Regularities of Structure and Phase Composition Formation of Surface Layer of Silumin Subjected to Electron-Beam Treatment

Regularities of Structure and Phase Composition Formation of Surface Layer of Silumin Subjected to Electron-Beam Treatment

Bibliografske podrobnosti
Parent link:	Key Engineering Materials: Scientific Journal Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015).— 2016.— [P. 715-718]
Korporativna značnica:	Национальный исследовательский Томский политехнический университет
Drugi avtorji:	Tkachenko A. V., Petrikova E. A., Ivanov Yu. F. Yuriy Fedorovich, Teresov A. D.
Izvleček:	Title screen It has been shown that electron beam treatment of silumin is accompanied by the formation of multilayer submicro-and nanocrystalline structure and result in increasing the microhardness of the surface layer (towards the core) is ~ 1.5 times up to 2 GPa. Investigation of cross-sections of the samples also showed an increase of microhardness of the surface layers up to 50 [mu]m and 70 [mu]m under the best conditions of irradiation on "GEZA-1" setup and "SOLO" setup respectively. Режим доступа: по договору с организацией-держателем ресурса
Izdano:	2016
Serija:	Discharge and Plasma-Beam Technology
Teme:	электронный ресурс труды учёных ТПУ электронно-лучевая обработка наноструктуры силумины структуры фазовый состав поверхностные слои микротвердость
Online dostop:	http://dx.doi.org/10.4028/www.scientific.net/KEM.685.715
Format:	Elektronski Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=646523

Podobne knjige/članki

Modification of the sample's surface of hypereutectic silumin by pulsed electron beam
Izdano: (2016)

Structure and mechanical characteristics of the hypereutectic silumin subjected to pulsed electron beam treatment
Izdano: (2019)

Fractography of Fatigue Fracture Surface in Silumin Subjected to Electron-Beam Processing
Izdano: (2016)

The possibility of modification of silumin by an electron beam
od: Rygina M. E.
Izdano: (2018)

Multilevel Hierarchical Structure of Silumin Subjected to Multicycle Surface Alloying
Izdano: (2019)

Formation of Three-Component Phases in Silumins Using a Modifying Mixture Based on Refractory Metals
Izdano: (2018)

Structure-phase states of silumin surface layer after electron beam and high cycle fatigue
Izdano: (2015)

Treatment of silumin surface by a modulated submillisecond electron beam
Izdano: (2022)

Microstructure and Phase Composition of 3D-Printed Titanium Alloy Ti-6Al-4V Parts Subjected to Thermal Post-Processing
Izdano: (2018)

Microdifractional analysis of the structure of high-speed cellular crystallization of silumine
Izdano: (2019)

Phase Composition and Mechanical Properties Modification in Cr/Ti System by Short-Pulsed High Intensity Ion Beams Treatment
Izdano: (2015)

Structure and phase composition of Nb/Ti system subjected to compression plasma flow impact
Izdano: (2015)

Modifying of the Eutectic Silumin surface by the Electron-Ion-Plasma Method
Izdano: (2019)

Change in the Phase Composition and Lattice Parameters of the Solid Solution Based on a-Ti in the Surface Layers of the Ti–6Al–4V Alloy Subjected to Electron-Beam Treatment
od: Perevalova O. B. Olga Borisovna
Izdano: (2020)

Nanostructuring of a Surface Layer as a Way to Improve the Mechanical Properties of Hypoeutectic Silumin
Izdano: (2020)

Deformation and Fracture of Hypereutectic Silumin Samples with a Surface Modified with an Intense Pulsed Electron Beam
Izdano: (2019)

Structure, phase composition and mechanical properties of hard alloy treated by intense pulsed electron beams
Izdano: (2012)

Simulating the Formation of Composite Surface Structure during Electron Beam Treatment
od: Kryukova O. N.
Izdano: (2014)

Механические характеристики силумина заэвтектического состава, подвергнутого ионно-элекронно-плазменной модификации
od: Рыгина М. Е.
Izdano: (2018)

Hypereutectic silumin modification by ion-electron-plasma method
Izdano: (2018)

Phase composition in NiTi near-surface layers after electron beam treatment and its variation depending on beam energy density
Izdano: (2014)

Vacuum electron beam deposition of carbide steels: Part 3. Effect of the number of passes on the structure and phase condition of composite coatings based on R6M5 high-speed steel
Izdano: (2011)

The effect of rolling on phase composition and microhardness of austenitic steels with different stacking-fault energies
Izdano: (2017)

Mechanical Properties and Structure of the Hypereutectic Silumin Treated by an Electron Beam
Izdano: (2017)

Атлас микроструктур промышленных силуминов
od: Белов Н. А.
Izdano: (Москва, МИСИС, 2009)

Влияние модификатора K2ZrF6 на фазовый состав алюминиевого сплава марки АК7ч
od: Казанцева Л. А.
Izdano: (2019)

The Structure of Quaternary Iron-Based Alloy Obtained at High and Ultrahigh Cooling Rates
od: Kovalevskaya Zh. G. Zhanna Gennadievna
Izdano: (2016)

Атлас микроструктур промышленных силуминов справочник
od: Белов Н. А. Николай Александрович
Izdano: (Москва, МИСиС, 2009)

Surface modification of selective laser melted Ti-6Al-4V by ultrasonic impact treatment and electron beam irradiation
od: Sinyakova E. A.
Izdano: (2019)

Effect of age hardening on phase composition and microhardness of v-free and v-alloyed high-nitrogen austenitic steels
Izdano: (2018)

Phase Composition and Microstructure of Ti-Nb Alloy Produced by Selective Laser Melting
Izdano: (2016)

Surface modification of selective laser melted Ti-6Al-4V parts by ultrasonic impact treatment and electron beam irradiation
od: Sinyakova E. A.
Izdano: (2019)

Effect of Age Hardening on Phase Composition and Microhardness of V-Free and V-Alloyed High-Nitrogen Austenitic Steels
Izdano: (2018)

Фазовый состав и структура силуминов [справочное издание]
od: Белов Н. А. Николай Александрович
Izdano: (Москва, Изд-во МИСиС, 2008)

Особенности формирования структуры и фазового состава в субмикрокристаллическом титановом сплаве ВТ1-0 в области сварного шва, полученного электронно-лучевой сваркой
Izdano: (2017)

Microdiffraction analysis of structure of silumin's high-velocity cellular crystallization
Izdano: (2019)

Effect of Rolling on Phase Composition and Microhardness of Austenitic Steels with Different Stacking-Fault Energies
Izdano: (2017)

Heat Treatment of the Ti-6Al-4V Alloy Manufactured by Electron Beam Melting
Izdano: (2019)

Influence of Arc Welding Power Supply on Structural Phase Composition of X12CrNiTi 18-9 (DIN) Weld
Izdano: (2015)

Mesoscopic Structural States at the Nanoscale in Surface Layers of Titanium and Its Alloy Ti-6Al-4V in Ultrasonic and Electron Beam Treatment
Izdano: (2019)