Modification of Structural Phase State and Mechanical Properties of Poly-Grained Titanium Alloy Implanted by Aluminum Ions; IOP Conference Series: Materials Science and Engineering; Vol. 112 : Fundamental Aspects of Rare-earth Elements Mining and Separation and Modern Materials Engineering (REES-2015)

Detalles Bibliográficos
Parent link:	IOP Conference Series: Materials Science and Engineering Vol. 112 : Fundamental Aspects of Rare-earth Elements Mining and Separation and Modern Materials Engineering (REES-2015).— 2016.— [012032, 6 p.]
Autor Corporativo:	Томский политехнический университет
Outros autores:	Nikonenko A. V., Popova N. A., Nikonenko E. L. Elena Leonidovna, Kalashnikov M. P. Mark Petrovich, Kurzina A.
Summary:	Title screen The paper presents TEM analysis of microstructure, phase composition, and mechanical properties of commercially pure titanium. These properties of two types of grains are compared before and after modification of titanium by aluminum ions, namely: large grains (1.4 μm) and small (0.5 μm) grains. The analysis shows that ion implantation results in a considerable improvement of mechanical properties of both large and small grains throughout their implantation depth. However, with increase of the grain size, the stress in the ion- modified surface layer decreases while in the subsurface layer it increases. Режим доступа: по договору с организацией-держателем ресурса
Idioma:	inglés
Publicado:	2016
Subjects:	электронный ресурс труды учёных ТПУ модификации структурно-фазовые состояния механические свойства титановые сплавы ионы алюминия ПЭМ микроструктуры фазовый состав ионная имплантация поверхностные слои
Acceso en liña:	http://dx.doi.org/10.1088/1757-899X/112/1/012032
Formato:	Electrónico Capítulo de libro
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=648411

Descripción
Summary:	Title screen The paper presents TEM analysis of microstructure, phase composition, and mechanical properties of commercially pure titanium. These properties of two types of grains are compared before and after modification of titanium by aluminum ions, namely: large grains (1.4 μm) and small (0.5 μm) grains. The analysis shows that ion implantation results in a considerable improvement of mechanical properties of both large and small grains throughout their implantation depth. However, with increase of the grain size, the stress in the ion- modified surface layer decreases while in the subsurface layer it increases. Режим доступа: по договору с организацией-держателем ресурса
DOI:	10.1088/1757-899X/112/1/012032

Títulos similares