Pulsed-electron-beam processing of materials for medical applications; Russian Physics Journal; Vol. 56, iss. 10
| Parent link: | Russian Physics Journal.— , 1965- Vol. 56, iss. 10.— 2014.— [P. 1050-1055] |
|---|---|
| अन्य लेखक: | , , , , |
| सारांश: | Title screen The data on investigation of sample materials used for fabrication of medical implants (stainless steel 316L, and VT1-0 and CoCrMo (Wironit) alloys) are reported, which were subjected to surface treatment with the pulsed electron beam having the following parameters: pulse duration – 20–200 ?s, energy density per pulse – 8–20 J/cm2, number of pulses – 1–5, and pulse repetition frequency – 0.3–1 Hz. A significant structure rearrangement is revealed, which is followed by changes in the modified surface layer properties of these materials. The surface roughness is found to decrease, while the corrosion resistance is improved; slight changes are also observed in the modified layer microhardness compared to the initial state. Режим доступа: по договору с организацией-держателем ресурса |
| भाषा: | अंग्रेज़ी |
| प्रकाशित: |
2014
|
| विषय: | |
| ऑनलाइन पहुंच: | http://dx.doi.org/10.1007/s11182-014-0155-4 |
| स्वरूप: | इलेक्ट्रोनिक पुस्तक अध्याय |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=647465 |
समान संसाधन
Plasma-emitter electron accelerators; Russian Physics Journal; Vol. 43, № 5
प्रकाशित: (2000)
प्रकाशित: (2000)
Structure and Properties of Silumin Surface after Vacuum Arc Plasma-Assisted Deposition of Coatings Irradiated by Low Energy High Current Pulsed Electron Beam; Russian Physics Journal; Vol. 62, iss. 11
प्रकाशित: (2020)
प्रकाशित: (2020)
Influence of anisotropy properties and structural inhomogeneity on elasticity and fracture of titanium alloys produced by electron-beam melting; International Journal of Advanced Manufacturing Technology; Vol. 135
प्रकाशित: (2025)
प्रकाशित: (2025)
The Possibility Investigation of Medical Electron Beam Shaping Using Devices Made from Plastics with Metallic Impurities; Physics of Atomic Nuclei; Vol. 87, iss. 12
प्रकाशित: (2024)
प्रकाशित: (2024)
Surface Doping of Steel with an Intense Pulsed Electron Beam; Key Engineering Materials; Vol. 781 : Radiation-Thermal Effects and Processes in Inorganic Materials
प्रकाशित: (2018)
प्रकाशित: (2018)
Structure and properties of welding joints of 1370 aluminum alloy obtained by electron-beam welding; Russian Physics Journal; Vol. 68, iss. 2
द्वारा: Solov’ev V. V. Vasily Vladimirovich
प्रकाशित: (2025)
द्वारा: Solov’ev V. V. Vasily Vladimirovich
प्रकाशित: (2025)
Repetitive source of pulsed electron beams; Известия вузов. Физика; Т. 55, № 10-3
प्रकाशित: (2012)
प्रकाशित: (2012)
Process window for electron beam melting of Ti–42Nb wt.%; Journal of Materials Research and Technology; Vol. 25
प्रकाशित: (2023)
प्रकाशित: (2023)
Structure Evolution and Distributions of Grain-Boundary Misorientainons in Submicrocrystalline Molybdenum Irradiated with a Pulsed Electron Beam; Russian Physics Journal; Vol. 61, iss. 1
प्रकाशित: (2018)
प्रकाशित: (2018)
The Structure and Properties of Microcrystalline and Submicrocrystalline Titanium Alloy VT1-0 in the Area of the Electron Beam Welding Seam; Russian Physics Journal; Vol. 60, iss. 6
प्रकाशित: (2017)
प्रकाशित: (2017)
Developing New Materials for Electron Beam Melting: Experiences and Challenges; Materials Science Forum; Vol. 941 : THERMEC 2018
प्रकाशित: (2018)
प्रकाशित: (2018)
Structural Changes of the B2 Phase in the Surface Layerof Titanium Nickelide after Pulsed Electron Beam Treatment; Steel in Translation; Vol. 44, iss. 8
प्रकाशित: (2014)
प्रकाशित: (2014)
SHS-process in the mixt ure of Ti, Al, C powders initiated by pulsed electron beam; Energy Fluxes and Radiation Effects (EFRE-2016)
प्रकाशित: (2016)
प्रकाशित: (2016)
Treatment of silumin surface by a modulated submillisecond electron beam; High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes; Vol. 26, iss. 4
प्रकाशित: (2022)
प्रकाशित: (2022)
Numerical simulation of electron beam depth dose distribution in water phantom passed through modified plastic materials; Journal of Physics: Conference Series; Vol. 2657 : International Scientific School-Conference on Acoustophysics named after Academician A.R. Mkrtchyan, 12-17 June, 2023, Online
प्रकाशित: (2023)
प्रकाशित: (2023)
On the Application of Pulsed Beams with a Wide Electron Kinetic Energy Spectrum; Russian Physics Journal; Vol. 63, iss. 10
प्रकाशित: (2021)
प्रकाशित: (2021)
The Special Features of the Phase Formation and Distribution in the Titanium Nickelide Surface Layers Treated by Electron Beams; Russian Physics Journal; Vol. 58, iss. 5
प्रकाशित: (2015)
प्रकाशित: (2015)
Surface Modification of the EBM Ti-6Al-4V Alloy by Pulsed Ion Beam; Metals; Vol. 11, iss. 3
प्रकाशित: (2021)
प्रकाशित: (2021)
Electron-Beam Welding - Structural-Phase State and Microhardnes in the Weld Zone in a Submicrocrystalline Titanium Alloy Grade2; Materials Science Forum; Vol. 906 : Materials and Processing Technology
प्रकाशित: (2017)
प्रकाशित: (2017)
Surface Vaporization of High-Strength Aluminum Alloy During Electron-Beam Welding; Russian Physics Journal; Vol. 65, iss. 3
प्रकाशित: (2022)
प्रकाशित: (2022)
Research of Energy Density for Pulsed Electron Beam of Wide Electron Kinetic Energy Spectrum; 20th International Symposium on High-Current Electronics (ISHCE)
प्रकाशित: (2018)
प्रकाशित: (2018)
Characterization of electron beam deposited Nb2O5 coatings for biomedical applications; Journal of the Mechanical Behavior of Biomedical Materials; Vol. 103
प्रकाशित: (2020)
प्रकाशित: (2020)
Formation of Microstructure of Lithium-Titanium Ferrite during its Synthesis in a 2.4 MeV Electron Beam; Russian Physics Journal; Vol. 63, iss. 5
प्रकाशित: (2020)
प्रकाशित: (2020)
Mechanical Properties and Structure of the Hypereutectic Silumin Treated by an Electron Beam; Key Engineering Materials; Vol. 743 : High Technology: Research and Applications (HTRA 2016)
प्रकाशित: (2017)
प्रकाशित: (2017)
Expanding manufacturability of sheet-based triply periodic minimal surfaces by electron beam powder bed fusion in Wafer theme; Materials Today Communications; Vol. 40
प्रकाशित: (2024)
प्रकाशित: (2024)
A calorimetric system for charge and kinetic energy characterizations of pulsed electron beams; Radiation Measurements; Vol. 143
प्रकाशित: (2021)
प्रकाशित: (2021)
New Ti–35Nb–7Zr–5Ta Alloy Manufacturing by Electron Beam Melting for Medical Application Followed by High Current Pulsed Electron Beam Treatment; Metals; Vol. 11, iss. 7
प्रकाशित: (2021)
प्रकाशित: (2021)
Effect of temperature and pulsed electron beam irradiation on the grain boundary ensemble of the ultrafine-grained molybdenum; Energy Fluxes and Radiation Effects (EFRE-2016)
प्रकाशित: (2016)
प्रकाशित: (2016)
Microstructure Formation and Mechanical Properties of Metastable Titanium-Based Gradient Coating Fabricated via Intense Pulse Ion Beam Melt Mixing; Materials; Vol. 16, iss. 8
प्रकाशित: (2023)
प्रकाशित: (2023)
Focusing of intense pulsed ion beam by magnetically insulated diode for material research; Surface and Coatings Technology; Vol. 384
प्रकाशित: (2020)
प्रकाशित: (2020)
Preparation and Electron-Beam Surface Modification of Novel TiNi Material for Medical Applications; Applied Sciences; Vol. 11, iss. 10
प्रकाशित: (2021)
प्रकाशित: (2021)
The Structure and Mechanical Characteristics of the Hypereutectic Silumin (Al-22-24 wt.% Si), Irradiated by a Pulsed Electron Beam; Energy Fluxes and Radiation Effects (EFRE-2020 online)
प्रकाशित: (2020)
प्रकाशित: (2020)
Structure and Properties of the Surface Layer of B4C Ceramic Treated with an Intense Electron Beam; Inorganic Materials: Applied Research; Vol. 9, iss. 3
प्रकाशित: (2018)
प्रकाशित: (2018)
A Potential Method for Diagnostics of Subfemtosecond Electron Beams Using Coherent Optical Transition Radiation; Russian Physics Journal; Vol. 61, iss. 11
द्वारा: Potylitsyn A. P. Alexander Petrovich
प्रकाशित: (2019)
द्वारा: Potylitsyn A. P. Alexander Petrovich
प्रकाशित: (2019)
On the possibility of controlling the morphology of carbon-containing titanium dioxide-based nanocomposites during pulsed plasma chemical synthesis; Fullerenes, Nanotubes and Carbon Nanostructures; Vol. 27, iss. 9
प्रकाशित: (2019)
प्रकाशित: (2019)
High-Intensity Implantation With an Ion Beam's Energy Impact on Materials; IEEE Transactions on Plasma Science; Vol. 49, iss. 9
द्वारा: Ryabchikov A. I. Aleksandr Ilyich
प्रकाशित: (2021)
द्वारा: Ryabchikov A. I. Aleksandr Ilyich
प्रकाशित: (2021)
Processing of Zr-1Nb alloy by high current pulsed electron beam; Методология проектирования молодежного научно-инновационного пространства для российской энергетики
द्वारा: Zalogina A. S.
प्रकाशित: (2013)
द्वारा: Zalogina A. S.
प्रकाशित: (2013)
Single-crystalline nanoribbon network field effect transistors from arbitrary two-dimensional materials; npj 2d materials and applications; Vol. 6, iss. 1
प्रकाशित: (2022)
प्रकाशित: (2022)
Simulation of forming diffusion zone at impulse electron-beam treatment of coated material; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 1
द्वारा: Bukrina N. V.
प्रकाशित: (2007)
द्वारा: Bukrina N. V.
प्रकाशित: (2007)
Microstructural Transformation and Enhanced Strength of Wire-Feed Electron-Beam Additive Manufactured Ti–6Al–4V Alloy Induced by High-Pressure Torsion; Advanced Engineering Materials; Vol. 26, iss. 4
प्रकाशित: (2024)
प्रकाशित: (2024)