Machinability of Calcium Steel in Deep Hole Drilling with Small Diameters Gun Drills; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)

Machinability of Calcium Steel in Deep Hole Drilling with Small Diameters Gun Drills; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)

Մատենագիտական մանրամասներ
Parent link:	Applied Mechanics and Materials: Scientific Journal Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014).— 2015.— [P. 116-119]
Հիմնական հեղինակ:	Kirsanov S. V. Sergey Vasilyevich
Համատեղ հեղինակ:	Национальный исследовательский Томский политехнический университет (ТПУ) Институт кибернетики (ИК) Кафедра технологии автоматизированного машиностроительного производства (ТАМП)
Այլ հեղինակներ:	Babaev A. S. Artem Sergeevich
Ամփոփում:	Title screen The information about machinability of two steel – with calcium additives and without in gundrilling are given. Experimentally determined technological characteristics of calcium steel AC41Cr4 machinability in deep hole drilling with the gun drills of diameter 2.05 mm. The results of measurement fluctuation of average diameters of holes and surface roughness are given. Microphotographs of different forms of chips after gundrilling are presented. Information about steel with calcium additives machinability was described. Режим доступа: по договору с организацией-держателем ресурса
Լեզու:	անգլերեն
Հրապարակվել է:	2015
Շարք:	Mechanical Engineering, Processing and Surface Engineereng, Metals Treatment, Equipment and Tools
Խորագրեր:	электронный ресурс труды учёных ТПУ механическая обработка шероховатости стойкость инструменты
Առցանց հասանելիություն:	http://dx.doi.org/10.4028/www.scientific.net/AMM.756.116
Ձևաչափ:	Էլեկտրոնային Գրքի գլուխ
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=641288

Նմանատիպ նյութեր

Surface precision and roughness of deep holes produced by small-diameter gun drills; Russian Engineering Research; Vol. 35, iss. 4
‌: Kirsanov S. V. Sergey Vasilyevich
Հրապարակվել է: (2015)

The study of deep holes accuracy and surface roughness after gun drilling; Mechanical Engineering, Automation and Control Systems (MEACS)
‌: Kirsanov S. V. Sergey Vasilyevich
Հրապարակվել է: (2014)

Gun-Drill Insertion in Drilling Deep Holes by Means of Multifunctional Machine Tools; Russian Engineering Research; Vol. 38, iss. 11
‌: Kirsanov S. V. Sergey Vasilyevich
Հրապարակվել է: (2018)

Study of accuracy and surface roughness of holes in comparative testing of small diameters gun drills; IOP Conference Series: Materials Science and Engineering; Vol. 66: 20th International Conference for Students and Young Scientists: Modern Techniques and Technologies (MTT'2014), Tomsk, Russia, 14-18 April 2014
‌: Kirsanov S. V. Sergey Vasilyevich
Հրապարակվել է: (2014)

Offshore drilling units; Mechanical Engineering, Automation and Control Systems (MEACS)
‌: Aikina T. Yu. Tatiana Yurievna
Հրապարակվել է: (2014)

Electric Drill Drive with Intermediate Rolling Members Reducer; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
‌: Korotkov V. S. Vladimir Sergeevich
Հրապարակվել է: (2015)

Strength and Stiffness Calculation of Small Diameter Gun Drills; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
‌: Babaev A. S. Artem Sergeevich
Հրապարակվել է: (2016)

Method, Drilling Machine, Drill bit and Bottom Hole Assembly for Drilling by Electrical Discharge by Electrical Discharge Pulses
Հրապարակվել է: ()

Automated calculation of shaft flexure for a gun drill; Russian Engineering Research; Vol. 37, iss. 7
‌: Kirsanov S. V. Sergey Vasilyevich
Հրապարակվել է: (2017)

Vibration influence on a drilling machine; Mechanical Engineering, Automation and Control Systems (MEACS)
‌: Lushnikov R. E.
Հրապարակվել է: (2014)

The system problems in the microwave measurement while drilling telemetry for controlled drilling and modeling in Matlab Simulink; Mechanical Engineering, Automation and Control Systems (MEACS)
‌: Mirmanov A. B.
Հրապարակվել է: (2014)

Optimal Cross Section of a Hard-Alloy Core for a Gun Drill; Russian Engineering Research; Vol. 36, iss. 2
‌: Kirsanov S. V. Sergey Vasilyevich
Հրապարակվել է: (2016)

Development of small diameter pilot hole directional drilling for trenchless utility installation; IOP Conference Series: Earth and Environmental Science; Vol. 43 : Problems of Geology and Subsurface Development
‌: Saruev A. L. Aleksey Lvovich
Հրապարակվել է: (2016)

Plane wave propagation through variable cross section drill rods; Mechanical Engineering, Automation and Control Systems (MEACS)
‌: Saruev L. A. Lev Alekseevich
Հրապարակվել է: (2015)

Modeling of Mechanical Behavior of Ceramic Nanocomposites; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
Հրապարակվել է: (2015)

Benchmark for FFT Libraries; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
Հրապարակվել է: (2015)

Prospects for Further Rock Cutting Mechanisms Development; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
‌: Novoseltseva M. V. Maria Viktorovna
Հրապարակվել է: (2015)

Dynamic Susceptibility of a System; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
‌: Gerget O. M. Olga Mikhailovna
Հրապարակվել է: (2015)

Mechanical Behavior of Light Alloys with Bimodal Grain Size Distribution; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
‌: Skripnyak V. A. Vladimir Albertovich
Հրապարակվել է: (2015)

Research Methods of Milling Technology Elements; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
‌: Gavrilin A. N. Aleksei Nikolaevich
Հրապարակվել է: (2015)

Influence of Crystal Defects on the Reflectivity of the Aluminum; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
‌: Umnov S. P. Sergey Pavlovich
Հրապարակվել է: (2015)

Tessellation Methods for Modeling the Material Structure; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
Հրապարակվել է: (2015)

Theoretical and Experimental Study of Led Luminaire; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
‌: Gurin S. Yu. Sergey Yurievich
Հրապարակվել է: (2015)

Utilization Prospects of Coalbed Methane in Kuzbass; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
Հրապարակվել է: (2015)

Determination of Cutting Forces in Oblique Cutting; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
‌: Filippov A. V. Andrey Vladimirovich
Հրապարակվել է: (2015)

Attenuation of Acoustic Waves in Metal Barriers; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
‌: Baganina A. E.
Հրապարակվել է: (2015)

Hardening of Metallurgical Machinery Components by Facing with Heatproof, Hard Steels and Low Temperature Pre-Heating; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
Հրապարակվել է: (2015)

Mechanical Properties of Spun Castings of Multicomponent Bronze Depending on the Casting Conditions; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
‌: Korchmit A. V. Anton Viktorovich
Հրապարակվել է: (2015)

Computer Simulation of Strain at Drilling with PDC Bits; Applied Mechanics and Materials; Vol. 770 : Urgent Problems of Up-to-Date Mechanical Engineering
‌: Burkov P. V. Petr Vladimirovich
Հրապարակվել է: (2015)

Frequency Domain Sensors and Frequency Measurement Techniques; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
Հրապարակվել է: (2015)

Adaptive Structural Reconfigurable Algorithms of Control Abstract; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
‌: Shidlovskiy S. V. Stanislav Viktorovich
Հրապարակվել է: (2015)

Mathematical Modeling of Pulsed Electric-Sintering Powders; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
Հրապարակվել է: (2015)

Mandrelling with high allowances as a method of finishing treatment of small diameter deep holes; The 7th International Forum on Strategic Technology (IFOST-2012), September 18-21, 2012, Tomsk
Հրապարակվել է: (2012)

Diffusion and Mechanical Stresses in a Material with Two-Component Coating at External Heating; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
‌: Chepak-Gizbrekht M. V. Mariya Vladimirovna
Հրապարակվել է: (2015)

Distribution of Au and Pd in basalts and diabases in hole 504b; Proceedings of the Ocean Drilling Program, Scientitic Results
‌: Korobeinikov A. F. Alexander Feopenovich
Հրապարակվել է: (1999)

Combined Steel Treatment with Calcium-Silicon; Applied Mechanics and Materials; Vol. 770 : Urgent Problems of Up-to-Date Mechanical Engineering
Հրապարակվել է: (2015)

The Influence of Parameters of Microarc Oxidation on the Surface Roughness and Wettability of Calciumphosphate Coatings; Applied Mechanics and Materials; Vol. 1097 : Nanomaterials and Surface Technologies, Materials Applications
‌: Chebodaeva V. V. Valentina Vadimovna
Հրապարակվել է: (2015)

Hydrate Control in Drilling Mud
‌: Lal, Bhajan, և այլն
Հրապարակվել է: (2022)

Theory and Technology of Drilling Engineering
‌: Guan, Zhichuan, և այլն
Հրապարակվել է: (2021)

Technical Diagnosis of Internal Combustion Engines in the Parameters of Vibration; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
‌: Syrbakov A. P.
Հրապարակվել է: (2015)