A study on microstructure and service property of Ni3Al base alloy irradiated by intense pulsed ion beams
| Parent link: | Surface and Coatings Technology: Scientific Journal Vol. 158-159.— 2002.— [P. 482-487] |
|---|---|
| Other Authors: | Han B. X., Zhang H. T., Zhao W. J., Yan S., Le X. Y., Xiang W., Wang T. M., Remnev G. E. Gennady Efimovich |
| Summary: | Title screen Poceedings of the 12th International Conference on SMMIB Ni3Al base alloy samples, a kind of high temperature material, were irradiated with intense pulsed ion beams (IPIB) at the beam parameters of 250 KV acceleration voltage, 100-200 A/cm2 current density and 60 ns pulse duration. The surface morphology and the cross-section microstructures of the samples were observed with Scanning Electron Microscope (SEM); X-ray Diffraction (XRD) method was used to determine the phase and structural changes that occurred in the near surface region of the samples after IPIB irradiation. Craters with different diameters ranging from a few microns to 30 microns appeared and spread all over the irradiated surfaces. The near surface region of irradiated samples had been melted or even evaporated and then was quickly resolidified; moreover a new structural layer of approximately 4-5 μm thick was formed at 200 A/cm2 IPIB irradiation. Both the wear resistance and the oxidation resistance property at high temperature environment were improved in general at the near surface region of irradiated samples. The relations between the microstructural transformations and the service property changes were reasonably discussed. Режим доступа: по договору с организацией-держателем ресурса |
| Published: |
2002
|
| Subjects: | |
| Online Access: | http://dx.doi.org/10.1016/S0257-8972(02)00296-7 |
| Format: | Electronic Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=645276 |
Similar Items
Modification of AISI 420 Steel under Repetitively Pulsed Energetic Impact on the Surface of a Powerful Ion Beam of Submillisecond Duration
by: Merzlyakov I. Ivan
Published: (2024)
by: Merzlyakov I. Ivan
Published: (2024)
Formation of nanoscale carbon structures in the surface layer of metals under the impact of high intensity ion beam
Published: (2014)
Published: (2014)
Dry Reforming of Methane over Ni/WC Catalysts: Effect of Ni Content and CH4:CO2 Ratio
Published: (2025)
Published: (2025)
Influence of ablation on energy deposition in polymer material under irradiation of intense pulsed ion beam
Published: (2020)
Published: (2020)
Study on the damage of Zr63.5Cu23Al9Fe4.5 amorphous and crystalline alloys irradiated by high intensity pulsed ion beam
Published: (2022)
Published: (2022)
The effect of crater creation on the fatigue strength and corrosion resistance of steels and titanium alloys irradiated by high-power pulsed ion beams
by: Shulov V. A.
Published: (2002)
by: Shulov V. A.
Published: (2002)
Enhancing Microhardness and Corrosion Resistance of Anodic Oxides Grown on Hypoeutectic Al–Si Alloys Pretreated by Low-Energy High-Current Electron Beams
Published: (2024)
Published: (2024)
Ni, Co and Ni-Co-Modified Tungsten Carbides Obtained by an Electric Arc Method as Dry Reforming Catalysts
Published: (2022)
Published: (2022)
Influence of short-pulsed Ion irradiation on optical and photoelectrical properties of thin gallium oxide films
Published: (2025)
Published: (2025)
Combined Method of Cutting Tool Treatment
by: Tarbokov V. A. Vladislav Aleksandrovich
Published: (2019)
by: Tarbokov V. A. Vladislav Aleksandrovich
Published: (2019)
The Effect of Hydrogen on Martensite Transformations and the State of Hydrogen Atoms in Binary TiNi-Based Alloy with Different Grain Sizes
Published: (2019)
Published: (2019)
Correlation between Properties of Oxide Compounds Formed on Contact Surfaces of Cutting Tools and Cutting Tool Wear Resistance
by: Nesterenko V. P. Vladimir Petrovich
Published: (2018)
by: Nesterenko V. P. Vladimir Petrovich
Published: (2018)
Changing Mechanisms of High-Temperature Oxidation of Zr-1%Nb Alloy in Air and Steam by Surface Modification with Charged Particles
Published: (2025)
Published: (2025)
Influence of the Properties of Surface Polyoxide Structures on Wear Processes in Solid Bodies
Published: (2020)
Published: (2020)
Radiation Stability of Metal Fe0.56Ni0.44 Nanowires Exposed to Powerful Pulsed Ion Beams
Published: (2018)
Published: (2018)
DIN 1.7035 Steel Modification with High Intensity Nitrogen Ion Implantation
Published: (2018)
Published: (2018)
Effects on structure and properties of Zr55Al 10Cu30Ni5 metallic glass irradiated by high intensity pulsed ion beam
Published: (2014)
Published: (2014)
Effectiveness of inert plasma gases in formation of modified structures in the surface layer of a cermet composite under pulsed electron irradiation
Published: (2018)
Published: (2018)
Ion-Plasma Spraying and Electron-Beam Treatment of Composite Cr-Al-Co-ZrO2-Y2O3 Coating on the Surface of Ni-Cr Alloy
Published: (2021)
Published: (2021)
Effect on mechanics properties and microstructure of molybdenum by high intensity pulsed ion beam irradiation
Published: (2020)
Published: (2020)
Structure and phase composition of tungsten alloys modified by compression plasma flows and high-intense pulsed ion beam impacts
Published: (2019)
Published: (2019)
Special Aspects of High-Intensity Low-Energy Ion Implantation
Published: (2021)
Published: (2021)
Effect on microstructure of Fe80B13Si7 metallic glass irradiated by high intensity pulsed ion beam and He ions
Published: (2022)
Published: (2022)
Study on thermal shock irradiation resistance of CoCrFeMnNi high entropy alloy by high intensity pulsed ion beam
Published: (2022)
Published: (2022)
Energy Flux at the Substrate During Dual Magnetron Sputtering of TiAlN Coating
Published: (2023)
Published: (2023)
Surface microstructure and phase structure of zirconia ceramics under intense pulsed ion beam irradiation
Published: (2023)
Published: (2023)
Microstructure Formation and Mechanical Properties of Metastable Titanium-Based Gradient Coating Fabricated via Intense Pulse Ion Beam Melt Mixing
Published: (2023)
Published: (2023)
Formation features of microstructure, elemental and phase compositions of the C-Cr-Mn-V-Fe coatings under conditions of electron beam (EB) Surfacing in vacuum
by: N. K. Nina Konstantinovna Galchenko
Published: (2024)
by: N. K. Nina Konstantinovna Galchenko
Published: (2024)
Structure-phase status of the high-entropy AlNiNbTiCo alloy
Published: (2024)
Published: (2024)
High Chromium Steel Modification by the Intense Discrete Electron Beam: Structure and Properties
Published: (2018)
Published: (2018)
Surface Modification of the EBM Ti-6Al-4V Alloy by Pulsed Ion Beam
Published: (2021)
Published: (2021)
Structure and electrochemical characterization of SnOx/Sn@MWCNT composites formed by pulsed ion beam irradiation
Published: (2019)
Published: (2019)
Influence of Plasma-Immersion Titanium-Ion Implantation on the Kinetics of Hydrogen Penetration into E110 Zirconium Alloy
Published: (2018)
Published: (2018)
Influence of ion implantation on mechanical properties of U8А steel and cobalt-tungsten carbide plates
Published: (2016)
Published: (2016)
Craters on the Surface Metal After HPIB of Carbon Ions
by: Potemkin G. V. Gely Valerjyanovich
Published: (2019)
by: Potemkin G. V. Gely Valerjyanovich
Published: (2019)
The Role of Microparticles of β-TCP and Wollastonite in the Creation of Biocoatings on Mg0.8Ca Alloy
Published: (2023)
Published: (2023)
High-intensity pulsed ion beam focusing by its own space charge
Published: (2018)
Published: (2018)
Dynamic resistance signal–based wear monitoring of resistance spot welding electrodes
Published: (2024)
Published: (2024)
Structural Defects in TiNi-Based Alloys after Warm ECAP
Published: (2020)
Published: (2020)
Formation of hardened layer in WC-TiC-Co alloy by treatment of high intensity pulse ion beam and compression plasma flows
Published: (2010)
Published: (2010)
Similar Items
-
Modification of AISI 420 Steel under Repetitively Pulsed Energetic Impact on the Surface of a Powerful Ion Beam of Submillisecond Duration
by: Merzlyakov I. Ivan
Published: (2024) -
Formation of nanoscale carbon structures in the surface layer of metals under the impact of high intensity ion beam
Published: (2014) -
Dry Reforming of Methane over Ni/WC Catalysts: Effect of Ni Content and CH4:CO2 Ratio
Published: (2025) -
Influence of ablation on energy deposition in polymer material under irradiation of intense pulsed ion beam
Published: (2020) -
Study on the damage of Zr63.5Cu23Al9Fe4.5 amorphous and crystalline alloys irradiated by high intensity pulsed ion beam
Published: (2022)