Solid oxide fuel cell with Ni–Al support; International Journal of Hydrogen Energy; Vol. 40, iss. 40
| Parent link: | International Journal of Hydrogen Energy Vol. 40, iss. 40.— 2015.— [P. 14077–14084] |
|---|---|
| Beste egile batzuk: | , , , , , , , , |
| Gaia: | Title screen Metal-supported solid oxide fuel cells are considered as next generation of fuel cells. In this configuration, the use of metal support allows lowering the cost of fuel cell fabrication and provides enhanced durability. The paper presents the results concerning the manufacture and research of metal-supported solid oxide fuel cells with YSZ (yttria-stabilized zirconia) electrolyte. As a metal support the porous Ni–Al plates manufactured by combustion synthesis were used. The effects of synthesis conditions and composition of the Ni–Al samples on their properties were investigated. Solid oxide fuel cells with the structure of Ni–YSZ anode/YSZ electrolyte/LSCF cathode were fabricated by the combination of screen printing, magnetron sputtering, and electron beam treatment. The cell performance was analyzed by current–voltage measurements during operation at 700, 750, 800 and 850 °C. The obtained results are very promising at such an early stage of research for the future development of this technology. Режим доступа: по договору с организацией-держателем ресурса |
| Hizkuntza: | ingelesa |
| Argitaratua: |
2015
|
| Gaiak: | |
| Sarrera elektronikoa: | http://dx.doi.org/10.1016/j.ijhydene.2015.07.151 |
| Formatua: | Baliabide elektronikoa Liburu kapitulua |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=644399 |
MARC
| LEADER | 00000nla0a2200000 4500 | ||
|---|---|---|---|
| 001 | 644399 | ||
| 005 | 20250312115024.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\9479 | ||
| 035 | |a RU\TPU\network\9272 | ||
| 090 | |a 644399 | ||
| 100 | |a 20151116d2015 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a GB | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Solid oxide fuel cell with Ni–Al support |f A. A. Soloviev [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: p. 14083-14084 (33 tit.)] | ||
| 330 | |a Metal-supported solid oxide fuel cells are considered as next generation of fuel cells. In this configuration, the use of metal support allows lowering the cost of fuel cell fabrication and provides enhanced durability. The paper presents the results concerning the manufacture and research of metal-supported solid oxide fuel cells with YSZ (yttria-stabilized zirconia) electrolyte. As a metal support the porous Ni–Al plates manufactured by combustion synthesis were used. The effects of synthesis conditions and composition of the Ni–Al samples on their properties were investigated. Solid oxide fuel cells with the structure of Ni–YSZ anode/YSZ electrolyte/LSCF cathode were fabricated by the combination of screen printing, magnetron sputtering, and electron beam treatment. The cell performance was analyzed by current–voltage measurements during operation at 700, 750, 800 and 850 °C. The obtained results are very promising at such an early stage of research for the future development of this technology. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | |t International Journal of Hydrogen Energy | ||
| 463 | |t Vol. 40, iss. 40 |v [P. 14077–14084] |d 2015 | ||
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 701 | 1 | |a Soloviev |b A. A. |c specialist in the field of hydrogen energy |c Associate Professor of Tomsk Polytechnic University, Candidate of technical sciences |f 1977- |g Andrey Aleksandrovich |3 (RuTPU)RU\TPU\pers\30863 | |
| 701 | 1 | |a Rabotkin |b S. V. |g Sergey Viktorovich | |
| 701 | 1 | |a Shipilova |b A. V. |c specialist in the field of hydrogen energy |c Researcher of Tomsk Polytechnic University |f 1982- |g Anna Viktorovna |3 (RuTPU)RU\TPU\pers\35578 | |
| 701 | 1 | |a Kirdyashkin |b А. И. |c specialist in the field of hydrogen energy |c Researcher of Tomsk Polytechnic University, Candidate of physical and mathematical sciences |f 1954- |g Aleksandr Ivanovich |3 (RuTPU)RU\TPU\pers\35577 | |
| 701 | 1 | |a Ionov |b I. V. |c specialist in the field of hydrogen energy |c Engineer of Tomsk Polytechnic University |f 1988- |g Igor Vyacheslavovich |3 (RuTPU)RU\TPU\pers\35575 | |
| 701 | 1 | |a Kovalchuk |b A. N. |c specialist in the field of hydrogen energy |c Technician of Tomsk Polytechnic University |f 1988- |g Anastasia Nikolaevna |3 (RuTPU)RU\TPU\pers\31886 | |
| 701 | 1 | |a Maznoy |b A. S. |c specialist in the field of hydrogen energy |c Researcher of Tomsk Polytechnic University |f 1985- |g Anatoly Sergeevich |3 (RuTPU)RU\TPU\pers\35573 | |
| 701 | 1 | |a Kitler |b V. D. |g Vladimir Davydovich | |
| 701 | 1 | |a Borduleva |b A. O. |c specialist in the field of hydrogen energy |c engineer of Tomsk Polytechnic University |f 1992- |g Alena Olegovna |3 (RuTPU)RU\TPU\pers\36492 | |
| 801 | 2 | |a RU |b 63413507 |c 20160407 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1016/j.ijhydene.2015.07.151 | |
| 942 | |c CF | ||