The influence of nickel layer thickness on microhardness and hydrogen sorption rate of commercially pure titanium alloy; IOP Conference Series: Materials Science and Engineering; Vol. 110 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2015)

The influence of nickel layer thickness on microhardness and hydrogen sorption rate of commercially pure titanium alloy; IOP Conference Series: Materials Science and Engineering; Vol. 110 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2015)

Dades bibliogràfiques
Parent link:	IOP Conference Series: Materials Science and Engineering Vol. 110 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2015).— 2016.— [012071, 5 p.]
Autor corporatiu:	Национальный исследовательский Томский политехнический университет (ТПУ) Физико-технический институт (ФТИ) Кафедра общей физики (ОФ)
Altres autors:	Kudiyarov V. N. Victor Nikolaevich, Kashkarov E. B. Egor Borisovich, Syrtanov M. S. Maksim Sergeevich, Yugova I. S.
Sumari:	Title screen The influence of nickel coating thickness on microhardness and hydrogen sorption rate by commercially pure titanium alloy was established in this work. Coating deposition was carried out by magnetron sputtering method with prior ion cleaning of surface. It was shown that increase of sputtering time from 10 to 50 minutes leads to increase coating thickness from 0.56 to 3.78 μm. It was established that increase of nickel coating thickness leads to increase of microhardness at loads less than 0.5 kg. Microhardness values for all samples are not significantly different at loads 1 kg. Hydrogen content in titanium alloy with nickel layer deposited at 10 and 20 minutes exceeds concentration in initial samples on one order of magnitude. Further increasing of deposition time of nickel coating leads to decreasing of hydrogen concentration in samples due to coating delamination in process of hydrogenation. Режим доступа: по договору с организацией-держателем ресурса
Idioma:	anglès
Publicat:	2016
Matèries:	электронный ресурс труды учёных ТПУ слои никель микротвердость сорбция водород титановые сплавы
Accés en línia:	http://dx.doi.org/10.1088/1757-899X/110/1/012071 http://earchive.tpu.ru/handle/11683/18082
Format:	Electrònic Capítol de llibre
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=647040

Ítems similars

The effect of electron beam treatment on hydrogen sorption ability of commercially pure titanium; Applied Surface Science; Vol. 284
Publicat: (2013)

Investigation of hydrogenation parameters influence on the hydrogen sorption rate by titanium with nickel layer; AIP Conference Proceedings; Vol. 1772 : Prospects of Fundamental Sciences Development (PFSD-2016)
Publicat: (2016)

Investigation of hydrogenation parameters influence on the hydrogen sorption rate of titanium alloy vt1-0 coated by nickel layer; Перспективы развития фундаментальных наук; Т. 1 : Физика
per: Babihina M. N.
Publicat: (2016)

The structure - phase state and microhardness of the surface layer of the VT1-0 titanium alloys treated by copper ions; Vacuum; Vol. 149
Publicat: (2018)

Combined surface modification of commercial aluminum; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publicat: (2017)

Investigation of hydrogenation parameters influence on hydrogen sorption rate by Zr-1%Nb alloy with nickel layer; Известия вузов. Физика; Т. 58, № 9-3
Publicat: (2015)

Effect of Ultrasonic Impact Treatment on Microstructure and Mechanical Properties of Commercial Purity Titanium; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Hairullin (Khayrullin) R. R. Rustam Ravilievich
Publicat: (2016)

Studies of the distribution of microhardness by the depth of zirconium alloy E110 after irradiation with pulsed electron beam and hydrogenation; Перспективы развития фундаментальных наук
per: Бабихина М. Н.
Publicat: (2015)

Effect of ion irradiation on the surface energy of deposited coatings; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publicat: (2017)

Effect of Power and Type of Substrate on Calcium-Phosphate Coating Morphology and Microhardness; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Publicat: (2015)

Spark Plasma Sintering of Commercial Zirconium Carbide Powders: Densification Behavior and Mechanical Properties; Materials; Vol. 8
Publicat: (2015)

The hydrogen sorption and desorption behavior in spherical powder of pure titanium used for additive manufacturing; International Journal of Hydrogen Energy; Vol. 42, iss. 22
Publicat: (2017)

Neutron irradiation effect on the hardness of nickel titanium alloy modified by krypton ions; Russian Physics Journal; Vol. 63, iss. 7
per: Poltavtseva V. P. Valentina Petrovna
Publicat: (2020)

Aluminum surface layer strengthening using intense pulsedbeam radiation of substrate film system; IOP Conference Series: Materials Science and Engineering; Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science
Publicat: (2016)

Positron Annihilation Spectroscopy of Defects in Commercially Pure Titanium Saturated with Hydrogen; Advanced Materials Research : Advanced materials, synthesis, development and application; Vol. 880 : Prospects of Fundamental Sciences Development (PFSD-2013)
Publicat: (2014)

Influence of intense bombardment of Cu{+} ions on microhardness and structure of VT-23 titanium alloy; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
per: Kalashnikov M. P. Mark Petrovich
Publicat: (2014)

Effect of Initial Microtopography and Ultrasonic Treatment Mode on Steel Surface Layer Quality; IOP Conference Series: Materials Science and Engineering; Vol. 125 : Materials Treatment: Current Problems and Solutions
per: Zaitsev K. V. Konstantin Viktorovich
Publicat: (2016)

The Structure of Quaternary Iron-Based Alloy Obtained at High and Ultrahigh Cooling Rates; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
per: Kovalevskaya Zh. G. Zhanna Gennadievna
Publicat: (2016)

The effect of ultrasonic impact treatment on the deformation behavior of commercially pure titanium under uniaxial tension; Materials and Design; Vol. 117
Publicat: (2017)

Microstructure of Modified Layer Produced Using Aluminum Oxy-Hydroxide Nanostructured Powders; IOP Conference Series: Materials Science and Engineering; Vol. 125 : Materials Treatment: Current Problems and Solutions
Publicat: (2016)

Investigation of the structure and microhardness of Mo-Fe-C coatings obtained by the electron beam injected in the atmosphere; IOP Conference Series: Materials Science and Engineering; Vol. 124 : Mechanical Engineering, Automation and Control Systems (MEACS2015)
Publicat: (2016)

Effect of Age Hardening on Phase Composition and Microhardness of V-Free and V-Alloyed High-Nitrogen Austenitic Steels; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Publicat: (2018)

Structure of Austenitic Steel Surface Layer Subjected to Compression Plasma Flows Impact; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publicat: (2019)

Effect of Rolling on Phase Composition and Microhardness of Austenitic Steels with Different Stacking-Fault Energies; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publicat: (2017)

Influence of titanium implantation on hydrogen sorption rate of zr-2.5nb; Перспективы развития фундаментальных наук; Т. 1 : Физика
per: Sutygina A. N. Alina Nikolaevna
Publicat: (2016)

Microhardness Homogeneity and Microstructure of High-Nitrogen Austenitic Steel Processed by High-Pressure Torsion; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publicat: (2017)

High Intensity Implantation of Aluminium Ions into Titanium; 7 International conference on modification of materials with particle beams and plasma flows
Publicat: (2004)

Structure of Ti-6Al-4V nanostructured titanium alloy joint obtained by resistance spot welding; AIP Conference Proceedings; Vol. 1698 : Advanced Materials in Technology and Construction, AMTC-2015
Publicat: (2016)

Electron-Beam Welding - Structural-Phase State and Microhardnes in the Weld Zone in a Submicrocrystalline Titanium Alloy Grade2; Materials Science Forum; Vol. 906 : Materials and Processing Technology
Publicat: (2017)

Structural features of Ni-Cr-Si-B materials obtained by different technologies; IOP Conference Series: Materials Science and Engineering; Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science
Publicat: (2016)

The effect of rolling on phase composition and microhardness of austenitic steels with different stacking-fault energies; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
Publicat: (2017)

Improving the Mechanical Properties of SiC-ceramics by means of Vacuum Electron-ion-plasma Alloying with Titanium; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
Publicat: (2020)

Hydrogen Concentration Measurements at Titanium Layers by Means of Thermo-EMF; Key Engineering Materials; Vol. 683 : Multifunctional Materials: Development and Application
per: Lider A. M. Andrey Markovich
Publicat: (2016)

Effect of age hardening on phase composition and microhardness of v-free and v-alloyed high-nitrogen austenitic steels; Иерархические материалы: разработка и приложения для новых технологий и надежных конструкций
Publicat: (2018)

Investigation of Commercially Pure Titanium Structure during Accumulation and Release of Hydrogen by Means of Positron Lifetime and Electrical Resistivity Measurements; Advanced Materials Research : Advanced materials, synthesis, development and application; Vol. 880 : Prospects of Fundamental Sciences Development (PFSD-2013)
Publicat: (2014)

Changing of the Structural-Phase State and Mechanical Properties of VT-23 Titanium Alloy under Surface Treatment by Intense Flux of Copper Ions; Advanced Materials Research; Vol. 1085 : Prospects of Fundamental Sciences Development (PFSD-2014)
per: Sergeev V. P. Viktor Petrovich
Publicat: (2015)

Regularities of Structure and Phase Composition Formation of Surface Layer of Silumin Subjected to Electron-Beam Treatment; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
Publicat: (2016)

The Effect of Electron Beam Welding on the Microstructure and Microhardness of 3D-Printed Products from Titanium Alloy Ti-6Al-4V; Physics of Metals and Metallography; Vol. 122, iss. 2
Publicat: (2021)

Structural and Phase Transformations in Iron-Based Alloy Obtained in Conditions of High Cooling Rate Crystallization; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
per: Kovalevskaya Zh. G. Zhanna Gennadievna
Publicat: (2016)

Reflectivity and microhardness of sulfide minerals as genetic information source (case study: pyrite and arsenopyrite); IOP Conference Series: Earth and Environmental Science; Vol. 33 : Contemporary Issues of Hydrogeology, Engineering Geology and Hydrogeoecology in Eurasia
Publicat: (2016)