Research on Operational Characteristics of Imported Rails under Conditions of East Siberian Railway
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 127 : Urgent Problems of Modern Mechanical Engineering.— 2016.— [012037, 8 p.] |
|---|---|
| מחבר תאגידי: | |
| מחברים אחרים: | , , , , |
| סיכום: | Title screen In world's manufacturing of railroad rails there are several thermal bonding methods: differentiated waterflow quenching, air-blast or spray quenching, rail head's hardening in polymer solution and bulk oil hardening; rails' service durability is strongly dependent on thermo-hardening methods. Until recently, all of rails, produced at Nizhniy Tagil and Kuznetsk Metallurgical Works, were subjected to bulk oil hardening. Only in 2010-2011, in the Russian Federation, differentiated air quenching of rails was started at the JSC "EVRAZ ZSMK"; and rail heads' hardening in polymer solution - at the JSC "Mechel". At the same time, exploitation of imported rails with differentiated hardening has been performed on Russian railways since 1995. Service durability of these rails in Siberia and the Far North is of considerable interest. In this paper we investigated the quality of P65-type rails, made in Japan, removed after use from curved track section of the East-Siberian railway. Режим доступа: по договору с организацией-держателем ресурса |
| שפה: | אנגלית |
| יצא לאור: |
2016
|
| נושאים: | |
| גישה מקוונת: | http://dx.doi.org/10.1088/1757-899X/127/1/012037 http://earchive.tpu.ru/handle/11683/34896 |
| פורמט: | אלקטרוני Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=648255 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 648255 | ||
| 005 | 20231102025555.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\13412 | ||
| 035 | |a RU\TPU\network\13411 | ||
| 090 | |a 648255 | ||
| 100 | |a 20160516a2016 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 105 | |a y z 100zy | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Research on Operational Characteristics of Imported Rails under Conditions of East Siberian Railway |f R. A. Gizatulin [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 8 tit.] | ||
| 330 | |a In world's manufacturing of railroad rails there are several thermal bonding methods: differentiated waterflow quenching, air-blast or spray quenching, rail head's hardening in polymer solution and bulk oil hardening; rails' service durability is strongly dependent on thermo-hardening methods. Until recently, all of rails, produced at Nizhniy Tagil and Kuznetsk Metallurgical Works, were subjected to bulk oil hardening. Only in 2010-2011, in the Russian Federation, differentiated air quenching of rails was started at the JSC "EVRAZ ZSMK"; and rail heads' hardening in polymer solution - at the JSC "Mechel". At the same time, exploitation of imported rails with differentiated hardening has been performed on Russian railways since 1995. Service durability of these rails in Siberia and the Far North is of considerable interest. In this paper we investigated the quality of P65-type rails, made in Japan, removed after use from curved track section of the East-Siberian railway. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\2008 |t IOP Conference Series: Materials Science and Engineering | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\13274 |t Vol. 127 : Urgent Problems of Modern Mechanical Engineering |o International Scientific and Practical Conference, 17–18 December 2015, Yurga, Russia |o [proceedings] |v [012037, 8 p.] |d 2016 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a эксплуатационные характеристики | |
| 610 | 1 | |a обрабатывающая промышленность | |
| 610 | 1 | |a железнодорожные рельсы | |
| 610 | 1 | |a термоупрочнение | |
| 610 | 1 | |a закалка | |
| 701 | 1 | |a Gizatulin |b R. A. |c specialist in the field of metal working |c Professor of Yurga technological Institute of Tomsk Polytechnic University, Doctor of technical sciences |f 1957- |g Rinat Akramovich |2 stltpush |3 (RuTPU)RU\TPU\pers\32896 |9 16744 | |
| 701 | 1 | |a Kozyrev |b N. A. | |
| 701 | 1 | |a Valuev |b D. V. |c specialist in the field of metal working |c Associate Professor of Yurga technological Institute of Tomsk Polytechnic University, Candidate of technical sciences |f 1980- |g Denis Viktorovich |2 stltpush |3 (RuTPU)RU\TPU\pers\32900 |9 16748 | |
| 701 | 1 | |a Valueva |b A. V. |c Specialist in the field of higher professional education |c specialist on educational and methodical work of Yurga technological Institute of Tomsk Polytechnic University |f 1981- |g Anna Vladimirovna |2 stltpush |3 (RuTPU)RU\TPU\pers\32902 |9 16750 | |
| 701 | 1 | |a Serikbol |b A. | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Юргинский технологический институт (филиал) (ЮТИ) |b Кафедра металлургии и черных металлов (МЧМ) |h 7136 |2 stltpush |3 (RuTPU)RU\TPU\col\18892 |
| 801 | 2 | |a RU |b 63413507 |c 20161207 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1088/1757-899X/127/1/012037 | |
| 856 | 4 | |u http://earchive.tpu.ru/handle/11683/34896 | |
| 942 | |c CF | ||