Parametric Modeling as a Technology of Rapid Prototyping in Light Industry
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 127 : Urgent Problems of Modern Mechanical Engineering.— 2016.— [012028, 6 p.] |
|---|---|
| Korporativní autor: | |
| Další autoři: | , , , |
| Shrnutí: | Title screen The paper deals with the parametric modeling method of virtual mannequins for the purposes of design automation in clothing industry. The described approach includes the steps of generation of the basic model on the ground of the initial one (obtained in 3D-scanning process), its parameterization and deformation. The complex surfaces are presented by the wireframe model. The modeling results are evaluated with the set of similarity factors. Deformed models are compared with their virtual prototypes. The results of modeling are estimated by the standard deviation factor. Режим доступа: по договору с организацией-держателем ресурса |
| Jazyk: | angličtina |
| Vydáno: |
2016
|
| Témata: | |
| On-line přístup: | http://dx.doi.org/10.1088/1757-899X/127/1/012028 http://earchive.tpu.ru/handle/11683/34886 |
| Médium: | Elektronický zdroj Kapitola |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=648232 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 648232 | ||
| 005 | 20231102025554.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\13389 | ||
| 035 | |a RU\TPU\network\13388 | ||
| 090 | |a 648232 | ||
| 100 | |a 20160513a2016 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 105 | |a y z 100zy | ||
| 135 | |a drgn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Parametric Modeling as a Technology of Rapid Prototyping in Light Industry |f I. N. Tomilov [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 8 tit.] | ||
| 330 | |a The paper deals with the parametric modeling method of virtual mannequins for the purposes of design automation in clothing industry. The described approach includes the steps of generation of the basic model on the ground of the initial one (obtained in 3D-scanning process), its parameterization and deformation. The complex surfaces are presented by the wireframe model. The modeling results are evaluated with the set of similarity factors. Deformed models are compared with their virtual prototypes. The results of modeling are estimated by the standard deviation factor. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\2008 |t IOP Conference Series: Materials Science and Engineering | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\13274 |t Vol. 127 : Urgent Problems of Modern Mechanical Engineering |o International Scientific and Practical Conference, 17–18 December 2015, Yurga, Russia |o [proceedings] |v [012028, 6 p.] |d 2016 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a параметрическое моделирование | |
| 610 | 1 | |a прототипирование | |
| 610 | 1 | |a легкая промышленность | |
| 610 | 1 | |a автоматизация | |
| 610 | 1 | |a швейная промышленность | |
| 610 | 1 | |a манекены | |
| 610 | 1 | |a моделирование | |
| 701 | 1 | |a Tomilov |b I. N. |c specialist in the field of Informatics and computer engineering |c associate Professor, Yurga technological Institute of Tomsk Polytechnic University, candidate of technical Sciences |f 1983- |g Ivan Nikolaevich |2 stltpush |3 (RuTPU)RU\TPU\pers\36482 |9 19531 | |
| 701 | 1 | |a Grudinin |b S. N. | |
| 701 | 1 | |a Frolovsky |b V. D. | |
| 701 | 1 | |a Alexandrov |b A. A. | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Юргинский технологический институт (филиал) (ЮТИ) |b Кафедра информационных систем (ИС) |h 1492 |2 stltpush |3 (RuTPU)RU\TPU\col\18893 |
| 801 | 2 | |a RU |b 63413507 |c 20161207 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1088/1757-899X/127/1/012028 | |
| 856 | 4 | |u http://earchive.tpu.ru/handle/11683/34886 | |
| 942 | |c CF | ||