Phase and elemental composition of silicon-containing hydroxyapatite-based coatings fabricated by RF-magnetron sputtering for medical implants; Inorganic Materials: Applied Research; Vol. 4, iss. 3

Phase and elemental composition of silicon-containing hydroxyapatite-based coatings fabricated by RF-magnetron sputtering for medical implants; Inorganic Materials: Applied Research; Vol. 4, iss. 3

Bibliographic Details
Parent link:	Inorganic Materials: Applied Research.— , 2010- Vol. 4, iss. 3.— 2013.— [P. 227-235]
Corporate Author:	Национальный исследовательский Томский политехнический университет Физико-технический институт Кафедра теоретической и экспериментальной физики Центр технологий
Other Authors:	Surmeneva M. A. Maria Alexandrovna, Surmenev R. A. Roman Anatolievich, Chaikina M. V., Kachaev A. A. Artem Alekseevich, Pichugin V. F. Vladimir Fyodorovich, Epple M.
Summary:	Title screen We studied by X-ray diffraction analysis, IR spectroscopy, and scanning electron microscopy (SEM) the phase composition and the structure of coatings based on silicon-containing hydroxyapatite (Si-HA) deposited by RF-magnetron sputtering. The sputtering target contained two phases (apatite and tricalcium phosphate) and was produced by the ceramic technology from a single-phase mechanically activated powder precursor. The structure of the coating deposited by sputtering from the two-phase target was single phase (hydroxyapatite) and textured in the (002) direction. During deposition, silicate anions partially replaced phosphate ions in the apatite lattice. Режим доступа: по договору с организацией-держателем ресурса
Language:	English
Published:	2013
Subjects:	электронный ресурс труды учёных ТПУ medical implants silicon-containing hydroxyapatite RF-magnetron sputtering biocompatible coating медицинские имплантаты гидроксиапатит кремний биосовместимые покрытия ВЧ-магнетронное распыление
Online Access:	http://dx.doi.org/10.1134/S2075113313030131
Format:	Electronic Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=647495

Similar Items

Ab initio calculations and a scratch test study of RF-magnetron sputter deposited hydroxyapatite and silicon-containing hydroxyapatite coatings; Surfaces and Interfaces; Vol. 21
Published: (2020)

Biocompatible nanostructured coatings based on calcium phosphates prepared by means of rf-magnetron sputtering deposition; The 7th International Forum on Strategic Technology (IFOST-2012), September 18-21, 2012, Tomsk
Published: (2012)

RF magnetron-sputtered coatings deposited from biphasic calcium phosphate targets for biomedical implant applications; Bioactive Materials; Vol. 2, iss. 3
Published: (2017)

RF-magnetron sputter deposited hydroxyapatite-based composite & multilayer coatings: A systematic review from mechanical, corrosion, and biological points of view; Ceramics International; Vol. 47, iss. 3
Published: (2021)

Effects of annealing in vacuum on the microstructure of silicon-containing calcium phosphate films deposited on a ZrNb alloy by radio-frequency magnetron sputtering; Vacuum; Vol. 212
Published: (2023)

Application of high-frequency magnetron sputtering to deposit thin calcium-phosphate biocompatible coatings on a titanium surface; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 1, iss. 6
Published: (2007)

Wettability of Thin Silicate-Containing Hydroxyapatite Films Formed by RF-Magnetron Sputtering; Russian Physics Journal; Vol. 56, iss. 10
Published: (2014)

Correlation between structural and mechanical properties of RF magnetron sputter deposited hydroxyapatite coating; Materials Characterization; Vol. 142
Published: (2018)

Erratum to: Wettability of Thin Silicate-Containing Hydroxyapatite Films formed by RF-Magnetron Sputtering; Russian Physics Journal; Vol. 56, iss. 11
Published: (2014)

Physical-Mechanical Characteristics of RF Magnetron Sputter-Deposited Coatings Based on Silver-Doped Hydroxyapatite; Russian Physics Journal; Vol. 56, iss. 10
Published: (2014)

Bone marrow derived mesenchymal stem cell response to the RF magnetron sputter deposited hydroxyapatite coating on AZ91 magnesium alloy; Materials Chemistry and Physics; Vol. 221
Published: (2018)

Preparation of a silicate-containing hydroxyapatite-based coating by magnetron sputtering: structure and osteoblast-like MG63 cells in vitro study: Structure and osteoblast-like MG63 cells in vitro study; RSC Advances; № 28
Published: (2013)

Glancing Angle Deposition of Zn-Doped Calcium Phosphate Coatings by RF Magnetron Sputtering; Coatings; Vol. 9, iss. 4
Published: (2019)

SiC- and Ag-SiC-Doped Hydroxyapatite Coatings Grown Using Magnetron Sputtering on Ti Alloy for Biomedical Application; Coatings; Vol. 12, iss. 2
Published: (2022)

Influence of the substrate bias on the stoichiometry and structure of RF-magnetron sputter-deposited silver-containing calcium phosphate coatings; Materialwissenschaft und Werkstofftechnik; Vol. 44, iss. 2-3
Published: (2013)

Thin calcium-phosphate coatings produced by RF Magnetron sputtering and prospects for their use in biomedical engineering; Biomedical Engineering; Vol. 42, iss. 3
Published: (2008)

Fabrication, investigations of structure and in vitro studies of hydroxyapatite-coated electron beam melted titanium substrate; Energy Fluxes and Radiation Effects (EFRE-2016)
Published: (2016)

Multiscale design of an additively manufactured Ti–Nb alloy with nanostructured Sr-substituted hydroxyapatite coating for bone tissue engineering; Ceramics International; Vol. 51, iss. 25, pt. C
Published: (2025)

In Vitro Activity Assays of Sputtered HAp Coatings with SiC Addition in Various Simulated Biological Fluids; Coatings; Vol. 9, iss. 6
Published: (2019)

Polyether Ether Ketone Coated with Ultra-Thin Films of Titanium Oxide and Zirconium Oxide Fabricated by DC Magnetron Sputtering for Biomedical Application; Materials; Vol. 15, iss. 22
Published: (2022)

Physical principles of radio-frequency magnetron sputter deposition of calcium-phosphate-based coating with tailored properties; Surface and Coatings Technology; Vol. 413
Published: (2021)

The preparation of calcium phosphate coatings on titanium and nickel-titanium by rf-magnetron-sputtered deposition: Composition, structure and micromechanical properties; Surface and Coatings Technology; Vol. 202, iss. 16
Published: (2008)

Adhesion properties of a three-layer system based on RF-magnetron sputter deposited calcium-phosphate coating and silver nanoparticles; 11th International Forum on Strategic Technology (IFOST 2016); Pt. 1
Published: (2016)

Tailoring the Surface Morphology and the Crystallinity State of Cu- and Zn-Substituted Hydroxyapatites on Ti and Mg-Based Alloys; Materials; Vol. 13, iss. 19
Published: (2020)

Effect of Intermediate Ion Cleaning of the Titanium Target on the Structure of Bioresorbable PLLA Scaffolds under Coating Deposition by DC Reactive Magnetron Sputtering; Inorganic Materials: Applied Research; Vol. 11, iss. 3
Published: (2020)

The release of nickel from nickel-titanium (NiTi) is strongly reduced by a sub-micrometer thin layer of calcium phosphate deposited by rf-magnetron sputtering; Journal of Materials Science: Materials in Medicine; Vol. 21, iss. 4
Published: (2010)

Modification of the Ceramic Implant Surfaces from Zirconia by the Magnetron Sputtering of Different Calcium Phosphate Targets: A Comparative Study; Materials; Vol. 10, iss. 10
Published: (2018)

Effect of argon and nitrogen mixing ratios on the properties of the coatings deposited via reactive magnetron sputtering of a hydroxyapatite target; Applied Surface Science; Vol. 726
Published: (2026)

Fabrication, ultra-structure characterization and in vitro studies of RF magnetron sputter deposited nano-hydroxyapatite thin films for biomedical applications; Applied Surface Science; Vol. 317
Published: (2014)

Hybrid biocomposite with a tunable antibacterial activity and bioactivity based on RF magnetron sputter deposited coating and silver nanoparticles; Applied Surface Science; Vol. 329
Published: (2015)

Nitrogen-Doped Titanium Dioxide Thin Films Formation on the Surface of PLLA Electrospun Microfibers Scaffold by Reactive Magnetron Sputtering Method; Plasma Chemistry and Plasma Processing; Vol. 39, iss. 2
Published: (2019)

Influence of Cu Substitution on the Properties of Hydroxyapatite Targets and Deposited Coatings; Coatings; Vol. 13, iss. 11
Published: (2023)

Magnetron deposition of copper oxide coatings in a metallic mode enhanced by RF-ICP source: A role of substrate biasing; Vacuum; Vol. 211
by: Sidelev D. V. Dmitry Vladimirovich
Published: (2023)

Deposition temperature effect on sputtered hydroxyapatite coatings prepared on AZ31B alloy substrate; Ceramics International; Vol. 48, iss. 8
Published: (2022)

Hot target magnetron sputtering enhanced by RF-ICP source for CrNx coatings deposition; Vacuum; Vol. 191
Published: (2021)

Hot target magnetron sputtering enhanced by RF-ICP source: Microstructure and functional properties of CrNx coatings; Vacuum; Vol. 200
Published: (2022)

Calcium phosphate coating deposition by radio frequency magnetron sputtering in the various inert gases: The pilot study; Materials Chemistry and Physics; Vol. 235
Published: (2019)

A review of plasma-assisted methods for calcium phosphate-based coatings fabrication; Surface and Coatings Technology; Vol. 206, iss. 8-9
by: Surmenev R. A. Roman Anatolievich
Published: (2012)

Технология формирования мишени для ВЧ магнетронного распыления из биметаллических частиц CU-W; Инновационные технологии в машиностроении
by: Просолов К. А.
Published: (2022)

Texture and microstructure development in rf magnetron sputter deposited hydroxyapatite coatings; Energy Fluxes and Radiation Effects (EFRE-2016)
Published: (2016)