Methods to Predict Stresses in Cutting Inserts Brazed Using Iron-Carbon Brazing Alloy
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 125 : Materials Treatment: Current Problems and Solutions.— 2016.— [012026, 6 p.] |
|---|---|
| Autor kompanije: | |
| Daljnji autori: | , , , |
| Sažetak: | Title screen This work describes a method for predicting residual and operating stresses in a flat-form tool insert made of tungsten free carbides brazed using iron-carbon alloy. According to the studies' results it is concluded that the recommendations relating to the limitation of a melting point of tool brazing alloys (950-1100°С according to different data) are connected with a negative impact on tools as a composite made of dissimilar materials rather than on hard alloys as a tool material. Due to the cooling process stresses inevitably occur in the brazed joint of dissimilar materials, and these stresses increase with the higher solidification temperature of the brazing alloy. Режим доступа: по договору с организацией-держателем ресурса |
| Jezik: | engleski |
| Izdano: |
2016
|
| Teme: | |
| Online pristup: | http://dx.doi.org/10.1088/1757-899X/125/1/012026 http://earchive.tpu.ru/handle/11683/33915 |
| Format: | Elektronički Poglavlje knjige |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=648149 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 648149 | ||
| 005 | 20231102025550.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\13306 | ||
| 035 | |a RU\TPU\network\13300 | ||
| 090 | |a 648149 | ||
| 100 | |a 20160512a2016 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 105 | |a y z 100zy | ||
| 135 | |a drgn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Methods to Predict Stresses in Cutting Inserts Brazed Using Iron-Carbon Brazing Alloy |f V. V. Konovodov [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 10 tit.] | ||
| 330 | |a This work describes a method for predicting residual and operating stresses in a flat-form tool insert made of tungsten free carbides brazed using iron-carbon alloy. According to the studies' results it is concluded that the recommendations relating to the limitation of a melting point of tool brazing alloys (950-1100°С according to different data) are connected with a negative impact on tools as a composite made of dissimilar materials rather than on hard alloys as a tool material. Due to the cooling process stresses inevitably occur in the brazed joint of dissimilar materials, and these stresses increase with the higher solidification temperature of the brazing alloy. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\2008 |t IOP Conference Series: Materials Science and Engineering | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\13251 |t Vol. 125 : Materials Treatment: Current Problems and Solutions |o All-Russia Scientific and Practical Conference, 26–28 November 2015, Yurga, Russia |o [proceedings] |v [012026, 6 p.] |d 2016 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a прогнозирование | |
| 610 | 1 | |a напряжения | |
| 610 | 1 | |a режущие пластины | |
| 610 | 1 | |a железоуглеродистые припои | |
| 610 | 1 | |a сплавы | |
| 610 | 1 | |a композиционные материалы | |
| 610 | 1 | |a твердые сплавы | |
| 610 | 1 | |a припои | |
| 701 | 1 | |a Konovodov |b V. V. | |
| 701 | 1 | |a Valentov |b A. V. |c specialist of agroengineering |c senior lecturer of Yurga technological Institute of Tomsk Polytechnic University |f 1979- |g Aleksandr Viktorovich |2 stltpush |3 (RuTPU)RU\TPU\pers\35625 |9 18794 | |
| 701 | 1 | |a Retyunsky |b O. Yu. |c specialist in the field of mechanical engineering |c Associate Professor, Head of Department of Yurga technological Institute of Tomsk Polytechnic University, candidate of technical sciences |f 1969- |g Oleg Yurievich |2 stltpush |3 (RuTPU)RU\TPU\pers\34744 |9 18094 | |
| 701 | 1 | |a Esekuev |b Sh. B. | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Юргинский технологический институт (филиал) (ЮТИ) |b Кафедра агроинженерии (АИ) |h 1490 |2 stltpush |3 (RuTPU)RU\TPU\col\19136 |
| 801 | 2 | |a RU |b 63413507 |c 20161125 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1088/1757-899X/125/1/012026 | |
| 856 | 4 | |u http://earchive.tpu.ru/handle/11683/33915 | |
| 942 | |c CF | ||