Forming Completely Penetrated Welded T-joints when Pulsed Arc Welding; IOP Conference Series: Materials Science and Engineering; Vol. 125 : Materials Treatment: Current Problems and Solutions
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 125 : Materials Treatment: Current Problems and Solutions.— 2016.— [012003, 7 p.] |
|---|---|
| Príomhchruthaitheoir: | |
| Údar corparáideach: | |
| Rannpháirtithe: | , |
| Achoimre: | Title screen The paper is focused on revealing the influence of welding parameters on weld formation when pulsed arc welding. As an experimental sample a T-joint over 10 mm was selected. Welding was carried out in flat position, which required no edge preparation but provided mono-directional guaranteed root penetration. The following parameters of welding were subjected to investigation: gap in the joint, wire feed rate and incline angles of the torch along and across the weld axis. Technological recommendations have been made with respect to pulsed arc welding; the cost price of product manufacturing can be reduced on their basis due to reduction of labor input required by machining, lowering consumption of welding materials and electric power. Режим доступа: по договору с организацией-держателем ресурса |
| Teanga: | Béarla |
| Foilsithe / Cruthaithe: |
2016
|
| Ábhair: | |
| Rochtain ar líne: | http://dx.doi.org/10.1088/1757-899X/125/1/012003 http://earchive.tpu.ru/handle/11683/33918 |
| Formáid: | Leictreonach Caibidil leabhair |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=648106 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 648106 | ||
| 005 | 20231102025548.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\13263 | ||
| 035 | |a RU\TPU\network\13260 | ||
| 090 | |a 648106 | ||
| 100 | |a 20160510a2016 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 105 | |a y z 100zy | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Forming Completely Penetrated Welded T-joints when Pulsed Arc Welding |f N. Yu. Krampit, M. A. Krampit, A. S. Sapozhkov | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 13 tit.] | ||
| 330 | |a The paper is focused on revealing the influence of welding parameters on weld formation when pulsed arc welding. As an experimental sample a T-joint over 10 mm was selected. Welding was carried out in flat position, which required no edge preparation but provided mono-directional guaranteed root penetration. The following parameters of welding were subjected to investigation: gap in the joint, wire feed rate and incline angles of the torch along and across the weld axis. Technological recommendations have been made with respect to pulsed arc welding; the cost price of product manufacturing can be reduced on their basis due to reduction of labor input required by machining, lowering consumption of welding materials and electric power. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\2008 |t IOP Conference Series: Materials Science and Engineering | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\13251 |t Vol. 125 : Materials Treatment: Current Problems and Solutions |o All-Russia Scientific and Practical Conference, 26–28 November 2015, Yurga, Russia |o [proceedings] |v [012003, 7 p.] |d 2016 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a импульсно-дуговая сварка | |
| 610 | 1 | |a сварка | |
| 610 | 1 | |a сварные швы | |
| 610 | 1 | |a сварочные материалы | |
| 610 | 1 | |a затраты труда | |
| 610 | 1 | |a электроэнергия | |
| 700 | 1 | |a Krampit |b N. Yu. |c specialist in the field of welding production |c Associate Professor of Yurga technological Institute of Tomsk Polytechnic University, candidate of technical sciences |f 1969- |g Nataliya Yurievna |2 stltpush |3 (RuTPU)RU\TPU\pers\34723 |9 18073 | |
| 701 | 1 | |a Krampit |b M. A. |c specialist in the field of welding production |c assistant of Yurga technological Institute of Tomsk Polytechnic University |f 1990- |g Maksim Andreevich |2 stltpush |3 (RuTPU)RU\TPU\pers\34724 |9 18074 | |
| 701 | 1 | |a Sapozhkov |b A. S. | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Юргинский технологический институт (филиал) (ЮТИ) |b Кафедра сварочного производства (КСП) |h 355 |2 stltpush |3 (RuTPU)RU\TPU\col\18891 |
| 801 | 2 | |a RU |b 63413507 |c 20161125 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1088/1757-899X/125/1/012003 | |
| 856 | 4 | |u http://earchive.tpu.ru/handle/11683/33918 | |
| 942 | |c CF | ||