The empirical evaluation of thermal conduction coefficient of some liquid composite heat insulating materials; IOP Conference Series: Materials Science and Engineering; Vol. 116 : Advanced Materials and New Technologies in Modern Materials Science

The empirical evaluation of thermal conduction coefficient of some liquid composite heat insulating materials; IOP Conference Series: Materials Science and Engineering; Vol. 116 : Advanced Materials and New Technologies in Modern Materials Science

Bibliographic Details
Parent link:	IOP Conference Series: Materials Science and Engineering Vol. 116 : Advanced Materials and New Technologies in Modern Materials Science.— 2016.— [012014, 6 p.]
Corporate Author:	Национальный исследовательский Томский политехнический университет (ТПУ)
Other Authors:	Anisimov M. V., Rekunov V. S., Babuta M. N. Marina Nikolaevna, Nguyen Thi Hong Bach Lien
Summary:	Title screen We experimentally determined the coefficients of thermal conductivity of some ultra thin liquid composite heat insulating coatings, for sample 1 [lambda]=0.086 W/(m [x] C), for sample 2 [lambda]=0.091 W/(m [x] C). We performed the measurement error calculation. The actual thermal conduction coefficient of the studied samples was higher than the declared one. The manufactures of liquid coatings might have used some "ideal" conditions when defining heat conductivity in the laboratory or the coefficient was obtained by means of theoretical solution of heat conduction problem in liquid composite insulating media. However, liquid insulating coatings are of great interest to builders, because they allow to warm objects of complex geometric shapes (valve chambers, complex assemblies, etc.), which makes them virtually irreplaceable. The proper accounting of heating qualities of paints will allow to avoid heat loss increase above the specified limits in insulated pipes with heat transfer materials or building structures, as well as protect them from possible thawing in the period of subzero weather. Режим доступа: по договору с организацией-держателем ресурса
Language:	English
Published:	2016
Subjects:	электронный ресурс труды учёных ТПУ эмпирические оценки теплопроводность жидкие материалы композитные материалы теплоизоляционные материалы
Online Access:	http://dx.doi.org/10.1088/1757-899X/116/1/012014 http://earchive.tpu.ru/handle/11683/18938
Format:	Electronic Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=647097

Similar Items

The empirical definition of total emissivity of modern superthin liquid composite thermal insulators; IOP Conference Series: Materials Science and Engineering; Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science
Published: (2016)

Equipment for the Production of Wood-Polymeric Thermal Insulation Materials; IOP Conference Series: Materials Science and Engineering; Vol. 142 : Innovative Technologies in Engineering
Published: (2016)

High Temperature and Heat Insulated Calcium Silicate Materials; Key Engineering Materials; Vol. 683 : Multifunctional Materials: Development and Application
Published: (2016)

Investigation of refractory thermal insulation material; IFOST 2012; Vol. 1
by: Saran G.
Published: (2012)

Fundamentals of Fibre Reinforced Composite Materials
by: Bunsell A. R.
Published: (Philadelphia, IoP, 2005)

High temperature and heat insulated calcium silicate materials; Перспективы развития фундаментальных наук
by: Пуговкина Ю. С.
Published: (2015)

Fundamentals of Materials Science and Engineering, SI Version
by: Callister W. D. William
Published: (Hoboken, John Wiley & Sons, Inc., 2013)

Heat-Insulating Materials Obtaining from Dispersive Screenings of Construction Sand; Advanced Materials Research; Vol. 1040 : High Technology: Research and Applications 2014 (HTRA 2014)
Published: (2014)

Modeling of liquid flow in surface discontinuities; IOP Conference Series: Materials Science and Engineering; Vol. 289 : Modern Technologies for Non-Destructive Testing
by: Lobanova I. S. Irina Sergeevna
Published: (2018)

The design of a die with a vacuum thermal insulation; IOP Conference Series: Materials Science and Engineering; Vol. 124 : Mechanical Engineering, Automation and Control Systems (MEACS2015)
by: Baginski A. G. Andrey Gennadievich
Published: (2016)

Use of Byproducts of Acidic Processing of Aluminium – Bearing Raw Materials in Production of Heat Insulating Materials; Procedia Chemistry; Vol. 10 : Chemistry and Chemical Engineering in XXI century
by: Duschkina M. A. Marija Alexejewna
Published: (2014)

Modern trends in materials science for the manufacture of parts for space purposes; Космическое приборостроение
by: Kolomeytsev A. A. Andrey Anatolievich
Published: (2014)

Engineering Materials; Vol. 2
by: Timings R. L.
Published: (Harlow, Longman, 2000)

Study of the effective filtration method applicability for the control of composite materials stress-strain state; IOP Conference Series: Materials Science and Engineering; Vol. 289 : Modern Technologies for Non-Destructive Testing
by: Surzhikov V. P. Vladimir Petrovich
Published: (2018)

Modern problems of material science and technology of materials and coatings: texbook
Published: (Tomsk, Tomsk Polytechnic University, 2003)

Method and Apparatus of Measuring Velocity and Sound Attenuation Coefficient in Bulk Materials Based on the Analysis of the Structure of Sound-Insulation Materials on the Basis of Perlite; IOP Conference Series: Materials Science and Engineering; Vol. 189 : Modern Technologies for Non-Destructive Testing
by: Kapranov B. I. Boris Ivanovich
Published: (2017)

Evaluation of electric, morphological and thermal properties of thermally conductive polymer composites; Applied Thermal Engineering; Vol. 91
by: Lebedev S. M. Sergey Mikhailovich
Published: (2015)

Advanced composite alloys for constructional parts of robots; IOP Conference Series: Materials Science and Engineering; Vol. 363 : Cognitive Robotics
Published: (2018)

Composite material WC1-x@C as a noble-metal-economic material for hydrogen evolution reaction; Journal of Alloys and Compounds; Vol. 834
Published: (2020)

Developing New Materials for Electron Beam Melting: Experiences and Challenges; Materials Science Forum; Vol. 941 : THERMEC 2018
Published: (2018)

Ceramic Materials for the Low-Temperature Synthesis of Dielectric Coatings Used in Electronics, Led Devices and Spacecraft Control Systems; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
by: Ivanov A. A.
Published: (2016)

Bone substitute material on the basis of natural components; IOP Conference Series: Materials Science and Engineering; Vol. 66: 20th International Conference for Students and Young Scientists: Modern Techniques and Technologies (MTT'2014), Tomsk, Russia, 14-18 April 2014
Published: (2014)

Конструкции и строительство специальных сооружений: сборник трудов
Published: (Москва, Изд-во ВНИПИТеплопроект, 1983)

Hierarchical ZIFs@Al2O3 composite materials as effective heterogeneous catalysts; Microporous and Mesoporous Materials; Vol. 297
Published: (2020)

Criterion for Controlling the Stress-Strain State of Composite Dielectric Materials Using the Effective Filtration Method; Key Engineering Materials; Vol. 781 : Radiation-Thermal Effects and Processes in Inorganic Materials
by: Surzhikov V. P. Vladimir Petrovich
Published: (2018)

Development of High Resolution Shearography Device for Non-destructive Testing of Composite Materials; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Published: (2015)

Investigation of energy efficiency of innovate thermal insulating materials and their influence on the building heat regime; MATEC Web of Conferences; Vol. 23 : Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment
by: Morozov М. N. Maksim Nikolaevich
Published: (2015)

Using quartzofeldspathic waste to obtain foamed glass material; Resource-Efficient Technologies; Vol. 2, iss. 1
by: Kazmina O. V. Olga Viktorovna
Published: (2016)

Materials Science for Engineers
Published: (Cheltenham, Nelson Thornes Ltd., 2003)

Materials Science: study aid on materials science for 15.03.01 mechanical engineering program
by: Khvorova I. A. Irina Alexandrovna
Published: (Tomsk, TPU Publishing House, 2012)

Investigation of Sensitivity of Aluminum Foil Based Strain Sensors at Fatigue Damage Evaluation of CFRP; Advanced Materials Research; Vol. 1040 : High Technology: Research and Applications 2014 (HTRA 2014)
Published: (2014)

The Use of Laser-Doppler Vibrometry for Modal Analysis of Carbon-Fiber Reinforced Composite; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Published: (2016)

Microstructure and Properties of the Composite on the Basis of Copper and Diamond; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
by: Ivashutenko A. S. Alexander Sergeevich
Published: (2016)

The Study on Thermal Expansion of Ceramic Composites with Addition of ZrW[2]O]8]; IOP Conference Series: Materials Science and Engineering; Vol. 116 : Advanced Materials and New Technologies in Modern Materials Science
Published: (2016)

Mechanics of Composite Materials
by: Kaw A. K. Autar K.
Published: (Boca Raton, Taylor & Francis, 2006)

Modeling of radiative - conductive heat transfer in compositing materials; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Published: (2017)

Materials Science Practice: study aid
Published: (Tomsk, TPU Publishing House, 2012)

Electromagnetic Method for Determining the Internal Resistance of Conductive Materials; IOP Conference Series: Materials Science and Engineering; Vol. 795 : Mechanical Engineering and Modern Technologies (MEMT2019)
by: Kuznetsov F. Y.
Published: (2020)

Preparation and Properties of Monomers, Polymers and Composite Materials
Published: (New York, Nova Science Publishers. Inc., 2007)

Ion modification of ceramic materials; Radiation Effects in Insulators
Published: (2019)