The Influence of the Pouring Temperature on the Structure and Properties of Copper Metal Alloys; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)

The Influence of the Pouring Temperature on the Structure and Properties of Copper Metal Alloys; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)

Dades bibliogràfiques
Parent link:	Key Engineering Materials: Scientific Journal Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015).— 2016.— [P. 450-454]
Autor principal:	Korchmit A. V. Anton Viktorovich
Autor corporatiu:	Национальный исследовательский Томский политехнический университет (ТПУ) Институт физики высоких технологий (ИФВТ) Кафедра материаловедения и технологии металлов (МТМ)
Altres autors:	Martyushev N. V. Nikita Vladimirovich, Drozdov Yu. Yu. Yury Yurievich
Sumari:	Title screen The paper presents the information on the temperature influence on the structure and properties of copper alloys. The results of mechanical testing of samples made of tin-base bronzes depending on the pouring temperature and section thickness of the casting have been discussed. The correlation between the superheat value and distribution of structural constituents of multicomponent tin-base bronzes has been considered. It has been ascertained that the increase in the pouring temperature not only causes grain refinement in eutectoid and lead impurities in tin-base bronzes, but also has a favourable effect on their hydrostrength. Режим доступа: по договору с организацией-держателем ресурса
Idioma:	anglès
Publicat:	2016
Col·lecció:	Mechanical Engineering Technology
Matèries:	электронный ресурс труды учёных ТПУ литье газы выбросы заливка медь металлические сплавы температура олово бронза
Accés en línia:	http://dx.doi.org/10.4028/www.scientific.net/KEM.685.450
Format:	Electrònic Capítol de llibre
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=646460

Ítems similars

Casting Quality Enhancement of Bushings Made of Foundry Aluminium Bronzes; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Korchmit A. V. Anton Viktorovich
Publicat: (2016)

Structure and Properties of Multicomponent Bronze Depending on the Crystallization Conditions; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
per: Korchmit A. V. Anton Viktorovich
Publicat: (2015)

Mechanical Properties of Spun Castings of Multicomponent Bronze Depending on the Casting Conditions; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
per: Korchmit A. V. Anton Viktorovich
Publicat: (2015)

Lead Distribution in Centrifugal-Cast Billets Made of Quinary Tin-Base Bronze Depending on the Mould Spin Rate; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Korchmit A. V. Anton Viktorovich
Publicat: (2016)

Structure and Properties of Multicomponent Tin Leaded Bronzes upon Die-Casting Depending on Pouring Temperature; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
Publicat: (2015)

Влияние температуры заливки в оболочковые формы на структуру и свойства пятикомпонентной оловяннистой бронзы; Современные проблемы машиностроения и приборостроения
per: Корчмин А. В.
Publicat: (2003)

Влияние температуры заливки на формирование структуры и свойств пятикомпонентной свинцовооловянистой бронзы отлитой центробежным способом; Современные проблемы машиностроения
per: Корчмит А. В.
Publicat: (2004 )

Влияние температуры заливки в алюмохромфосфатные формы на структуру и свойства пятикомпонентной оловяннистой бронзы; Прогрессивные технологии и экономика в машиностроении
per: Корчмит А. В.
Publicat: (2003)

Влияние температуры заливки на распределение свинцовых включений в многокомпонентной свинцовооловянистой бронзе; Известия Томского политехнического университета [Известия ТПУ]; Т. 307, № 6
per: Корчмит А. В. Антон Викторович
Publicat: (2004)

Влияние олова и никеля на морфологию свинцовых включений в бронзах; Известия вузов. Физика; Т. 59, № 7, ч.2
per: Клочков Н. С. Николай Сергеевич
Publicat: (2016)

Антифрикционные сплавы
per: Шпагин А. И. Алексей Иванович
Publicat: (Москва, Металлургиздат, 1956)

О бронзах вообще и о колокольных в частности
per: Тихонов Т. И. Тихон Иванович
Publicat: (Томск, Типо-литография Сибирского Т-ва Печатного Дела, 1911)

Microstructure and Properties of the Composite on the Basis of Copper and Diamond; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Ivashutenko A. S. Alexander Sergeevich
Publicat: (2016)

Strength of Cutting Tool in Titanium Alloy Machining; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Kozlov V. N. Victor Nikolayevich
Publicat: (2016)

Металлы и сплавы в автостроении
per: Ассонов А. Д.
Publicat: (Москва, Машгиз, 1954)

Tin and Nickel Influence on the Structure and Properties of the Leaded Bronze Obtained by Means of the Centrifugal Casting; Materials Science Forum; Vol. 870 : Materials Engineering and Technologies for Production and Processing II
Publicat: (2016)

Влияние температуры разливки в кокиль на структуру и свойства пятикомпонентной оловянистой бронзы; Современные техника и технологии - СТТ' 2002; Т. 2
per: Корчмит А. В.
Publicat: (2002)

Extraction of Oil Heteroatomic Compounds Using Metal Powders; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Golushkova E. B. Evgeniya Borisovna
Publicat: (2016)

The Effect of Cu–Mo–S Coatings on Wear Resistance of Copper Friction Pair; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
Publicat: (2016)

Luminescence of LiF Crystals Doped with Metal Oxide Impurities; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Korepanov V. I. Vladimir Ivanovich
Publicat: (2016)

Influence of Severe Plastic Deformation on Physicomechanical Properties of Ti-40 mas % Nb Alloy; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
Publicat: (2016)

Friction Influence on the Accuracy of the Rotors Automatic Balance; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
Publicat: (2016)

Effect of Copper Additives on Mechanical and Tribotechnical Properties of Sintered Composites Al-Sn; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Rusin N. M.
Publicat: (2016)

Литейное дело. Отливка изделий из чугуна, стали, железа, бронзы, латуни, цинка, свинца и олова.
per: Штейн Р.
Publicat: (СПб., Книгоиздательство А. С. Сухова, 1913)

Раздел 1: Зарождение металлургического производства; История науки и образования
Publicat: (2002)

Treeing Morphology in Oil Shale; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
Publicat: (2016)

Flexible Process Model Design; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Rudometkina M. N. Monika Nikolaevna
Publicat: (2016)

Software Traceability – A Key to Improve Software Evolution; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Ponomarev A. A. Aleksey Anatolievich
Publicat: (2016)

Metal Surface Treatment with Particle Fluxes Taking into Account the Internal Boundary; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Parfenova E. S. Elena Sergeevna
Publicat: (2016)

Integration of Heterogeneous Company Information Resources Using Semantic Technologies; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Chernii (Cherniy) A. V. Anton Vasilievich
Publicat: (2016)

Influence of Filling Agent Quantity on Characteristics of Polymeric Composites; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Vitske R. E. Rudolf Evaldovich
Publicat: (2016)

The Microscopical Examination of the Alloys of Copper and Tin: Being an Appendix to the Reports of the Alloys Research Committee
per: Campbell W. William
Publicat: ([S. l.], [s. n.], 1901)

Микротвердость валиков из бронзы ПГ-19М-01, нанесенных как составляющая мултимодального покрытия методом лазерной наплавки; Инновационные технологии в машиностроении
per: Девойно О. Г.
Publicat: (2018)

Увеличение прочностных и триботехнических характеристик бронз с высокими антифрикционными свойствами; Ресурсоэффективным технологиям - энергию и энтузиазм молодых
per: Шахова Д. С.
Publicat: (2010)

Non-Uniform Temperature Distribution in Multilayer Thermal Protective Coating with Curved Interfaces; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Chumakov Yu. A. Yuri Aleksandrovich
Publicat: (2016)

Formalized Approach in Relational Database Design; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Osipova V. V. Viktoriya Viktorovna
Publicat: (2016)

Simulation of the Acoustic Field of Antenna Arrays; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
Publicat: (2016)

Optimality Conditions for Pareto-Optimal Solutions; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Gorbunov V. M. Vladimir Mikhailovich
Publicat: (2016)

SLS Setup and its Working Procedure; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
Publicat: (2016)

Production of Powders by the Method of Electrospark Dispersion; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
Publicat: (2016)