the strength of the initial material 1.1 MPa. Subsequent increase of the zirconium dioxide content to 1.1 wt.% decreases the strength to 0.5 MPa.
Режим доступа: по договору с организацией-держателем ресурса
DOI:10.1007/s10717-016-9821-z