Biocompatible Composites of Ultrahigh Molecular Weight Polyethylene
| Parent link: | AIP Conference Proceedings Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures.— 2015.— [020174, 5 p.] |
|---|---|
| Autor corporatiu: | |
| Altres autors: | , , , , , , , |
| Sumari: | Title screen Mechanical and tribotechnical characteristics of biocompatible, antifriction and extrudable composites based on ultrahigh molecular weight polyethylene (UHMWPE) as well as hybrid matrix "UHMWPE + PTFE" with biocompatible hydroxyapatite filler under the dry friction and boundary lubrication were investigated. A comparative analysis of effectiveness of adding the hydroxyapatite to improve the wear resistance of composites based on these two matrices was performed. It is shown that the wear intensity of nanocomposites based on the hybrid matrix is lower than that for the composites based on pure UHMWPE. Possibilities of using the composites of the polymer "UHMWPE-PTFE" mixture as a material for artificial joints implants are discussed. Режим доступа: по договору с организацией-держателем ресурса |
| Publicat: |
2015
|
| Matèries: | |
| Accés en línia: | http://dx.doi.org/10.1063/1.4932864 |
| Format: | Electrònic Capítol de llibre |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=644990 |
Ítems similars
Increasing the wear resistance of ultra-high molecular weight polyethylene by adding solid lubricating fillers
Publicat: (2014)
Publicat: (2014)
Extrudable polymer-polymer composites based on ultra-high molecular weight polyethylene
Publicat: (2017)
Publicat: (2017)
Role of Micro- and Nanofillers in Abrasive Wear of Composites Based on Ultra-High Molecular Weight Polyethylene
Publicat: (2014)
Publicat: (2014)
Tribomechanical Properties of Polymeric Composites Based on Mixture of Ultra High Molecular Weight Polyethylene and Polyamide
Publicat: (2015)
Publicat: (2015)
Wear resistance of composites based on ultrahigh molecular weight polyethylene filled with graphite and molybdenum disulfide microparticles
Publicat: (2014)
Publicat: (2014)
Influence of load and sliding velocity on wear resistance of solid-lubricant composites of ultra-high molecular weight polyethylene
Publicat: (2017)
Publicat: (2017)
Solid-Lubricant, Polymer - Polymeric and Functionalized Fiber- and Powder Reinforced Composites of Ultra-High Molecular Weight Polyethylene
Publicat: (2018)
Publicat: (2018)
The role of permolecular structure in the tribomechanical performance of extrudable polymer components of ultrahigh molecular weight polyethylene
Publicat: (2018)
Publicat: (2018)
Microfiller Influence on Structure and Properties of the Composite
Publicat: (2015)
Publicat: (2015)
Scale effects in tribological properties of solid-lubricating composites made of ultra-high molecular weight polyethylene filled with calcium stearate particles
Publicat: (2016)
Publicat: (2016)
Создание биоактивного покрытия на основе синтетического гидроксиапатита для титана медицинского назначения
per: Малышева В. А.
Publicat: (2014)
per: Малышева В. А.
Publicat: (2014)
Получение синтетического гидроксиапатита
Publicat: (2009)
Publicat: (2009)
Создание и исследование биологически активных композитов на основе синтетического гидроксиапатита и олигомеров молочной кислоты
Publicat: (2013)
Publicat: (2013)
Изучение физико-химических свойств гидроксиапатита, синтезированного с использованием ЭДТА
per: Малышева В. А.
Publicat: (2015)
per: Малышева В. А.
Publicat: (2015)
Влияние твердосмазочных материалов на свойства сверхвысокомолекулярного полиэтилена
per: Нгуен Суан Тьук
Publicat: (2015)
per: Нгуен Суан Тьук
Publicat: (2015)
Абразивная износостойкость микрокомпозитов сверхвысокомолекулярного полиэтилена "СВМПЭ"
per: Сонджайтам Н.
Publicat: (2012)
per: Сонджайтам Н.
Publicat: (2012)
Biomechanical Properties of Dispersep Article Reinforced Polymer Composites on Ultrahigh Molecular Weight Polyethylene (UHMWPE)
Publicat: (2017)
Publicat: (2017)
Исследование прочности, износостойкости и твёрдости композитов на основе СВМПЭ
per: Муленков А. Н.
Publicat: (2009)
per: Муленков А. Н.
Publicat: (2009)
Structure and tribomechanical properties of extrudable ultra-high molecular weight polyethylene composites fabricated by 3D-printing
Publicat: (2019)
Publicat: (2019)
Оценка прочности адгезии покрытия гидросиапатита на сплаве AZ91, полученного с помощью ВЧ-магнетронного распыления
per: Цапков А. В.
Publicat: (2016)
per: Цапков А. В.
Publicat: (2016)
The modification of polytetrafluoroethylene surface using hydroxyapatite coating deposited by RF-magnetron method
per: Pryamushko T. S.
Publicat: (2014)
per: Pryamushko T. S.
Publicat: (2014)
The effect of particle size of polytetrafluorethylene on properties of composites based on ultra-high molecular weight polyethylene
per: Nguen Suan Tuk
Publicat: (2016)
per: Nguen Suan Tuk
Publicat: (2016)
La synthèse de l'hydroxyapatite
per: Malysheva V. A.
Publicat: (2014)
per: Malysheva V. A.
Publicat: (2014)
Improvement of Wear Resistance of UHMWPE by Adding Solid Lubricating Fillers
Publicat: (2016)
Publicat: (2016)
A comparative study on thermal conductivity and permittivity of composites based on linear low-density polyethylene and poly(lactic acid) filled with hexagonal boron nitride
per: Lebedev S. M. Sergey Mikhailovich
Publicat: (2022)
per: Lebedev S. M. Sergey Mikhailovich
Publicat: (2022)
Износостойкие композиты на основе СВМПЭ, наполненные твердосмазочными частицами фторопласта
Publicat: (2017)
Publicat: (2017)
Influence of adding carbon and aluminum oxide nanofibers on structure and properties of ultra high molecular weight polyethylene (uhmwpe)
Publicat: (2008)
Publicat: (2008)
Применение метода взрывного испарения для нанесения кальций-фосфатных покрытий на имплантанты
per: Мальчихина А. И. Алена Игоревна
Publicat: (2010)
per: Мальчихина А. И. Алена Игоревна
Publicat: (2010)
Structure and tribomechanical properties of extrudable ultra-high molecular weight polyethylene composites fabricated by 3D-printing
Publicat: (2019)
Publicat: (2019)
Potassium layered polytitanates influence on low-pressure polyethylene properties in wide concentrations range
Publicat: (2016)
Publicat: (2016)
Исследование механических характеристик композитов на основе СВМПЭ
per: Яхин А. Альберт
Publicat: (2017)
per: Яхин А. Альберт
Publicat: (2017)
Effect of Adhesion on Mechanical and Tribological Properties of Glass Fiber Composites, Based on Ultra-High Molecular Weight Polyethylene Powders with Various Initial Particle Sizes
Publicat: (2020)
Publicat: (2020)
Composite implants coated with biodegradable polymers prevent stimulating tumor progression
Publicat: (2016)
Publicat: (2016)
Structure, as well as the Tribological and Mechanical Properties, of Extrudable Polymer-Polymeric UHMWPE Composites for 3D Printing
Publicat: (2019)
Publicat: (2019)
Возможность применения композита гидроксиаппатит/сополимер тетрафторэтилена с винилиденфторидом в травматологии и ортопедии
per: Больбасов Е. Н. Евгений Николаевич
Publicat: (2010)
per: Больбасов Е. Н. Евгений Николаевич
Publicat: (2010)
Bio resorbability of the modified hydroxyapatite in Tris-HCL buffer
per: Golovanova O. A.
Publicat: (2016)
per: Golovanova O. A.
Publicat: (2016)
Нанесение покрытий из СВМП на титановые эндопротезы
per: Филатова Л. А. Лилия Александровна
Publicat: (2007)
per: Филатова Л. А. Лилия Александровна
Publicat: (2007)
Влияние скорости скольжения и нагрузки на сопротивление изнашиванию твердосмазочных композитов на основе сверхвысокомолекулярного полиэтилена
Publicat: (2017)
Publicat: (2017)
Hybrid biocomposites for steel implants
per: Petlin D. G. Daniil Gennadyevich
Publicat: (2012)
per: Petlin D. G. Daniil Gennadyevich
Publicat: (2012)
Mechanical and tribotechnical properties of three-component solid lubricant UHMWPE composites
Publicat: (2018)
Publicat: (2018)