Grain size effect on yield strength of titanium alloy implanted with aluminum ions; AIP Conference Proceedings; Vol. 1698 : Advanced Materials in Technology and Construction, AMTC-2015

Grain size effect on yield strength of titanium alloy implanted with aluminum ions; AIP Conference Proceedings; Vol. 1698 : Advanced Materials in Technology and Construction, AMTC-2015

Bibliografiske detaljer
Parent link:	AIP Conference Proceedings Vol. 1698 : Advanced Materials in Technology and Construction, AMTC-2015.— 2016.— [050002 , 8 p.]
Institution som forfatter:	Национальный исследовательский Томский политехнический университет
Andre forfattere:	Popova N. A. Nataljya Anatoljevna, Nikonenko E. L. Elena Leonidovna, Yurjev I. Yu. Ivan Yurjevich, Kalashnikov M. P. Mark Petrovich, Kurzina I. A. Irina Aleksandrovna
Summary:	Title screen The paper presents a transmission electron microscopy (TEM) study of the microstructure and phase state of commercially pure titanium VT1-0 implanted by aluminum ions. This study has been carried out before and after the ion implantation for different grain size, i.e. 0.3?µm (ultra-fine grain condition), 1.5?µm (fine grain condition), and 17?µm (polycrystalline condition). This paper presents details of calculations and analysis of strength components of the yield stress. It is shown that the ion implantation results in a considerable hardening of the entire thickness of the implanted layer in the both grain types. The grain size has, however, a different effect on the yield stress. So, both before and after the ion implantation, the increase of the grain size leads to the decrease of the alloy hardening. Thus, hardening in ultra-fine and fine grain alloys increased by four times, while in polycrystalline alloy it increased by over six times. Режим доступа: по договору с организацией-держателем ресурса
Sprog:	engelsk
Udgivet:	2016
Fag:	электронный ресурс труды учёных ТПУ электронная микроскопия титан ионная имплантация текучесть
Online adgang:	http://dx.doi.org/10.1063/1.4937851
Format:	Electronisk Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=647755

Lignende værker

Grain shape and size and structural and phase conditions modified by aluminum ion implantation in UFG titanium; AIP Conference Proceedings; Vol. 1772 : Prospects of Fundamental Sciences Development (PFSD-2016)
Udgivet: (2016)

Influence of Implantation on the Grain Size and Structural-Phase State of UFG-Titanium; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Udgivet: (2019)

High-intensity low energy titanium ion implantation into zirconium alloy; Applied Surface Science; Vol. 439
Udgivet: (2018)

Pulsed plasma-immersion ion implantation of aluminum into VT1-0 titanium; Bulletin of the Russian Academy of Sciences: Physics; Vol. 80, iss. 2
Udgivet: (2016)

Ultra high fluence implantation of aluminum ions into CP–Ti; Journal of Alloys and Compounds; Vol. 793
Udgivet: (2019)

Effect of titanium ion implantation and deposition on hydrogenation behavior of Zr-1Nb alloy; Surface and Coatings Technology; Vol. 308
Udgivet: (2016)

Modification of Structural Phase State and Mechanical Properties of Poly-Grained Titanium Alloy Implanted by Aluminum Ions; IOP Conference Series: Materials Science and Engineering; Vol. 112 : Fundamental Aspects of Rare-earth Elements Mining and Separation and Modern Materials Engineering (REES-2015)
Udgivet: (2016)

The Effect of Thermal Annealing on Structural-phase Changes in the Ni–Ti Alloy Implanted with Krypton Ions; Russian Physics Journal; Vol. 59, iss. 2
af: Poltavtseva V. P. Valentina Petrovna
Udgivet: (2016)

Influence of plasma immersion titanium implantation on hydrogenation and mechanical properties of Zr–2.5Nb; Applied Surface Science; Vol. 370
Udgivet: (2016)

Microstructure of titanium alloy modified by high-intensity implantation of low- and high-energy aluminium ions; Surface and Coatings Technology; Vol. 391
Udgivet: (2020)

The research of influence of plasma immersion ion implantation of titanium on hydrogen sorption of Zr-2,5% Nb; Физико-технические проблемы в науке, промышленности и медицине
af: Sutygina A. N. Alina Nikolaevna
Udgivet: (2015)

Influence of titanium implantation on hydrogen sorption rate of zr-2.5nb; Перспективы развития фундаментальных наук; Т. 1 : Физика
af: Sutygina A. N. Alina Nikolaevna
Udgivet: (2016)

Study of the synergy effect of high-intensity aluminum ions implantation into titanium and energy impact on the surface; Materials. Technologies. Design; Т. 5, № 3 (13)
Udgivet: (2023)

Microstructure, defect structure and hydrogen trapping in zirconium alloy Zr-1Nb treated by plasma immersion Ti ion implantation and deposition; Journal of Alloys and Compounds; Vol. 732
Udgivet: (2018)

High Intensity Implantation of Aluminium Ions into Titanium; 7 International conference on modification of materials with particle beams and plasma flows
Udgivet: (2004)

Oxidation Behavior of Zr-1Nb Corroded in Air at 400 °C after Plasma Immersion Titanium Implantation; Metals; Vol. 8, iss. 1
Udgivet: (2018)

Hydrogen-Permeability of Titanium-Nitride (TiN) Coatings Obtained via the Plasma-Immersion Ion Implantation of Titanium and TiN Vacuum-Arc Deposition on Zr-1%Nb Alloy; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 12, iss. 4
Udgivet: (2018)

Plasma Immersion Ion Implantation for Surface Treatment of Complex Branched Structures; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Udgivet: (2016)

The Influence of High-Energy Krypton Ion Implantation Temperature on Structure and Properties of Ni–Ti Alloy; Russian Physics Journal; Vol. 61, iss. 11
af: Poltavtseva V. P. Valentina Petrovna
Udgivet: (2019)

High Intensity low Aluminum Ion Energy Implantation into Titanium; Ion Implantation Technology (IIT 2018)
Udgivet: (2018)

Influence of Plasma-Immersion Titanium-Ion Implantation on the Kinetics of Hydrogen Penetration into E110 Zirconium Alloy; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 12, No. 3
Udgivet: (2018)

Simple Model of Intermetallic Formation in Surface Layer during Ion Implantation; Advanced Materials Research; Vol. 1085 : Prospects of Fundamental Sciences Development (PFSD-2014)
af: Asfandyar K.
Udgivet: (2015)

Плазменно-иммерсионная ионная имплантация алюминия в титан ВТ1-0; Перспективы развития фундаментальных наук
af: Сутыгина А. Н. Алина Николаевна
Udgivet: (2015)

High-intensity chromium ion implantation into Zr-1Nb alloy; Surface and Coatings Technology; Vol. 383
Udgivet: (2020)

Microstructure of Titanium Alloy Modified by High-Intensity Implantation of Low- and MediumEnergy Aluminum Ions; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Udgivet: (2019)

Modifying physico-chemical properties of biocompatible polymers by ion implantation method; Перспективы развития фундаментальных наук; Т. 2 : Химия
af: Korostelev V. O.
Udgivet: (2018)

Influence of Surface Modification of Nitinol with Silicon Using Plasma-Immersion Ion Implantation on the Alloy Corrosion Resistance in Artificial Physiological Solutions; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Udgivet: (2015)

Microstructure and Wear Resistance of Surface Layer of Copper Modified by N+ Ion High Fluencies Implantation; Advanced Materials Research; Vol. 1085 : Prospects of Fundamental Sciences Development (PFSD-2014)
Udgivet: (2015)

Mathematical modeling of ion implantation process with accont the diffusion and mechanical waves interaction; Advanced Problems in Mechanics (APM 2016)
af: Parfenova E. S. Elena Sergeevna
Udgivet: (2016)

Unfiltered Aluminium Vacuum Arc Plasma Application for High-Frequency Short-Pulse Plasma Immersion Ion Implantation; Advanced Materials Research : Advanced materials, synthesis, development and application; Vol. 880 : Prospects of Fundamental Sciences Development (PFSD-2013)
Udgivet: (2014)

The nonisothermal model of the initial stage of ion implantation process; Nanoparticles, nanostructured coatings and microcontainers: technology, properties, applications
af: Parfenova E. S. Elena Sergeevna
Udgivet: (2016)

Modification of stainless steel based on synergistic of low-energy high-intensity ion implantation and high-current electron beam impact on the surface layer; Journal of Physics: Conference Series; Vol. 2064 : Gas Discharge Plasmas and Their Applications (GDP 2021)
Udgivet: (2021)

The Vacancy Generation Influence on the Initial Stage of Ion Implantation; Applied Mechanics and Materials; Vol. 1097 : Nanomaterials and Surface Technologies, Materials Applications
af: Parfenova E. S. Elena Sergeevna
Udgivet: (2015)

Features of Difference Scheme for the Diffusion-Kinetic Problem of Ion Implantation with Intermetallic Phases Formation; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
af: Asfandyar K.
Udgivet: (2016)

Полевая ионная микроскопия радиационных повреждений на атомно-чистой поверхности и в приповерхностном объёме металлических материалов; Известия вузов. Физика; Т. 54, № 1/2 : Радиационно-термические эффекты и процессы в неорганических материалах
af: Ивченко В. А.
Udgivet: (2011)

The influence of vacancy generation at the initial stage of ion implantation; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
af: Parfenova E. S. Elena Sergeevna
Udgivet: (2014)

Thermal-Diffusion Model of Ion Implantation with Soret and Dufour Effects; Surface Modification of Materials by Ion Beams (SMMIB-2019)
af: Chepak-Gizbrekht M. V. Mariya Vladimirovna
Udgivet: (2019)

Ионная имплантация в металлы
af: Комаров Ф. Ф. Фадей Фадеевич
Udgivet: (Москва, Металлургия, 1990)

The influence of some model parameters on the impurity distribution implanted into substrate surface; IOP Conference Series: Materials Science and Engineering; Vol. 124 : Mechanical Engineering, Automation and Control Systems (MEACS2015)
af: Parfenova E. S. Elena Sergeevna
Udgivet: (2016)

The Structure-Phase State and Corrosion Resistance Modification of Austenitic Steel in Various Conditions Ion Implantation; 7 International conference on modification of materials with particle beams and plasma flows
Udgivet: (2004)