Effect of Ultrasonic Impact Treatment on Microstructure and Mechanical Properties of Commercial Purity Titanium; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)

Effect of Ultrasonic Impact Treatment on Microstructure and Mechanical Properties of Commercial Purity Titanium

Podrobná bibliografie
Parent link:	Key Engineering Materials: Scientific Journal Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015).— 2016.— [P. 330-333]
Hlavní autor:	Hairullin (Khayrullin) R. R. Rustam Ravilievich
Korporativní autor:	Национальный исследовательский Томский политехнический университет (ТПУ) Институт физики высоких технологий (ИФВТ) Кафедра материаловедения в машиностроении (ММС)
Další autoři:	Kozelskaya A. I. Anna Ivanovna, Kazachenok M.
Shrnutí:	Title screen The paper presents a study of the ultrasonic impact treatment effect on the microstructure and mechanical properties of commercial purity titanium (CP-Ti). The texture, residual stresses, the size of coherent scattering region, the thickness of plastic deformation layer and the microhardness of CP-Ti specimens subjected to ultrasonic impact treatment were studied. It was found that ultrasonic impact treatment of CP-Ti specimens resulted in severe plastic deformation of their surface layer. The plastic deformation caused twin and low angle boundary formation in the surface layer. The last-named led to a crystallographic texture change, a decrease in the size of coherent scattering region, an increase in compressive residual stresses and a growth of microhardness of the surface layer of titanium specimens. Режим доступа: по договору с организацией-держателем ресурса
Jazyk:	angličtina
Vydáno:	2016
Edice:	Mechanical Engineering Technology
Témata:	электронный ресурс труды учёных ТПУ титан микротвердость микроструктуры пластическая деформация остаточные напряжения текстуры ультразвуковое воздействие
On-line přístup:	http://dx.doi.org/10.4028/www.scientific.net/KEM.685.330
Médium:	Elektronický zdroj Kapitola
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=646445

Podobné jednotky

Structure Fragmentation of a Surface Layer of Commercial Purity Titanium During Ultrasonic Impact Treatment; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Vydáno: (2015)

Influence of friction mixing treatment on microstructure and mechanical characteristics of L63 brass; Перспективы развития фундаментальных наук; Т. 2 : Химия
Autor: Sudarikov A. V.
Vydáno: (2022)

Texture and microstructure development in rf magnetron sputter deposited hydroxyapatite coatings; Energy Fluxes and Radiation Effects (EFRE-2016)
Vydáno: (2016)

Mechanisms of surface roughening of commercial purity titanium during ultrasonic impact treatment; Materials Science and Engineering: A; Vol. 647
Vydáno: (2015)

Microstructure of Modified Layer Produced Using Aluminum Oxy-Hydroxide Nanostructured Powders; IOP Conference Series: Materials Science and Engineering; Vol. 125 : Materials Treatment: Current Problems and Solutions
Vydáno: (2016)

Microstructure of AA 2024 Fixed Joints Formed by Friction Stir Welding; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Vydáno: (2015)

Microstructural Changes in Co Films Depending on MOCVD Conditions; Advanced Materials Research; Vol. 1085 : Prospects of Fundamental Sciences Development (PFSD-2014)
Autor: Hairullin (Khayrullin) R. R. Rustam Ravilievich
Vydáno: (2015)

Microstructure and Phase Composition of 3D-Printed Titanium Alloy Ti-6Al-4V Parts Subjected to Thermal Post-Processing; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Vydáno: (2018)

Phase Composition and Microstructure of Ti-Nb Alloy Produced by Selective Laser Melting; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
Vydáno: (2016)

Microstructure Evolution in Dissimilar AA6060/Copper Friction Stir Welded Joints; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Autor: Kalashnikova T. V. Tatiana Vladimirovna
Vydáno: (2017)

Microstructure of Fixed Butt Joints Formed by Friction Stir Welding on 2024T3 Aluminum Alloy; Key Engineering Materials; Vol. 683 : Multifunctional Materials: Development and Application
Vydáno: (2016)

The Deformation Behavior of Commercially Pure Titanium Subjected to Electron Beam Treatment; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Vydáno: (2015)

The Effect of Electropulsing-Assisted Ultrasonic Impact Treatment on the Microstructure, Phase Composition, and Microhardness of Electron-Beam-Welded 3D Printed Ti-6Al-4V Alloy; Physics of Metals and Metallography; Vol. 123, iss. 9
Vydáno: (2022)

Microhardness Homogeneity and Microstructure of High-Nitrogen Austenitic Steel Processed by High-Pressure Torsion; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Vydáno: (2017)

Microstructure and properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si parts produced by electron beam melting; Journal of Physics: Conference Series; Vol. 1115 : 6th International Congress "Energy Fluxes and Radiation Effects", EFRE2018. 14th International Conference on Modification of Materials with Particle Beams and Plasma Flows (14th CMM)
Vydáno: (2018)

Density and microstructural investigation of Ce:YAG ceramic subjected to powerful ultrasonic treatment during the compaction process; IOP Conference Series: Materials Science and Engineering; Vol. 754 : High Technology: Research and Applications (HTRA-2019)
Vydáno: (2020)

Изменение структуры и фазового состава нелегированной стали в зоне термического влияния катодных пятен вакуумной дуги; Физика и химия обработки материалов; № 4
Vydáno: (2014)

Heat Treatment of the Ti-6Al-4V Alloy Manufactured by Electron Beam Melting; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Vydáno: (2019)

Ultrasonic-assisted aging in friction stir welding on Al-Cu-Li-Mg aluminum alloy; Welding in the World; Vol. 61, iss. 4
Vydáno: (2017)

Microstructure of Weld Joint of Additive Manufactured Ti-6Al-4V Alloy; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Autor: Iakhin A. Albert
Vydáno: (2019)

Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment. Part I. Commercially Pure Titanium; Metals; Vol. 11, iss. 4
Vydáno: (2021)

The Effect of Electron Beam Welding on the Microstructure and Microhardness of 3D-Printed Products from Titanium Alloy Ti-6Al-4V; Physics of Metals and Metallography; Vol. 122, iss. 2
Vydáno: (2021)

Effect of Pulsed Electron Beam Irradiation on Microstructure of TiC/Ti6Al4V Composites Fabricated by Laser Metal Deposition; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Autor: Sinyakova E. A.
Vydáno: (2019)

Optimization of aluminumand its alloys doping by ionic-beamplasmacoating; IOP Conference Series: Materials Science and Engineering; Vol. 124 : Mechanical Engineering, Automation and Control Systems (MEACS2015)
Vydáno: (2016)

Влияние исходного структурного состояния технического титана ВТ1-0 на изменение микроструктуры и микротвердости его поверхностного слоя в процессе ультразвуковой обработки; Инженерия для освоения космоса
Autor: Хайруллин Р. Р. Рустам Равильевич
Vydáno: (2016)

Modification of the structure of surface layers of commercial titanium in the process of treatment by low-energy high-current electron beams; The Physics of Metals and Metallography; Vol. 117, iss. 6
Vydáno: (2016)

Influence of Arc Welding Power Supply on Structural Phase Composition of X12CrNiTi 18-9 (DIN) Weld; Applied Mechanics and Materials; Vol. 770 : Urgent Problems of Up-to-Date Mechanical Engineering
Vydáno: (2015)

Изменение фазового состава, микроструктуры и микротвердости высокоазотистой стали после старения; Современные материалы и технологии новых поколений
Vydáno: (2019)

Влияние старения на микроструктуру и микротвердость высокоазотистой аустенитной стали Х23АГ17; Перспективные материалы конструкционного и медицинского назначения
Autor: Тумбусова И. А.
Vydáno: (2018)

Grain Characteristics and Mechanical Properties of Bioinert Ti-40 wt. % Nb Alloy; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Vydáno: (2019)

The influence of nickel layer thickness on microhardness and hydrogen sorption rate of commercially pure titanium alloy; IOP Conference Series: Materials Science and Engineering; Vol. 110 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2015)
Vydáno: (2016)

Исследование образцов из титанового сплава Ti-6Al-4V, полученных методом электронно-лучевого сплавления; Перспективы развития фундаментальных наук; Т. 1 : Физика
Autor: Николаева А. В.
Vydáno: (2020)

Сравнительный анализ влияния концентрации CH4/N2 на микроструктуру и свойства алмазных пленок; Перспективные материалы конструкционного и функционального назначения
Vydáno: (2022)

Effect of Initial Microtopography and Ultrasonic Treatment Mode on Steel Surface Layer Quality; IOP Conference Series: Materials Science and Engineering; Vol. 125 : Materials Treatment: Current Problems and Solutions
Autor: Zaitsev K. V. Konstantin Viktorovich
Vydáno: (2016)

Импульсная электронно-лучевой обработка покрытия на основе стали 10Р6М5: микроструктура и микротвёрдость; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
Autor: Исакин И. А.
Vydáno: (2017)

Regularities of Structure and Phase Composition Formation of Surface Layer of Silumin Subjected to Electron-Beam Treatment; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
Vydáno: (2016)

Исследование микроструктуры и микротвердости полученных образцов силицированного графита в зависимости от состава; Интеллектуальные энергосистемы; Т. 2
Autor: Торехан Г. Е.
Vydáno: (2017)

Микроструктура и свойства стальных полуфабрикатов 308LSI, полученных методом осаждения металлической проволоки; Перспективы развития фундаментальных наук; Т. 1 : Физика
Autor: Дронюк Г. Д.
Vydáno: (2018)

Исследование влияния параметров электронно-лучевой сварки на структуру шва в титановых изделиях, полученных традиционными и аддитивными методами; Перспективы развития фундаментальных наук; Т. 1 : Физика
Autor: Яхин А. Альберт
Vydáno: (2021)

XRD investigations of co films deposited by CVD; Современные техника и технологии; Т. 2
Autor: Hairullin (Khayrullin) R. R. Rustam Ravilievich
Vydáno: (2014)