Mechanisms of surface roughening of commercial purity titanium during ultrasonic impact treatment; Materials Science and Engineering: A; Vol. 647
| Parent link: | Materials Science and Engineering: A.— , 1989- Vol. 647.— 2015.— [P. 43-50] |
|---|---|
| Համատեղ հեղինակներ: | , |
| Այլ հեղինակներ: | , , , , |
| Ամփոփում: | Title screen Using atomic force microscopy, electron backscatter diffraction and scanning electron microscopy, it is shown that surface roughening of commercial purity titanium specimens subjected to UIT is a multilevel process. It is found that the impact action of a striker and microasperities on its surface results in the formation of pile-ups of various shapes and sizes. The role of dislocation glide and twinning in deformation of commercial titanium is studied. The interaction of the primary slip bands and the secondary ones among themselves and with twin boundaries as well as the interaction between twins are demonstrated. The mechanisms of secondary twinning developing in the grains of the surface layer are revealed. Convex bending of the titanium plate caused by the relaxation of the compressive stresses essentially effects on the deformation mechanism of its surface layers. It is found that the structure fragmentation of the surface layer of the titanium plate is different during one-sided and double-sided treatment. Режим доступа: по договору с организацией-держателем ресурса |
| Լեզու: | անգլերեն |
| Հրապարակվել է: |
2015
|
| Խորագրեր: | |
| Առցանց հասանելիություն: | http://dx.doi.org/10.1016/j.msea.2015.08.086 |
| Ձևաչափ: | Էլեկտրոնային Գրքի գլուխ |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=643966 |
Նմանատիպ նյութեր
Strain-Induced Surface Roughening in Polycrystalline VT1-0 Titanium Specimens under Uniaxial Tension; Physical Mesomechanics; Vol. 21, iss. 3
Հրապարակվել է: (2018)
Հրապարակվել է: (2018)
Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment. Part I. Commercially Pure Titanium; Metals; Vol. 11, iss. 4
Հրապարակվել է: (2021)
Հրապարակվել է: (2021)
Modification of the structure of surface layers of commercial titanium in the process of treatment by low-energy high-current electron beams; The Physics of Metals and Metallography; Vol. 117, iss. 6
Հրապարակվել է: (2016)
Հրապարակվել է: (2016)
Effect of Structural-Phase State on the Deformation Behavior and Mechanical Properties of Near β Titanium Alloy VT22 in the Temperature Range 293–823 K; Physical Mesomechanics; Vol. 27, iss. 1
Հրապարակվել է: (2024)
Հրապարակվել է: (2024)
Structural-phase State of Cold Deformed Stainless Steel after High Power Pulsed Ion Beam Processing; Energy Fluxes and Radiation Effects (EFRE-2020 online)
Հրապարակվել է: (2020)
Հրապարակվել է: (2020)
Computational mesomechanics of titanium surface-hardened by ultrasonic treatment; Physical Mesomechanics; Vol. 20, iss. 3
Հրապարակվել է: (2017)
Հրապարակվել է: (2017)
The Role of Grain Boundaries in Rotational Deformation in Polycrystalline Titanium under Scratch Testing; Physical Mesomechanics; Vol. 22, iss. 5
Հրապարակվել է: (2019)
Հրապարակվել է: (2019)
Deformation behavior, fatigue and fracture surface microstructure of porous titanium nickelide; Micro and Nanosystems; Vol. 13, iss. 4
Հրապարակվել է: (2021)
Հրապարակվել է: (2021)
Titanium Alloy Surface Complex Modification; Metallurgist; Vol. 62, iss. 11-12
Հրապարակվել է: (2019)
Հրապարակվել է: (2019)
Numerical Simulation of Thermal Processes and the Effect of Heating of Near-Surface Layers of Titanium on the Diffusion Transfer of Dopants during High-Intensity Pulsed Ion Implantation; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 17, iss. 6
: Ivanova A. I. Anna Ivanovna
Հրապարակվել է: (2023)
: Ivanova A. I. Anna Ivanovna
Հրապարակվել է: (2023)
Structure Fragmentation of a Surface Layer of Commercial Purity Titanium During Ultrasonic Impact Treatment; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Հրապարակվել է: (2015)
Հրապարակվել է: (2015)
The Effect of Ultrasonic Impact Treatment on Surface Roughening of Commercially Pure Titanium during Tensile Test; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Հրապարակվել է: (2016)
Հրապարակվել է: (2016)
Mathematical model of tip oscillations: Influence on image quality; Applied Surface Science; Vol. 516
: Deeva V. S. Vera Stepanovna
Հրապարակվել է: (2020)
: Deeva V. S. Vera Stepanovna
Հրապարակվել է: (2020)
Formation of nanoscale carbon structures in the surface layer of metals under the impact of high intensity ion beam; Applied Surface Science; Vol. 310
Հրապարակվել է: (2014)
Հրապարակվել է: (2014)
Investigation of High-Intensity Implantation of Titanium Ions into Silicon under Conditions of Beam Energy Impact on the Surface; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 5
Հրապարակվել է: (2024)
Հրապարակվել է: (2024)
Multiscale Surface Roughening of Commercial Purity Titanium during Uniaxial Tension; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Հրապարակվել է: (2015)
Հրապարակվել է: (2015)
The Microstructural and Phase Evolution of the 3D Printed Ti-6Al-4V Alloy during Mechanical Loading; Physics of Metals and Metallography; Vol. 124, iss. 2
Հրապարակվել է: (2023)
Հրապարակվել է: (2023)
Titanium Surface Roughness Modification Using Ion Beam and Mechanical Method; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Հրապարակվել է: (2019)
Հրապարակվել է: (2019)
The Special Features of the Phase Formation and Distribution in the Titanium Nickelide Surface Layers Treated by Electron Beams; Russian Physics Journal; Vol. 58, iss. 5
Հրապարակվել է: (2015)
Հրապարակվել է: (2015)
Calculation of Contact Stresses during Titanium Alloy Cutting; Key Engineering Materials; Vol. 769 : High Technology: Research and Applications (HTRA 2017)
Հրապարակվել է: (2018)
Հրապարակվել է: (2018)
Features of thermal processes and the influence of pulsed heating of surface layers of titanium on the diffusion transfer of dopants during high-intensity ion implantation; Materials. Technologies. Design; Т. 5, № 3 (13)
: Gurulev A. V. Aleksandr Valerjevich
Հրապարակվել է: (2023)
: Gurulev A. V. Aleksandr Valerjevich
Հրապարակվել է: (2023)
Pulsed ion beam induced changes in a topography of the surface layers of VT1-0 and VT6 titanium alloy; Energy Fluxes and Radiation Effects (EFRE-2016)
Հրապարակվել է: (2016)
Հրապարակվել է: (2016)
Effect of the structural and phase state on the deformation behavior and mechanical properties of the ultrafine-grained titanium alloy (Ti-Al-V-Мо) at temperatures in the range of 293-973 K; Materials Science and Engineering: A; Vol. 800
Հրապարակվել է: (2021)
Հրապարակվել է: (2021)
Effect of Ultrasonic Impact Treatment on Microstructure and Mechanical Properties of Commercial Purity Titanium; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
: Hairullin (Khayrullin) R. R. Rustam Ravilievich
Հրապարակվել է: (2016)
: Hairullin (Khayrullin) R. R. Rustam Ravilievich
Հրապարակվել է: (2016)
Electron Beam Impact on Microstructure and Microhardness of Ti–6Al–4V Titanium Alloy Produced by Wire Electron-Beam Additive Manufacturing Technology and Selective Laser Alloying at Simulation of Electronic-Beam Welding; Physics of Metals and Metallography; Vol. 125, iss. 7
Հրապարակվել է: (2024)
Հրապարակվել է: (2024)
Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment Part III: Combination with Electrospark Alloying Applied to Additively Manufactured Ti-6Al-4V Titanium Alloy; Metals; Vol. 13, iss. 5
Հրապարակվել է: (2023)
Հրապարակվել է: (2023)
Electrical Conductivity and Optical Properties of Nanoscale Titanium Films on Sapphire for Localized Plasmon Resonance-Based Sensors; Coatings; Vol. 10, iss. 12
Հրապարակվել է: (2020)
Հրապարակվել է: (2020)
Investigation of the Features of High-Intensity Implantation of Nitrogen Ions into Titanium; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 17, s. 1
Հրապարակվել է: (2023)
Հրապարակվել է: (2023)
Effect of Ultrasonic Impact Treatment on Structural Phase Transformations in Ti-6Al-4V Titanium Alloy; Physical Mesomechanics; Vol. 25, iss. 3
Հրապարակվել է: (2022)
Հրապարակվել է: (2022)
Extraordinary optical transmission through titanium nitride-coated microsphere lattice; Photonics and Nanostructures - Fundamentals and Applications; Vol. 38
Հրապարակվել է: (2020)
Հրապարակվել է: (2020)
Surface evaluation of titanium oxynitride coatings used for developing layered cardiovascular stents; Materials Science and Engineering: C; Vol. 99
Հրապարակվել է: (2019)
Հրապարակվել է: (2019)
Morphological Features of Polycrystalline CdS1-xSex Films Obtained by Screen-Printing Method; Catalysts; Vol. 13, iss. 5
Հրապարակվել է: (2023)
Հրապարակվել է: (2023)
Antibacterial Activity and Cytocompatibility of Electrospun PLGA Scaffolds Surface-Modified by Pulsed DC Magnetron Co-Sputtering of Copper and Titanium; Pharmaceutics; Vol. 15, iss. 3
Հրապարակվել է: (2023)
Հրապարակվել է: (2023)
Modification of surface Ti-fiber by air, nitrogen and argon plasma on air; Energy Fluxes and Radiation Effects (EFRE-2016)
Հրապարակվել է: (2016)
Հրապարակվել է: (2016)
Surface modification of Al by high-intensity low-energy Ti-ion implantation: Microstructure, mechanical and tribological properties; Surface and Coatings Technology; Vol. 372
Հրապարակվել է: (2019)
Հրապարակվել է: (2019)
Surface Modification of Electrospun Bioresorbable and Biostable Scaffolds by Pulsed DC Magnetron Sputtering of Titanium for Gingival Tissue Regeneration; Polymers; Vol. 14, iss. 22
Հրապարակվել է: (2022)
Հրապարակվել է: (2022)
The effect of ultrasonic impact treatment on the deformation behavior of commercially pure titanium under uniaxial tension; Materials and Design; Vol. 117
Հրապարակվել է: (2017)
Հրապարակվել է: (2017)
Effect of Ultrasonic Impact Treatment on Microstructure and Fatigue Life of 3D Printed Ti–6Al–4V Titanium Alloy; Physics of Metals and Metallography; Vol. 124, iss. 10
Հրապարակվել է: (2023)
Հրապարակվել է: (2023)
Mathematical modeling of ion implantation process with account the vacancies generation; Известия вузов. Физика; Т. 57, № 10-3
: Parfenova E. S. Elena Sergeevna
Հրապարակվել է: (2014)
: Parfenova E. S. Elena Sergeevna
Հրապարակվել է: (2014)
Modeling and Experimental Study of Hysteresis during the Reactive Sputter Deposition of Titanium Oxides and Nitrides Using a Pulsed DC Magnetron; Materials Science Forum; Vol. 1065
Հրապարակվել է: (2022)
Հրապարակվել է: (2022)