Structure and phase composition of Nb/Ti system subjected to compression plasma flow impact; Surface and Coatings Technology; Vol. 278

Structure and phase composition of Nb/Ti system subjected to compression plasma flow impact; Surface and Coatings Technology; Vol. 278

書目詳細資料
Parent link:	Surface and Coatings Technology: Scientific Journal.— , 1986- Vol. 278.— 2015.— [P. 183–189]
企業作者:	Национальный исследовательский Томский политехнический университет Институт физики высоких технологий Лаборатория № 1
其他作者:	Shimanskii (Shymanski) V. I. Vitali Igorevich, Cherenda N. N. Nikolay Nikolaevich, Uglov V. V. Vladimir Vasilievich, Astashinski V. M. Valentin Mironovich, Kuzmitski A. M. Anton Mikhaylovich
總結:	Title screen The results of structure, phase composition and mechanical properties of titanium alloyed with niobium atoms by means of compression plasma flow (CPF) impact on the “Nb coating (2.5 ?m)/Ti substrate” system are presented. The CPF treatment with the pulse duration of 100 ?s was carried out at the absorbed energy density of 13 J/cm2 which is sufficient for melting of both niobium coating and some part of titanium substrate. The cross-section analysis by means of scanning electron microscopy revealed the formation of the alloyed layer with the thickness of 14 ?m and relatively uniform distribution of Nb along the depth (Nb concentration obtained by means of the EDX analysis was about 17 at.%). Alloying of titanium with Nb atoms resulted in stabilization of a high-temperature ?-Ti phase as a ?-Ti(Nb) solid solution. In the near surface layer the niobium interacted with impurity atoms (N and C) providing carbonitride (Nb(C,N) and carbide and Nb2C) possible formation. Phase transformation in the surface layer of titanium led to microhardness increase up to 4.7 GPa. Режим доступа: по договору с организацией-держателем ресурса
語言:	英语
出版:	2015
主題:	электронный ресурс труды учёных ТПУ титан ниобий легирование фазовый состав состав морфология поверхности микротвердость сжатие потоки плазмы
在線閱讀:	http://dx.doi.org/10.1016/j.surfcoat.2015.08.014
格式:	電子 Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=648393

相似書籍

Surface nitriding and alloying of steels with Ti and Nb atoms by compression plasma flows treatment; Vacuum; Vol. 129
出版: (2016)

Modification of Ti-6Al-4V alloy element and phase composition by compression plasma flows impact; Surface and Coatings Technology; Vol. 355
出版: (2018)

Structure of Austenitic Steel Surface Layer Subjected to Compression Plasma Flows Impact; Surface Modification of Materials by Ion Beams (SMMIB-2019)
出版: (2019)

Phase Composition and Mechanical Properties Modification in Cr/Ti System by Short-Pulsed High Intensity Ion Beams Treatment; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
出版: (2015)

Structure and phase composition of tungsten alloys modified by compression plasma flows and high-intense pulsed ion beam impacts; Applied Surface Science; Vol. 491
出版: (2019)

Improving the Mechanical Properties of SiC-ceramics by means of Vacuum Electron-ion-plasma Alloying with Titanium; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
出版: (2020)

Phase Composition and Microstructure of Ti-Nb Alloy Produced by Selective Laser Melting; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
出版: (2016)

Исследование влияния продолжительности механической активации на структуру и свойства механокомпозитов на основе системы Nb-Al; Современные техника и технологии; Т. 2
由: Денисов К. И.
出版: (2010)

Research of Structure and Properties of NiCrSiB Sintered Materials Additionally Alloyed with Nb; Materials Performance and Characterization; Vol. 7, № 3
出版: (2018)

Исследование строения порошкового сплава Ti-40Nb, полученного механической активацией; Обработка металлов (технология, оборудование, инструменты); № 4 (73)
出版: (2016)

The Influence of Dimesions and Phase State of Structural Elements on Mechanical Properties of Binary Alloys of the Ti–Nb and Zr–Nb Systems; Russian Physics Journal; Vol. 61, iss. 10
出版: (2019)

Investigation of the Influence of Ti-Nb Alloy Composition on the Structure of the Ingots Produced by Arc Melting; Advanced Materials Research; Vol. 1085 : Prospects of Fundamental Sciences Development (PFSD-2014)
出版: (2015)

Исследование строения и фазового состава порошков Ti и Nb после механической активации; Обработка металлов (технология, оборудование, инструменты); № 1 (70)
出版: (2016)

Optimization of aluminumand its alloys doping by ionic-beamplasmacoating; IOP Conference Series: Materials Science and Engineering; Vol. 124 : Mechanical Engineering, Automation and Control Systems (MEACS2015)
出版: (2016)

The investigation of the influence of formation conditions on the structure of Ti-40Nb alloy; AIP Conference Proceedings; Vol. 1772 : Prospects of Fundamental Sciences Development (PFSD-2016)
出版: (2016)

Structure, phase composition and mechanical properties of hard alloy treated by intense pulsed electron beams; Surface and Coatings Technology; Vol. 206, iss. 1-12
出版: (2012)

Regularities of Structure and Phase Composition Formation of Surface Layer of Silumin Subjected to Electron-Beam Treatment; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
出版: (2016)

Thermal Stability of Structure and Properties of the Surface Layer of Instrumental Steel Alloyed with Zirconium and Silicon Atoms under the Action of Compression Plasma Flows; Inorganic Materials: Applied Research; Vol. 9, iss. 5
出版: (2018)

Microstructure and Phase Composition of 3D-Printed Titanium Alloy Ti-6Al-4V Parts Subjected to Thermal Post-Processing; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
出版: (2018)

Influence of Arc Welding Power Supply on Structural Phase Composition of X12CrNiTi 18-9 (DIN) Weld; Applied Mechanics and Materials; Vol. 770 : Urgent Problems of Up-to-Date Mechanical Engineering
出版: (2015)

The use of low-temperature plasma in a combined technology for the formation of wear-resistant boron-containing coatings; Surface and Coatings Technology; Vol. 389
出版: (2020)

Микроструктура и механические свойства бинарных сплавов Ti-45 мас.% Nb и Zr-1 мас.% Nb с различным размером структурных элементов; Иерархические материалы: разработка и приложения для новых технологий и надежных конструкций
出版: (2018)

Микроструктура ультрамелкозернистого сплава Ti-40мас.%Nb после отжигов; Письма о материалах; Т. 10, № 1
出版: (2018)

The effect of rolling on phase composition and microhardness of austenitic steels with different stacking-fault energies; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
出版: (2017)

Effect of age hardening on phase composition and microhardness of v-free and v-alloyed high-nitrogen austenitic steels; Иерархические материалы: разработка и приложения для новых технологий и надежных конструкций
出版: (2018)

Effect of Age Hardening on Phase Composition and Microhardness of V-Free and V-Alloyed High-Nitrogen Austenitic Steels; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
出版: (2018)

Ниобий. Физические свойства; ГСССД 121-88
出版: (Москва, Изд-во стандартов, 1989)

Коррозия и защита металлов: сборник статей
出版: (Москва, Наука, 1970)

Effect of Rolling on Phase Composition and Microhardness of Austenitic Steels with Different Stacking-Fault Energies; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
出版: (2017)

Исследование структуры и свойств покрытий, полученных при наплавке самофлюсующегося Ni-Cr-Si-B порошка, легированного ниобием в сочетании с бором и углеродом; Современные технологии и материалы новых поколений
出版: (2017)

Получение нанокомпозитных покрытий на основе системы Ti-Al-Si-N с помощью двух магнетронов; Известия Томского политехнического университета [Известия ТПУ]; Т. 315, № 2: Математика и механика. Физика
出版: (2009)

Phase Composition of Heat-Resisting Alloy Modified by Ageing and Alloyed by Rhenium; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
出版: (2016)

Пластичность и хрупкость полупроводниковых материалов при испытаниях на микротвердость
由: Вальковская М. И. Маргарита Ивановна
出版: (Кишинев, Штиинца, 1984)

Влияние легирования водородом на структуру и микротвердость высокоазотистой стали, деформированной методом кручения под высоким давлением; Перспективы развития фундаментальных наук; Т. 1 : Физика
由: Майер Г. Г. Галина Геннадьевна
出版: (2018)

Effect of Pulsed Electron Beam Irradiation on Microstructure of TiC/Ti6Al4V Composites Fabricated by Laser Metal Deposition; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
由: Sinyakova E. A.
出版: (2019)

Surface modification of selective laser melted Ti-6Al-4V parts by ultrasonic impact treatment and electron beam irradiation; Иерархические материалы: разработка и приложения для новых технологий и надежных конструкций
由: Sinyakova E. A.
出版: (2019)

Surface modification of selective laser melted Ti-6Al-4V by ultrasonic impact treatment and electron beam irradiation; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
由: Sinyakova E. A.
出版: (2019)

Multilevel Hierarchical Structure of Silumin Subjected to Multicycle Surface Alloying; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
出版: (2019)

Structure and optical-mechanical properties of the Zr-Y-O coatings deposited by pulse magnetron sputtering on optical glass; IOP Conference Series: Materials Science and Engineering; Vol. 511 : Perspective Materials of Constructional and Medical Purpose
出版: (2019)

Структурно-фазовый анализ поверхностного слоя стали, подвергнутой электровзрывному легированию медью и последующей электронно-пучковой обработке; Известия Томского политехнического университета [Известия ТПУ]; Т. 318, № 2 : Математика и механика. Физика
出版: (2011)