Cutting Edge Geometry Effect on Plastic Deformation of Titanium Alloy
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 125 : Materials Treatment: Current Problems and Solutions.— 2016.— [012012, 6 p.] |
|---|---|
| Corporate Authors: | , |
| Drugi avtorji: | , , , |
| Izvleček: | Title screen The paper presents experimental studies of ОТ4 titanium alloy machining with cutting edges of various geometry parameters. Experiments were performed at a low speed by the scheme of free cutting. Intensity of plastic shear strain was set for defining of cutting edge geometry effect on machining. Images of chip formed are shown. Estimation of strain magnitude was accomplished with digital image correlation method. Effect of rake angle and cutting edge angle has been studied. Depth of deformed layer and the area of the plastic strain is determine. Results showed that increasing the angle of the cutting edge inclination results in a change the mechanism of chip formation. Режим доступа: по договору с организацией-держателем ресурса |
| Jezik: | angleščina |
| Izdano: |
2016
|
| Teme: | |
| Online dostop: | http://dx.doi.org/10.1088/1757-899X/125/1/012012 http://earchive.tpu.ru/handle/11683/33935 |
| Format: | Elektronski Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=648135 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 648135 | ||
| 005 | 20231102025550.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\13292 | ||
| 035 | |a RU\TPU\network\13291 | ||
| 090 | |a 648135 | ||
| 100 | |a 20160511a2016 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 105 | |a y z 100zy | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Cutting Edge Geometry Effect on Plastic Deformation of Titanium Alloy |f G. I. Korovin [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 13 tit.] | ||
| 330 | |a The paper presents experimental studies of ОТ4 titanium alloy machining with cutting edges of various geometry parameters. Experiments were performed at a low speed by the scheme of free cutting. Intensity of plastic shear strain was set for defining of cutting edge geometry effect on machining. Images of chip formed are shown. Estimation of strain magnitude was accomplished with digital image correlation method. Effect of rake angle and cutting edge angle has been studied. Depth of deformed layer and the area of the plastic strain is determine. Results showed that increasing the angle of the cutting edge inclination results in a change the mechanism of chip formation. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\2008 |t IOP Conference Series: Materials Science and Engineering | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\13251 |t Vol. 125 : Materials Treatment: Current Problems and Solutions |o All-Russia Scientific and Practical Conference, 26–28 November 2015, Yurga, Russia |o [proceedings] |v [012012, 6 p.] |d 2016 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a пластическая деформация | |
| 610 | 1 | |a титановые сплавы | |
| 610 | 1 | |a геометрические параметры | |
| 610 | 1 | |a деформации | |
| 610 | 1 | |a резание | |
| 610 | 1 | |a механическая обработка | |
| 701 | 1 | |a Korovin |b G. I. | |
| 701 | 1 | |a Filippov |b A. V. |c specialist in the field of mechanical engineering |c assistant of Yurga technological Institute of Tomsk Polytechnic University |f 1988- |g Andrey Vladimirovich |2 stltpush |3 (RuTPU)RU\TPU\pers\34612 |9 17974 | |
| 701 | 1 | |a Proskokov |b A. V. |c specialist in the field of mechanical engineering |c associate professor of Yurga technological Institute of Tomsk Polytechnic University, candidate of technical sciences |f 1977- |g Andrey Vladimirovich |2 stltpush |3 (RuTPU)RU\TPU\pers\34727 |9 18077 | |
| 701 | 1 | |a Gorbatenko |b V. V. |c chemist |c Associate Professor of Tomsk Polytechnic University, Candidate of Technical Sciences |f 1978- |g Victoria Valerievna |2 stltpush |3 (RuTPU)RU\TPU\pers\32596 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Юргинский технологический институт (филиал) (ЮТИ) |b Кафедра технологии машиностроения (ТМС) |h 356 |2 stltpush |3 (RuTPU)RU\TPU\col\18902 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Институт физики высоких технологий (ИФВТ) |b Кафедра общей химии и химической технологии (ОХХТ) |h 7617 |2 stltpush |3 (RuTPU)RU\TPU\col\21253 |
| 801 | 2 | |a RU |b 63413507 |c 20161125 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1088/1757-899X/125/1/012012 | |
| 856 | 4 | |u http://earchive.tpu.ru/handle/11683/33935 | |
| 942 | |c CF | ||